One of your wheel hubs/bearings are going bad. This is what your ABS sensor is tied into.
SOURCE: SRS light on 1997 acura CL
1.bend a paperclip into a u shape. 2.disconnect the yellow plug in your fuse box under the steering wheel and insert the paperclip into the plug that is now hanging there to complete the circuit.3.turn the ignition on and the srs light will stay on for 6 seconds, then turn off.disconnect the paperclip within 4 seconds after that and the light will come back on.4. reconnect the paperclip within 4 seconds and the srs light will turn off again.5.within another 4 seconds of it going off, disconnect the paperclip and the light will blink letting you know that you have completed all the steps right. you can also use some speaker wire
SOURCE: Reset check engine light
You can do several Things to reset your check engine light. One is to simply pull the positive side of your battery cable off of the battery. Im going to say to just leave it off for about two minutes then place it back on tighten it down and your done. The other way is to bye a check engine light decoder. Are find one from a friend any way it has a reset option on it that will reset it. Ok your welcome good luck and may the force be with you.
SOURCE: transmission dipstick location
Sorry, I'm just now getting it to you. The dipstick is located on the passenger side of the car way down at the bottom. It should have a yellow handle. It's just to the right and down of the battery. Let me know if you can't find it still and I will get you a picture somehow.
SOURCE: 97 acura CL ABS light goes on
The ABS light can be on for different reason.
sometimes a bad speed sensor on one of the wheels can trigger the ABS light.
The ABS module, or the entire braking sytem may be faulty, to find out there is need to test the ECU/ABS modules usinga code reader, and to inspect the braking system.
SOURCE: have 1997 Acura CL.. need radio code. Acura
Remove the ash tray and the code is on the back of the ash tray.
614 views
Usually answered in minutes!
×