Question about 2007 Ford Escape
Dash lights up on open door picture when driving i check doors and the light still on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: door ajar alarm
The doorlach pin is faulty.
On newer vehicles it is inside the door on the locking mechanism.
It is stuck in the closed position, or has become dislodged.
Refer to your mechanic for repair.
Posted on Jan 12, 2009
the wire on the door latch make sure they are plugged in or unplug it and the light should go out if it does not then it's not that door
Posted on Feb 16, 2009
I had this problem on my 2003 explorer and took WD40 and gave the lock mechanism a good dose where it meets the clasp on the door jam. Then open and close the doors a couple of times to get them working. They get gummed up and sometimes have a tendency to stick.
Posted on Feb 18, 2009
If I am not mistaken, the plunger is located in the door with the latch. Most of the time you can just pull the door panel off and adjust the switch. After opening and closing the door, they get knocked out of adjustment. I sincerely hope that this helped you. Take care and best wishes.
Posted on Mar 20, 2009
Take some WD40 and open the doors and spray a liberal amount into each of the door latches. Then open and close the doors firmly several times. This will work most of the time to unstick the ajar switches.
Posted on May 24, 2009
Tips for a great answer:
Sep 29, 2016 | 2006 Ford Escape
Jan 27, 2016 | 2003 Ford Ranger Regular Cab
Jul 26, 2014 | 2005 Ford Escape XLS
Nov 03, 2013 | Ford Escape Cars & Trucks
Mar 28, 2017 | 2010 Ford Escape
Apr 02, 2010 | 2003 Ford Taurus
Dec 19, 2009 | 2003 Ford Escape
Oct 14, 2009 | 2002 Ford Escape
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: