Question about Cars & Trucks

1 Answer

1997 acura cl ABS light turn on Howe can I reset it?

Posted by on

  • 1 more comment 
  • Marcos R Jan 24, 2013

    I replaced the part module and wanted to reset the light. the light doesn't turn on when I first star the car in the morning but later on the day when I turn the car again the light goes on again.

  • Anonymous Jan 24, 2013

    Then you didn't find & resolve the real issue by replacing whatever you did. Have to have reference material & follow trouble charts & test things to work on a car

  • Marcos R Jan 24, 2013

    what do you recommend doing since I don't have the code reader to clear codes?

×

1 Answer

Was a repair of the ABS System done & the shop
didn't clear the codes?

You don't reset much on a car,you clear data & that
turns off the check light

That doesn't fix a problem & removes the data
needed to do

If you don't want to chance loosing the radio or
having a car on security lock out ,you use a code
reader to clear codes,unless you know the system
& the consequences

Posted on Jan 24, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 43 Answers

SOURCE: 1997 Acura CL 3.0 Transmission recall

they install an inline filter on one of the cooling lines as part of the recall

Posted on Sep 24, 2008

  • 87 Answers

SOURCE: Reset check engine light

You can do several Things to reset your check engine light. One is to simply pull the positive side of your battery cable off of the battery. Im going to say to just leave it off for about two minutes then place it back on tighten it down and your done. The other way is to bye a check engine light decoder. Are find one from a friend any way it has a reset option on it that will reset it. Ok your welcome good luck and may the force be with you.

Posted on Oct 07, 2008

  • 2 Answers

SOURCE: SRS light on 1997 acura CL

1.bend a paperclip into a u shape. 2.disconnect the yellow plug in your fuse box under the steering wheel and insert the paperclip into the plug that is now hanging there to complete the circuit.3.turn the ignition on and the srs light will stay on for 6 seconds, then turn off.disconnect the paperclip within 4 seconds after that and the light will come back on.4. reconnect the paperclip within 4 seconds and the srs light will turn off again.5.within another 4 seconds of it going off, disconnect the paperclip and the light will blink letting you know that you have completed all the steps right. you can also use some speaker wire

Posted on Mar 20, 2009

ginko
  • 19396 Answers

SOURCE: 97 acura CL ABS light goes on

The ABS light can be on for different reason.
sometimes a bad speed sensor on one of the wheels can trigger the ABS light.
The ABS module, or the entire braking sytem may be faulty, to find out there is need to test the ECU/ABS modules usinga code reader, and to inspect the braking system.

Posted on Jul 01, 2009

c17hydro
  • 2984 Answers

SOURCE: how to locate the thermostat for a 1997 acura 2.2

Removal & Installation

  1. Disconnect the negative battery cable.
  2. Drain the cooling system into a suitable container.
  3. Locate the thermostat housing by following the upper radiator hose to the engine.
  4. Loosen the hose clamps then carefully detach the hose from the fitting.
If the hose is stuck, carefully use a pick to break the seal between the radiator hose and the housing. If the hose is deteriorated, replace it with a new one.
  1. Disconnect any sensors or switches that may interfere with the removal of the thermostat from the housing.
f163710.gif
Remove the thermostat housing bolts

120abfd.gif
Pull the water outlet neck away from the housing

d9be9b2.gif
Note the installed position of the thermostat, then remove it

  1. Unfasten the retainers, then remove the thermostat housing.
Some coolant may leak out of the housing as the seal is broken.
  1. Remove the thermostat carefully noting how it's installed.
  2. Clean the mating surfaces of the thermostat housing.
Many thermostat housing's are made out of aluminum alloy. A plastic scraper is very effective and will not harm such metals.
To install

1c8dd82.gif

A new gasket must be installed before installation

c732e7b.gif
Install the thermostat with the air bleed valve at the top

  1. Install the new thermostat and gasket.
Install the thermostat with the jiggle pin facing up. This acts as an air bleed and must be at the top of the thermostat to operate properly.
  1. Install the thermostat housing, then tighten the bolts securely.
  2. Connect the radiator hose and tighten the hose clamps securely.
  3. Install any remaining components, then refill the cooling system.
  4. Start and run the engine until it reaches normal operating temperature while checking for leaks.

Posted on Nov 03, 2009

Testimonial: "thank you very much on the solution, didn't take as long as i expected!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 feels like it is in second and then after 10 minutes kicks into third


Sounds like sluggish movment inside the transmission. I would recommend a transmission flush and refill, depending on the severity of the amount of sludge you may have to repeat.

Nov 09, 2013 | 1997 Acura CL

1 Answer

97 accura ABS light comes on after start up and will not turn off.


You might want to take your car to Autozone and have them perform a free scan to bring a code and give a starting point.

Apr 13, 2013 | 1997 Acura CL

1 Answer

1997 acura cl abs light is on


One of your wheel hubs/bearings are going bad. This is what your ABS sensor is tied into.

Jan 24, 2013 | 1997 Acura CL

1 Answer

97 Acura cl abs light on? What does this mean and how to fix


This indicates a problem with the anti-lock brake system, make sure fluid levels are correct, but it is likely that a sensor at one of the wheels has disconnected, causing the light to go on. If you have driven over road debris, snow, ice, etc. something may have damaged a sensor at one of the wheels. Jack up the car and support it to safely go underneath to inspect all 4 wheels at the back sides for damage.

Dec 18, 2009 | 1997 Acura CL

3 Answers

Both abs and traction control light stays on also spedo not working have checked all related fuses all ok have tried to scan with both snapon solus and launch x431 niether will communicate with abs ecu but...


had my 2000 chev impala 3.8 liter ,traction control llight and abs light both go on the reset it and go right back on .so i replaced both sides of the bearing hub assembly this is connected the senser,so far so good.replaced it dec 21 2009 about 3 hours ago. because the assembly came appart when took off.

Oct 30, 2009 | 1997 Acura CL

1 Answer

97 acura CL ABS light goes on What are the potential fixes?


The ABS light can be on for different reason.
sometimes a bad speed sensor on one of the wheels can trigger the ABS light.
The ABS module, or the entire braking sytem may be faulty, to find out there is need to test the ECU/ABS modules usinga code reader, and to inspect the braking system.

Jul 01, 2009 | 1997 Acura CL

2 Answers

SRS light on 1997 acura CL


1.bend a paperclip into a u shape. 2.disconnect the yellow plug in your fuse box under the steering wheel and insert the paperclip into the plug that is now hanging there to complete the circuit.3.turn the ignition on and the srs light will stay on for 6 seconds, then turn off.disconnect the paperclip within 4 seconds after that and the light will come back on.4. reconnect the paperclip within 4 seconds and the srs light will turn off again.5.within another 4 seconds of it going off, disconnect the paperclip and the light will blink letting you know that you have completed all the steps right. you can also use some speaker wire

Feb 01, 2009 | 1997 Acura RL

3 Answers

Speedo not working and tc and abs lights on


2000 vectra the dash light and fog lights dont work can you help

Nov 23, 2008 | 1997 Acura CL

1 Answer

1997 Acura CL check engine light still on


have autozone scan it they can give you the codes hope it helps its freee

Sep 18, 2008 | 1997 Acura CL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...