Question about Cars & Trucks
The srs light is on in my clk 320 and when i try to check the diagnostic code the port is not communicating with the diagnostic tool it says no power at port
You can check if the diagnostic tool is connect well ,and if there is something wrong with the port .
Posted on Feb 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: CLK 320, the SRS light come on
Hi, There is a connector on the bottom side of the seat belt buckle. remove the rear seat bottom and check to see if the connector is damaged or just disconnected. The srs light has to be cleared using a scan tool.
Posted on Apr 06, 2009
SOURCE: mercedes clk 320 will not start
i have a 2000 clk320. it would not start sometimes, the engine would crank but it wont start. but after an hour or so it would start. sometime i'll get somewhere park, and come out an hour later and the engine would not start. if your having the same problem, take it to autoparts store ex: autozone or kragen. they could check your battery for free. and if its not the battery. than it could either be your fuel pump. or the crank position sensor. good luck. hopefully this help.
Posted on Jul 18, 2009
check the out put from the computer to the obd ll port if good need to check the wiring harness ,connections and pin contacts from computer to obd ll port connections possible short,frayed or broken wire
Posted on Feb 14, 2010
hi, unfortunately this is one of them how longs a piece of string things, you could purchase a code reader reset the error code but, what you have to think of is what caused it to do it in the first place, accelerating to hard should not cause an error ( i do it all the time in my car lol ) but it might be related to the 02 sensor getting to much unburnt fuel passing it which would cause the engine light to come on, though if the car is running as normal i doubt that will be the issue, i would myself on a car like that take it to the main dealer and get them to check it out, as buying an inexpensive code reader might not cut the mustard with this one, and parts being as dear as they are for merc's i would play on the safe side, spend a few bucks to save a load...sorry not much help
Posted on Mar 25, 2010
Tips for a great answer:
Jan 14, 2016 | Cars & Trucks
Mar 29, 2013 | 2005 Mercedes-Benz CLK 320
Dec 27, 2010 | 2003 Mercedes-Benz CLK-Class
Dec 07, 2010 | 2003 Mercedes-Benz CLK-Class
Jan 03, 2010 | 2002 Mercedes-Benz CLK-Class
Sep 17, 2009 | 1999 Mercedes-Benz CLK
Dec 15, 2008 | 2000 Mercedes-Benz CLK
212 people viewed this question
Usually answered in minutes!