Question about Cars & Trucks

Open Question

What is the torque setting for a volvo b7tl rear wheal bearing

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 34 Answers

SOURCE: torque settings for wheel bearing

120Nm on all A3s with standard wheels.

Posted on Jan 22, 2009

  • 2 Answers

SOURCE: what torque for rear wheel bearing Ford Focus 2000

Can only find out that the hub needs to be tightened to
235 nm Dunno if this helps

Posted on Jan 27, 2009

  • 101 Answers

SOURCE: Torque setings

if it is a solid bearing do it up as tight as you can.if it is a tapered bearing do it up untill the nut is touching the bearing check the hub for play if you have got play do the nut up a bit more until the play is gone in the hub.make sure you do not over tighten the bearing or the wheel will not turn freely.the wheel needs to spin with no drag.

Posted on Jul 31, 2009

  • 265 Answers

SOURCE: replaced rear wheel bearings 2006 Volvo S60 and ABS lite stays on

Make sure the abs sensor is plugged in all the way.. And also make sure that the abs ring.. was not damaged in the process of putting on the new bearing...

Posted on Mar 02, 2010

  • 3489 Answers

SOURCE: Rear wheel bearing torque settings for a Focus 02

The proper setting is 49 ft lbs(66Nm). Let me know if you need anything else.

Posted on Apr 22, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine Torque Specs for 1996 850 glt volvo rod bearings

15 ft lbs then angle torque 90 degrees

May 13, 2014 | 1996 Volvo 850

1 Answer

Front left spindle removal/installation on a 1998 ford explorer 4X2

is it independent suspension up front cv axles or halfshafts is how you tell i cant remeber on the 98 without looking it up but the best way is to get the chiltons so you have your torque spets to reinstall its not to dificult to do eather way but are you trying to replace the stearing nuckle or the wheel bearings? it eather has cv axles that go through a sealed one piece wheal bearings or it has a splined axle with u joints that go through a bearing hub on the rotertif thats the case the spindle has 6 nuts take them off you can get the special tool a sliding hammer to take it off i just use a dead blow if all else fails wont damage it make sure you check the inner neadle bearing for play. grease bolt back up torque down pack your bearings put in the new bearing seal. now you torqu the berings down with the nut to seat the bearings go back 1/4 of a tern you want 8 to 10 thousanhts of preload you can use a dial indicator to check yourself,set the locking washer and set the locking nut to torque remember when you do that your going to loose some of your preload about 1 to 2 thousenths

Jul 22, 2012 | Ford Explorer Cars & Trucks

1 Answer

When driving there is a humming kind of sound that comes from the back, it sounds like rubbing against something.

Your most likely suspects could be;
1)Your gear box (rear axle)
2)Rear wheal bearings
3)Universal Joints
Based on what you described I'm leaning towards u-joints

May 28, 2011 | 2003 Jaguar X-Type

1 Answer

Need to know the torque setting for the rear weel bearing on my 2001 ford focus. it takes a 30mm socket.

The torque setting 49 ft. lbs.

Torque Specifications
Description Nm lb-ft lb-in Wheel nuts - steel/alloy wheels 128 94 - Wheel spindle retaining nuts 66 49 - Wheel cylinder retaining bolts 12 9 - Rear brake pipe to wheel cylinder union 8 - 71 Rear wheel speed sensor retaining bolt 9 - 80 e0001241.jpg
Item Part Number Description 1 - Tie bar and knuckle 2 - Backing plate 3 - Wheel spindle 4 - Sensor ring - anti-lock control 5 - Grease cap 6 - Wheel bearing retainer 7 - Drum

Apr 26, 2011 | Ford Focus Cars & Trucks

2 Answers

What would make the rear tire tilt out

with being a front wheel drive about all it can be is wheel seal , bearing or axle bent.

Mar 22, 2011 | 1994 Ford Taurus

1 Answer

What torque for rear wheel bearing Ford Focus 2000

Can only find out that the hub needs to be tightened to
235 nm Dunno if this helps

Jan 26, 2009 | 2000 Ford Focus

2 Answers

Audi a4 tdi 51 plate

ring the main dealer and ask for torque setting they should tell u

Oct 17, 2008 | 2001 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides