Question about 2005 Suzuki Forenza

1 Answer

How much will i pay to replace the timing belt in a 2005 suzuki forenza

Posted by on

1 Answer

Have to ask the repair shop of your choice

There is no standard price for any vehicle
repair & your asking people on the web from
all over the world with different currency

Posted on Jan 24, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

boysor2933
  • 293 Answers

SOURCE: 2005 suzuki forenza My car will not start up.

Check if the kill switch is engaged. Check for faulty starter solenoid or disconnected solenoid wire. Check for defective ignition switch. Check for defective starter motor.

Posted on Aug 10, 2009

  • 93 Answers

SOURCE: 2005 Suzuki Forenza timing belt breakage

hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart

Posted on Feb 10, 2010

Testimonial: "Really Fast Reply with very good information. THANKS!!"

  • 90 Answers

SOURCE: I WANT TO KNOW THE TIMING MARKS FOR SUZUKI FORENZA

just mark the pulleys with tip-ex ,same thing and youd be finished in half the time

Posted on Feb 21, 2010

emissionwiz
  • 75744 Answers

SOURCE: I need to have the timing belt replaced on my 2006

about 2.5 hours

Posted on Mar 03, 2010

  • 701 Answers

SOURCE: When do I need to replace the timing belt? My

Hello michele151: My name is Roger and I will answer your question. The manufacturer recommends replacing the belt at 60,000 miles and inspecting the belt at 30,000 miles. This would also be a good time to check the water pump as the timing belt turns it also. I always recommend replacing the timing belt with a timing kit as this way you also have the parts to replace the idler bearings at the same time. these are small bearings that turn a million times and do wear out. Should you need further help please just ask. Please rate the answer as this way I know it was of use. Thank You for using Fix Ya. Roger

Posted on Mar 15, 2010

Testimonial: "Great, thank you for the very detailed answer."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing belt


alldata.com
its 50 steps, im not typing them
direct link

http://www.scantool.net/software/alldata-diy-1-month-subscription.html

Dec 01, 2013 | 2005 Suzuki Forenza

1 Answer

What has to come off to get to the timing belt on 2007 Suzuki forenza?


see you tube, there is a really good vid, on that. nothing better.
or buy the FSM and read that.
if smart, use both.

Feb 16, 2013 | 2005 Suzuki Forenza

1 Answer

I replaced the timing belt on a 05 suzuki forenza and not i cannot figure out which mark to use on the exhaust cam pulley


  • Hear are the timing marks fora a 2005 Suzuki Forenza 2.0

  • Crankshaft gear to the bottom of the rear timing belt cover ----


ironfist109_352.jpg


  • Camshaft gear to Camshaft cover ---

ironfist109_353.jpg


  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 10, 2011 | 2005 Suzuki Forenza

1 Answer

2005 Suzuki Forenza timing belt breakage


hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart

Feb 10, 2010 | 2005 Suzuki Reno

2 Answers

I Need step by step instructions for replacing the camshaft position sesor on a 2005 suzuki forenza


THE EASIEST WAY IS TO GO TO YOUR LOCAL AUTO RETAILER AND BUY THE REPAIR MANUAL FOR THAT VEHICLE. PAY A BODYSHOP FOR THE INSTRUCTION

Aug 04, 2008 | 2004 Suzuki Forenza

Not finding what you are looking for?
2005 Suzuki Forenza Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...