Question about 2001 Subaru Outback

1 Answer

How to change quarter glass on 2001 outback - 2001 Subaru Outback

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Heat up a hack saw blade really hot to melt the glue while cutting through it may take some time to do this .

Posted on Jan 24, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 Subaru Outback Station Wagon Driver Side Quarter Window Needs Replaced


if you go to your local auto parts store they sell repair books find your then read it

May 15, 2017 | 2000 Subaru Outback

1 Answer

2001 outback automatic stall.


When you changed the ****** fluid was it brown? If so I regret to inform you, you may need a new transmission. The brown color is due to the clutches in the trans, wearing down over time. Does it shift hard when you drive it? If it does that is another sign the trans has gone out the window.

Jul 19, 2012 | 2001 Subaru Outback

1 Answer

Low fuel pressure light 2001 subaru outback


Hi have you changed your fuel filter lately? That would be where i would start first, other causes could be fuel pump or blocked fuel lines, but i would start with a new fuel filter as thats the easiest, cheapest option

Apr 14, 2012 | 2001 Subaru Outback

1 Answer

Does a 2001 2.5 subaru outback have dual mass flywheel or solid flywheel??


honestly dont know offhand but what i do with some of these vehicles that do have one is when changing a clutch i weld the thing together so they dont give future problems

Sep 17, 2010 | 2001 Subaru Outback

1 Answer

2003 subaru outback mirror glass replacement


You need some bathtub silicone sealer and some black electrical tape and a couple of small wooden blocks. Carefully break out the cracked mirror. WEAR gloves and glasses when you do this and have a bucket to catch the falling glass. Make sure the mirror back is clean and put a bead of silicone around the back of the new mirror. Keep it about 1/4 inch from the edge and some dabs in the center portion. Place the mirror on the back and tape one edge down using a wooden block for a spacer. Then do the other side. Make the tape snug so it squashes the silicone and leave the mirror alone for 24 hours. After that take the tape and blocks off and you are good to go. Hope this helps.

Jan 07, 2010 | 2002 Subaru Outback

2 Answers

Change light bulb in fog light on 2003 subaru outback wagon


remove lower cover, remove cover on back of lamp and disconnect wire then unhook clip (clip just swings to the side) and remove bulb. dont touch new bulb on the glass part ,will weakin life of lamp. goodluck.

Oct 19, 2009 | 2003 Subaru Outback

1 Answer

2001 Subaru Outback tail lights don't work


do you have a trailer hitch? if yes disconnect convertor box the light behind the dash should not be related bulb just out, also make sure bulbs you've changed are correct

Jun 09, 2009 | 2001 Subaru Outback

1 Answer

R/H rear quarter window repalcement


tv is the wrong adhesive. you must use urethane with a primer. it is available at any QUALITY parts store (NAPA or Carquest comes to mind)


Material Item Specification Urethane Metal Primer Essex U-413
WSB-M2G234-C Urethane Glass Prep Essex U-401
WSB-M5B280-C Urethane Glass Primer Essex U-402
WSB-M2G314-B Urethane Adhesive Essex 400-HV
WSB-M2G316
Removal
All vehicles
ani_caut.gif WARNING: To prevent glass splinters from entering the eyes or cutting the hands, wear safety glasses and heavy gloves when cutting the glass from the vehicle.
  1. Remove the C-pillar trim panels. For additional information, refer to Section 501-05.
3-Door, 5-Door
  1. ani_caut.gif CAUTION: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
    NOTE: Some resistance may be encountered when cutting through the glass locating pegs in the lower corners of the glass.
    NOTE: Lubricate the existing urethane adhesive with water to aid the special tool while cutting.
    Using the special tool, place the flat side of the knife against the quarter glass window. Start at the top and work towards the corners cutting to the given maximum depths:
    1. 20 mm
    1. 60 mm
    1. 75 mm
    1. 90 mm
    a0074767.gif
Wagon
  1. ani_caut.gif CAUTION: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
    NOTE: Some resistance may be encountered when cutting through the glass locating pegs in the upper right and lower left corners of the glass.
    NOTE: Lubricate the existing urethane adhesive with water to aid the special tool while cutting.
    Using the special tool, place the flat side of the knife against the quarter glass window. Start at the top and work towards the corners cutting to the given maximum depths:
    1. 20 mm
    1. 30 mm
    1. 50 mm
    1. 40 mm
    a0074768.gif
4-Door
  1. ani_caut.gif CAUTION: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
    NOTE: Some resistance may be encountered when cutting through the glass locating pegs in the upper right and lower left corners of the glass.
    NOTE: Lubricate the existing urethane adhesive with water to aid the special tool while cutting.
    Using the special tool, place the flat side of the knife against the quarter glass window. Start at the top and work towards the corners cutting to the given maximum depths:
    1. 20 mm
    1. 25 mm
    1. 45 mm
    1. 50 mm
    1. 55 mm
    1. 70 mm
    1. 150 mm
    a0074769.gif
All vehicles
  1. Remove the rear quarter window glass.
  1. Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.
Installation
ani_caut.gif CAUTION: When installing urethane installed glass parts, the vehicle must not be driven until the urethane adhesive has cured. At temperatures above 21°C (70°F) and relative humidities above 50%, adequate cure time is typically 24 hours. (Refer to Essex drive away chart for the cure times as temperatures and humidity vary.) Inadequate or incorrect curing can adversely affect the retention of the quarter window glass.
  1. NOTE: Avoid scratching the pinch weld.
    Trim the remaining urethane adhesive. The urethane adhesive must be smooth and free of cuts and contamination after trimming. Avoid touching the urethane adhesive after preparation.
    a0005586.gif
  1. Apply the urethane metal primer to any exposed or damaged metal on the pinch weld.
  1. If reinstalling the original rear quarter window glass, remove the excess urethane adhesive.
  1. Clean the rear quarter window glass with a non-alcohol based window cleaner.
  1. ani_caut.gif CAUTION: Wipe off the urethane glass prep immediately after each application because it flash dries.
    If installing a new rear quarter window glass, apply urethane glass prep twice around the glass surface to be urethaned.
  1. If installing a new rear quarter window glass, apply urethane glass primer to the same area that was prepped in the previous step. Allow 5 minutes to dry.
  1. Cut the urethane adhesive applicator tip to specification.
    a0016835.gif
  1. Apply a bead of urethane adhesive on top of the existing urethane bead on the pinch weld. Make sure that all gaps in the urethane adhesive are smoothed into one continuous bead.
  1. Position the rear quarter window glass to the flange, and press the retaining tabs into the flange to engage.
    an0459b.gif
  1. Install the rear quarter window glass.
  1. Check the rear quarter window glass installation for air or water leaks through the urethane seal.
  1. Install the C-pillar trim panels. For additional information, refer to Section 501-05.

May 29, 2009 | 2004 Ford Focus

2 Answers

2001 subaru outback shake when braking


this problem is due to out of true front disk brake rotors (u need 2), your best bet is to replace them at this mileage Here is a part number and price from rockauto.com PRICE $28.79 (US)

ACDELCO Part # 18A346 {replaces 18027946 #18027946, 19171459}

Apr 27, 2009 | 2001 Subaru Outback

Not finding what you are looking for?
2001 Subaru Outback Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...