Question about 1989 Ford Probe

Open Question

Where is the1989 ford probe automatic transmission filter located?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 272 Answers

SOURCE: 94' Ford Probe Automatic Transmission fluid check question

The car needs to be running with the transmission warm, (drive around for at least 10 minutes) Place the car in neutral. Pull the stick wipe it off and place it back in the transmission. Reads just like an oil stick, want fluid in the safe range (checked pattern) area.

Posted on May 12, 2009

c17hydro
  • 2984 Answers

SOURCE: location of fuel filter on 1995 ford probe

On all models except the Millenia, the fuel filter is attached to a bracket located in the left rear of the engine compartment, next to or beneath the brake master cylinder fluid reservoir.

Posted on Jul 12, 2009

wfservices
  • 260 Answers

SOURCE: trying to change transmission filter out on a 1997

159 7A100 Main Control 160 7H249 Oil Filter Recirculating Regulator Exhaust Seal 161 7A098 Oil Filter and Seal Assy

ff4e84a.gif

Posted on Mar 11, 2010

  • 7 Answers

SOURCE: need to know placement of transmission pan, automatic, filter in or out?

the pan for the probe transmissions is actually on the front of the transmission. most people have to loosen the transmission to remove it. and ford probes do not have a "filter". they have a screen.

Posted on Apr 14, 2010

dncholas
  • 222 Answers

SOURCE: 1990 Ford Probe 2.2 automatic stalls in forward, reverse OK

Sounds like a bad IAC (idle air control valve/sensor) that controls your idle when going from throttle to idle. If bad your idle will act crazy and can cause stalls easily. Pretty sure that's it.

Posted on Aug 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't locate my crankshaft sensor on my 1995 ford probe


Look on the link below. There's a few images which will help you locate that sensor:

location of 1995 ford probe crankshaft sensor Google Search


The sensor will be located located where the engine attaches to the transmission. Have a look around where the engine attaches to the transmission .. top, sides and underneath. The crankshaft sensor will have a minimum of 1 wire attached.

You'll locate it easily

Apr 22, 2016 | Ford Cars & Trucks

2 Answers

Locate transmission filter on 2002 ford escape


The '02 Ford Escape doesn't have a transmission (automatic or manual transaxle) fluid filter or even a fluid pan to house one. The transmission is mounted between the drive axle and intermediate axle, directly below the yellow transmission fluid dipstick. No need to mess with it. Change your trans. fluid at the regular specified mileage. If the fluid on the dipstick is clear, it's good. If reddish or rusty or dark, change asap.

Jun 01, 2014 | 2002 Ford Escape

1 Answer

The 1995 ford probe will not accelerate after a complete stop, I give it gas and the car revs in drive without moving forward, does this particular problem have anything to do with the fuel injection, or...


it is a transmission issue which are no stranger to ford probes, not sure exactly what part is faulty inside the transmission but in most cases with that vehicle it is not do it yourself, the only thing you can try is replacing the filter and fluid in the pan.

Oct 10, 2012 | 1995 Ford Probe

1 Answer

Should i try to flush my transmission first on my 94 ford probe 2.0 before replacing the filter and where is the filter located. does it have a filter or screen?


you can flush or by removing the pan, on the side of transmission. it has no filter,per se, it was what we call filter screen. you don't need to replace the filter, simply clean it.

Feb 27, 2012 | Cars & Trucks

1 Answer

Where is transmission filter located


Generally, this is located inside the trans; you will need take off the inferior cover to check it or replace it.

Hope helps.

Feb 23, 2012 | 1996 Ford Probe

1 Answer

I have a 1994 Ford probe. On the automatic transmission. The reverse gear don't. Work


Sounds like you need new bands in transmission.,as old as it is they are more then likely ***** out. good luck to ya.

Mar 27, 2011 | 1994 Ford Probe

1 Answer

1994 Ford probe GT 2.5 automatic, 4eat tranny What cause my transmission to slip from 3rd and 4th when hot? How do you fix the problem ?


It is going bad, it is 16 and anything past 10 years on a transmission is good. You need to get it rebuilt, or swap it for a rebuilt one. Not going to be cheap.

Feb 28, 2011 | 1995 Ford Probe

2 Answers

94' Ford Probe Automatic Transmission fluid check question


The car needs to be running with the transmission warm, (drive around for at least 10 minutes) Place the car in neutral. Pull the stick wipe it off and place it back in the transmission. Reads just like an oil stick, want fluid in the safe range (checked pattern) area.

May 12, 2009 | 1995 Ford Probe

2 Answers

Need to know placement of transmission pan, automatic, filter in or out?


Trans pan is going to be the very lowest part of your transmission. The filter swap is just slightly concerning. Not to be rude, but you might want to have an assistant that is familiar with trans basics to walk you thru the first one if locating the pan was difficult.
If you feel that the filter swap is something you would like to do, start out by getting the filter kit and reviewing the included instructions. If they are not able to give a full and detailed explanation, they sometimes include a number to call. Dont bother. Just come back here and ask!
Automatic transmissions do not come with a drain plug. You will need to loosen all the small bolts around the edge except for one, to keep the entire pan from crashing to the ground and splashing oil everywhere. pull the edge down and into the drain pan goes the trans fluid. The filter is right under the pan. Cant miss it.

It is real important to be as clean as possible. No contaminants in the trans. If you can, pressure wash the area first and stay operating room clean!
Good Luck to ya

Apr 29, 2009 | 1995 Ford Probe

1 Answer

Automatic transmission


with it sitting for a year the filter is probably restricting the fluid flow

Oct 21, 2008 | 1991 Ford Probe

Not finding what you are looking for?

Open Questions:

See all 1989 Ford Probe Questions

Cars & Trucks Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...