Question about 2005 Ford Taurus

2 Answers

Cant take off the windsheild wipers - 2005 Ford Taurus

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 140 Answers

Here is the procedure to remove the wiper motor. It says to remove wipers by removing the nut covers then remove the wiper nuts. Is this what your talking about?
If your talking about the wiper arms they just pop off at the swivel.
Use this link for info on removing blade assy.
http://www.autozone.com/az/cds/en_us/0900823d/80/04/f8/26/0900823d8004f826/repairInfoPages.htm

Wiper Motor
Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Park the wiper pivot arms in the highest position on the glass.
  3. Disconnect the battery ground cable.
  4. Remove the wiper pivot arm nut covers.
  5. Remove the nuts and the wiper pivot arms.
  6. Remove the cowl top vent panels.
  7. Remove the four bolts, wiper mounting arm and wiper pivot shaft assembly.
  8. Disconnect the electrical connector.
  9. Remove the bolt and the windshield wiper motor operating arm from the motor.
  10. Remove the three bolts and remove the windshield wiper motor.
  11. To install, reverse the removal procedure.

Posted on Jan 28, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Are talking about the arms of the wipers or the wiper blade if it is the blade you need to flip the wiper and just pull and side out/ if you are talking about the whole arm there is a bolt that you need to take off to get the arm off/let me know if you still need help/ Please rate my response thank you very much

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I moved my windsheild wiper arms to remove the snow. now the driver side windsheild wiper keeps going off the wind sheild


Where is the blade when switch is off? Some of the GM cars in the 2000 years had problems with the post where the wiper arm attaches. The post will strip the groves when trying to move heavy snow. You will have to remove the arm, and reinstall it when the wiper switch is off.

Mar 11, 2015 | 2000 Pontiac Grand Prix

1 Answer

Lifted thewindshield wiper arm to clean window now i cant get it togo down this is mercedes 300e


push down harder than you think is safe. it'll go CLICK back
it takes a good amount of force to bring it down. You need to push pretty hard ,put a rolled up cloth under it to protect the windshield and the arm's mechanism as well.

Sep 14, 2012 | Cars & Trucks

1 Answer

Windsheild Wipers will not move, the arm seems to be slipping on the motor shaft,


It sounds like you live in a climate were snow and ice occurs. If so a lot of people leave their wipers on upon shutting off their cars. If you happen to do that and the windsheild had moister on it or if the snow starter falling while your vehicle was still warm it will freeze. The larger the snow amount the stronger the force will be if you start your vehicle up the next morning with your wipers buried in frozen ice & snow. Since the wipers were not shut off the wiper motor will run and the wiper blades will not. This will strip the linkage the wiper arms press onto leaving you with out working windsheild wipers

Jan 27, 2010 | 2003 Chevrolet Tahoe

1 Answer

Windshild wipers stop intermittingly seems to


your windsheild wiper problem is the wiper module. replace the windsheild wiper module and you'll fix this problem.

Jan 21, 2010 | 1997 Chevrolet S-10 Pickup

1 Answer

Put in a new wiper motor 1997 e39 528i bmw\it stops in the middle


Remove arm(s), put wiper motor in park,(shut off) then re-install arm at base of windshield where they were before,when shut off.(in park position.)

Sep 26, 2009 | 1997 BMW 318

1 Answer

Windsheild wiper washer hose ''t''


Any part store should have a plastic vac T that will work for washer fluid as well.

Mar 28, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Y windsheild wipers don't move. I hear the


Possible stripped gears or the gears are not making contact.  I would replace the wiper motor.  If you can, and I am not sure, you might be able to replace just the gears.  But given how new the car is, I am sure it comes as an "all in one" unit.  It is possible to seatch www.car-part.com and see if there is a salvage yard around your area that has one cheap.

Mar 03, 2009 | 2006 Pontiac G6

1 Answer

Wiper arm assembly mechanism


I THINK YOU SHOULD TURN OFF WIPERS TAKE WIPER ASSEMBLY OFF PUT BOTH ON AT LOWEST POINT ON WINDSHEILD, TRY THAT.

Sep 05, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
2005 Ford Taurus Logo

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...