Question about 1989 Honda Civic
Ive got a integra b16a ready to strip so what i wana know is will it fit straight into a 3 door civic 89 90 hatchback?? and how hard will it be for the wiring side of things? can u also tell me bowt cv axles and will i use then civic ones or integra ones and will they fit into civic wheel hubs? thanks
Best to go to honda-tech.com and READ the articles before posting. Really GREAT source for motor swaps.
From what I know, it should drop into a 90 HB. You many need motor mounts. You will need CV axles. I'm guessing it would be easier to bring over the harness and ECU from the teg.
Posted on Aug 21, 2009
The swap is easy but too much to post here. I will fit into any civic 89-00 with the right aftermarket mounts from hasport or just go to ebay. The engine harness can be purchased at a local juck yard if you don't have a harness with 4 injectors. I you have only two injectors then the harness will need to be modified with vtec wiring and ad the other 2 injectors. Any 90-93 integra axles will fit as long as you use the halfshft. Must be manual. and use a modified shif linkage from ebay. Youmust take off the caps behind the civics hubs. Use a PWO or PR3 ECU. Good luck.
Posted on Jun 27, 2009
J1/S1 Found in: Integra XSI/RSI (DA6) Type: Cable 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400 Y1 Found in: CRX/Civic (optional LSD) Type: Cable 1st: 3.166 2nd: 2.052 3rd: 1.416 4th: 1.103 5th: 0.870 R: 3.000 FD: 4.266 YS1 Found in: Integra 92-93 XSI/RSI (DA6, DA9) Type: Cable 1st: 3.307 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.880 R: 3.000 FD: 4.400 S80 Found in: Integra Type R 98+ (LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.785 S80/Y80 Found in: JDM SiR-G (optional LSD) Type: Hydraulic 1st: 3.230 2nd: 1.900 3rd: 1.360 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.400 Y21/Y80/S80/S4C Found in: JDM 96-97 Integra R(LSD) JDM Civic R [EK9](LSD) JDM Civic SiR [EK4, EG6] JDM CR-X DEL SOL SIR (EG2)(optional LSD) USDM DEL SOL VTEC (EG2)(OPTIONAL LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400
Posted on Jun 08, 2009
SOURCE: how do i change the
take out the bolts that hold the struts ***. to the spindles. tie rod loose -brake caliper off pull out off way after taking nut off at the end of axle. pry bar pop axle out of trans.
Posted on Nov 12, 2010
Tips for a great answer:
Mar 20, 2014 | Cars & Trucks
on Jan 28, 2011 | Honda Civic Cars & Trucks
Jan 03, 2014 | 1994 Honda Civic Del Sol
Jul 28, 2010 | 1997 Honda Civic del Sol
Dec 15, 2009 | 1993 Honda Civic 4 Door
Sep 15, 2009 | 1991 Acura Integra Hatchback
Jun 08, 2009 | 1990 Honda CRX
Mar 12, 2009 | 1986 Honda Civic
May 22, 2014 | 1989 Honda Civic
301 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: