Question about 2007 Cadillac SRX

Open Question

Calibrate SRX power liftgate?

Replaced the gas struts in my power liftgate. Now, when it closes, it won't quite close, then it opens back up. It can only be closed manually. How do I calibrate the power closing mechanism on the liftgate?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MrScary66613
  • 1990 Answers

SOURCE: trunk won't close

You should be able to Close that Manually. Just wait for the Electronic Close to Stop Trying before you close it and it should be just fine.

Posted on Jan 23, 2009

  • 11 Answers

SOURCE: opened sunroof will not close

does it attempt to close at all?

Posted on Jun 06, 2009

  • 3 Answers

SOURCE: 08 SRX Ultraview Sunroof hard to close

Try spraying silicone lubricant in the groove that the rear brackets slide in (from the mid section of the roof to the rear).

Posted on Nov 29, 2009

ftw1952
  • 10319 Answers

SOURCE: Trunk Latch will not pull closed.

The small switch is the trunk by the pull down motor with the flap that depresses down is at fault. That is what you call the truck pull down switch. You can take this part and show it to a Cadillac or Ford parts department sales person and get a replacement for you car. Ford uses the same part for their Lincolns and Crown Vic's. The part is made by the very same supplier for Ford & GM. Ford will sell this part at a much lower cost as well compared to GM

Posted on Apr 03, 2010

Testimonial: "This is correct! "

bluebirdmate
  • 1190 Answers

SOURCE: the sunroof wont close automatically- when the

That has NEVER been an option on any cadillac since 1965 fo sure. If it was then it was some off the wall aftermarket item. If so then they need to fix it

Posted on Aug 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 Lincoln Navigator liftgate opens okay but need help to close why?


Power Liftgate
The power liftgate feature will allow the customer to automatically OPEN or CLOSE the liftgate by activating the interior open/close switch, the remote keyless entry transmitter or by manually initiating liftgate movement. The power liftgate uses a power cinch system to latch the liftgate.
The power liftgate system consists of the following:
  • Power liftgate control switch (located in the overhead console)
  • Power liftgate motors (located in the rear headliner area)
  • Optical sensor and power liftgate encoder wheel (located in the left power liftgate motor assembly)
  • Pinch strip switches (located on the body by the liftgate)
  • Home position switch (located on the cinch actuator)
  • Forkbolt switch (located on the cinching latch assembly)
  • Detent switch (located on the cinching latch assembly)
  • Liftgate close chime module (located in a unit external from the power liftgate module)
  • There are a lot of electrical switches an motors
  • Visual Inspection Chart Mechanical Electrical
    • Power liftgate motors
    • Power cinching latch and linkage
    • Power liftgate pinch strip switches
    • Liftgate and liftgate hinges
    • Liftgate assist cylinders
    • Liftgate strikers
    • Exterior release handle and linkage
    • Liftgate weatherstrip
    • Liftgate alignment to body and striker
    • Central junction box (CJB) fuse:
      • 5 (7.5A)
      • 105 (30A)
    • Power liftgate control switch
    • Wiring harness
    • Connectors
    Are you willing to take the back hatch apart to test this ,to find a fix . But first have it check for DTC'S - diagnostic troulbe codes '
  • Power Liftgate Module Diagnostic Trouble Code (DTC) Index
    Power Liftgate Module Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1342 ECU Is Defective Power Liftgate Module INSTALL a new power liftgate module. REFER to Power Liftgate Module in this section. B2477 Module Configuration Failure Power Liftgate Module REFER to Section 418-01 . B2522 Vbatt1 Circuit Failure Power Liftgate Module Go To Pinpoint Test B . B2552 Vbatt2 Circuit Open Power Liftgate Module Go To Pinpoint Test B . B2698 Vbatt2 Circuit Failure Power Liftgate Module Go To Pinpoint Test B . B2699 Left Pinch Strip Open or Short to Battery Power Liftgate Module Go To Pinpoint Test B . B2700 Right Pinch Strip Open or Short to Battery Power Liftgate Module Go To Pinpoint Test B . B2701 Left Pinch Strip Stuck Active Power Liftgate Module Go To Pinpoint Test B . B2702 Right Pinch Strip Stuck Active Power Liftgate Module Go To Pinpoint Test B . B2703 Open/Close Switch Stuck Active Power Liftgate Module Go To Pinpoint Test B . B2704 Optical Sensor Power Short to Ground Power Liftgate Module Go To Pinpoint Test B . B2705 Optical Sensor 1 Input Not Active During Powered Gate Movement Power Liftgate Module Go To Pinpoint Test B . B2706 Optical Sensor 2 Input Not Active During Powered Gate Movement Power Liftgate Module Go To Pinpoint Test B . B2709 Gate Open Output Short to Battery Power Liftgate Module Go To Pinpoint Test B . B2710 Gate Close Output Short to Battery Power Liftgate Module Go To Pinpoint Test B . B2711 Gate Open Output Short to Ground or Open Power Liftgate Module Go To Pinpoint Test B . B2712 Gate Close Output Short to Ground or Open Power Liftgate Module Go To Pinpoint Test B . B2713 Unlatch Output Short to Ground or Open Power Liftgate Module Go To Pinpoint Test B . B2714 Uncinch Output Short to Ground or Open Power Liftgate Module Go To Pinpoint Test B . B2715 Cinch Output Short to Ground or Open Power Liftgate Module Go To Pinpoint Test B . B2718 Gate Ajar Output Short to Battery Power Liftgate Module Go To Pinpoint Test B . B2721 Gate Ajar Output Short to Ground or Open Power Liftgate Module Go To Pinpoint Test B . B2722 Open/Close Switch Active During Self-Test Power Liftgate Module Go To Pinpoint Test B . B2723 Glass Position Switch Active During Self-Test Power Liftgate Module Go To Pinpoint Test B . B2724 Forkbolt Switch Invalid During Self-Test Power Liftgate Module Go To Pinpoint Test B . B2725 Detent Switch Invalid During Self-Test Power Liftgate Module Go To Pinpoint Test B . B2726 Home Switch Invalid During Self-Test Power Liftgate Module Go To Pinpoint Test B . B2819 Gate Motor Circuit Short to Battery Power Liftgate Module Go To Pinpoint Test B . B2820 Gate Motor Circuit Short to Ground or Open Power Liftgate Module Go To Pinpoint Test B . B2821 Cincher Motor/Unlatch Actuator Short to Ground or Open Power Liftgate Module Go To Pinpoint Test B . B2822 Cincher Motor/Unlatch Actuator Short to Battery Power Liftgate Module Go To Pinpoint Test B . B2825 Movement Ceased Due to Excess Speed Deviation Power Liftgate Module Go To Pinpoint Test B . B2903 Chime Output Circuit Short to Battery Power Liftgate Module/ Liftgate Chime Module Go To Pinpoint Test C . C1935 Chime Circuit Failure Power Liftgate Module/ Liftgate Chime Module Go To Pinpoint Test C . U1950 UBP Communication BUS Fault UBP Communi- cation REFER to Section 418-00 . U2338 Invalid ACM Message Data Power Liftgate Module REFER to Section 418-00 . U2242 Invalid 4WAS Message Data 4WAS Module REFER to Section 308-07A . U2403 Invalid CSM Message Data Vehicle Security Module REFER to Section 418-00 . U2406 Invalid IC Message Data Instrument Cluster Module REFER to Section 413-01 . U2469 Power Liftgate Disabled By Customer Interface Instrument Cluster Module Turn power liftgate on at message center. U2470 Unexpected Keyfob/Keypad Button Press Power Liftgate Module Go To Pinpoint Test A . U2471 Unexpected PRNDL State Power Liftgate Module REFER to Section 419-10 . U2472 Unexpected IGN State Power Liftgate Module REFER to Section 418-00 . U2473 Unexpected Vehicle Speed Instrument Cluster Module/ Powertrain Control Module REFER to Section 413-01 . U2528 PRNDL Data Mismatch Power Liftgate Module/ Instrument Cluster Module Go To Pinpoint Test D .

Feb 13, 2017 | 2006 Lincoln Navigator 4x4

1 Answer

Very cold outside, we used the hatchback all day; but now we can't get it to close. We did try using the button in the glove box - still won't close


How to Use the Power Liftgate on 2013 Toyota RAV4

www.autoevolution.com/.../how-to-use-the-power-liftgate-on-2013-toyo...
Nov 13, 2013 - First, there is no more spare tire attached to the rear door and second...... How to Use the Power Liftgate on 2013 Toyota RAV4 ... angle, press one of the two buttons again; Press and hold one of the buttons to close the hatch.

2013 Toyota Rav4 Power liftgate not working when pressing ...

? 0:46
https://www.youtube.com/watch?v=X-VjbRatwY4
Apr 28, 2014 - Uploaded by Adam Bednarz
2013 Toyota Rav4 Power liftgate not working or opening by itself when ... operation and you then have to manually open and close the door. .... Got the car back from the 30K service and the back hatch was not working.

How do I operate my 2013 RAV4 adjustable power liftgate?

toyota.custhelp.com/.../detail/.../how-do-i-operate-my-2013-rav4-adjusta...
The adjustable power liftgate can be opened and closed using either a switch on the ...

Jan 11, 2016 | 2013 Toyota RAV4

1 Answer

2008 Cadillac srx power tailgate opens fine, but won't close with the remote. I can't hear the motor. The auto close button doesn't work either. Is there a fuse or relay? If so where is it?


An electronic control module controls it .
The liftgate module (LGM) controls operation of the liftgate latch motor and the liftgate actuator assembly. Do you have a Liftgate Ajar Indicator ON ? Or a message in the message center driver information center (DIC) illuminates the LIFT GATE AJAR indicator ? The liftgate control module could have a DTC - diagnostic trouble code in memory !

When open, the liftgate can be closed by either a keyless entry transmitter or the liftgate close switch. When a GMLAN serial data message or switch input is seen, the liftgate module begins the close sequence. The liftgate motor is reversed, lowering the liftgate until it latches into the liftgate latch. Once latched, the latch will cinch the liftgate to a fully closed position.
Power liftgate function will only be allowed if certain operating criteria are met. Any of the following may cause the power liftgate not to function:
?€¢ Vehicle is not in park. ?€¢ Engine cranking is present. ?€¢ Temperature limits have been exceeded. ?€¢ Liftgate motor overcurrent is detected. ?€¢ Excessive hall effect counts are seen. ?€¢ System voltage is out of range. ?€¢ A DTC is set that disables power liftgate functionality. The liftgate also receives inputs from 2 object detection sensors. If either of these sensors indicate an object is in the path of the liftgate, liftgate functions will be suspended until the object is removed.

Aug 03, 2015 | Cadillac Cars & Trucks

1 Answer

How do I reset lift gate on 2004 lincoln navigator. It doesn't open or close anymore with the remote


Maybe your key fob needs a new battery !
Power Liftgate Initialization

NOTE:If the power liftgate system is turned OFF in the message center, the system cannot be activated with any switches or with the liftgate handle. The system will need to be turned ON for any power operation to occur.

NOTE:The power liftgate may not operate under the following conditions:

  • a low voltage or dead battery.
  • a disconnected battery
  • a power liftgate that has been left open for more than six hours.
  • a power liftgate that has been manually closed and left ajar.
If any of these conditions has occurred, the power liftgate must be reset.
  1. Manually close and fully latch the power liftgate.
  1. NOTE:If the power liftgate does not open during this step, refer to the symptom chart to diagnose the power liftgate for no operation.
    Power open the power liftgate by using the keyfob or overhead console switch.
  1. Once the power liftgate is fully open, close the power liftgate by using the keyfob or overhead console switch.
    This system can also set DTC'S
  2. POWER LIFTGATE MODULE DIAGNOSTIC TROUBLE CODE (DTC) INDEX (BODY CLOSURES) 501-03 Body Closures 2004 Expedition/Navigator DIAGNOSIS AND TESTING Procedure revision date: 08/23/2004

    Power Liftgate Module Diagnostic Trouble Code (DTC) Index

    Power Liftgate Module Diagnostic Trouble Code (DTC) Index

    DTC Description Source Action B1342 ECU Is Defective Power Liftgate Module INSTALL a new power liftgate module. REFER to Power Liftgate Modulein this section. B2477 Module Configuration Failure Power Liftgate Module REFER to Section 418-01. B2522 Vbatt1 Circuit Failure Power Liftgate Module GO to Pinpoint Test B. B2552 Vbatt2 Circuit Open Power Liftgate Module GO to Pinpoint Test B. B2698 Vbatt2 Circuit Failure Power Liftgate Module GO to Pinpoint Test B. B2699 Left Pinch Strip Open Or Short To Battery Power Liftgate Module GO to Pinpoint Test B. B2700 Right Pinch Strip Open Or Short To Battery Power Liftgate Module GO to Pinpoint Test B. B2701 Left Pinch Strip Stuck Active Power Liftgate Module GO to Pinpoint Test B. B2702 Right Pinch Strip Stuck Active Power Liftgate Module GO to Pinpoint Test B. B2703 Open/Close Switch Stuck Active Power Liftgate Module GO to Pinpoint Test B. B2704 Optical Sensor Power Short To Ground Power Liftgate Module GO to Pinpoint Test B. B2705 Optical Sensor 1 Input Not Active During Powered Gate Movement Power Liftgate Module GO to Pinpoint Test B. B2706 Optical Sensor 2 Input Not Active During Powered Gate Movement Power Liftgate Module GO to Pinpoint Test B. B2709 Gate Open Output Short To Battery Power Liftgate Module GO to Pinpoint Test B. B2710 Gate Close Output Short To Battery Power Liftgate Module GO to Pinpoint Test B. B2711 Gate Open Output Short To Ground Or Open Power Liftgate Module GO to Pinpoint Test B. B2712 Gate Close Output Short To Ground Or Open Power Liftgate Module GO to Pinpoint Test B. B2713 Unlatch Output Short To Ground Or Open Power Liftgate Module GO to Pinpoint Test B. B2714 Uncinch Output Short To Ground Or Open Power Liftgate Module GO to Pinpoint Test B. B2715 Cinch Output Short To Ground Or Open Power Liftgate Module GO to Pinpoint Test B. B2718 Gate Ajar Output Short To Battery Power Liftgate Module GO to Pinpoint Test B. B2721 Gate Ajar Output Short To Ground Or Open Power Liftgate Module GO to Pinpoint Test B. B2722 Open/Close Switch Active During Self-Test Power Liftgate Module GO to Pinpoint Test B. B2723 Glass Position Switch Active During Self-Test Power Liftgate Module GO to Pinpoint Test B. B2724 Forkbolt Switch Invalid During Self-Test Power Liftgate Module GO to Pinpoint Test B. B2725 Detent Switch Invalid During Self-Test Power Liftgate Module GO to Pinpoint Test B. B2726 Home Switch Invalid During Self-Test Power Liftgate Module GO to Pinpoint Test B. B2819 Gate Motor Circuit Short To Battery Power Liftgate Module GO to Pinpoint Test B. B2820 Gate Motor Circuit Short To Ground Or Open Power Liftgate Module GO to Pinpoint Test B. B2821 Cincher Motor/Unlatch Actuator Short To Ground Or Open Power Liftgate Module GO to Pinpoint Test B. B2822 Cincher Motor/Unlatch Actuator Short To Battery Power Liftgate Module GO to Pinpoint Test B. B2825 Movement Ceased Due To Excess Speed Deviation Power Liftgate Module GO to Pinpoint Test B. B2903 Chime Output Circuit Short To Battery Power Liftgate Module/ Liftgate Chime Module GO to Pinpoint Test C. C1935 Chime Circuit Failure Power Liftgate Module/ Liftgate Chime Module GO to Pinpoint Test C. U1950 UBP Communication BUS Fault UBP Communi cation REFER to Section 418-00. U2338 Invalid ACM Message Data Power Liftgate Module

Feb 05, 2015 | Lincoln Cars & Trucks

1 Answer

What are the common problems when a 2001 Lincoln navigator lifegate won't open


Do you have power lift gate ?
The power liftgate may not operate under the following conditions:
  • a low voltage or dead battery.
  • a disconnected battery.
  • a power liftgate that has been left open for more than six hours.
  • a power liftgate that has been manually closed and left ajar.
If any of these conditions has occurred, the power liftgate must be reset before performing any pinpoint tests. For additional information, refer to
Power Liftgate Initialization NOTE: If the power liftgate system is turned OFF in the message center, the system cannot be activated with any switches or with the liftgate handle. The system will need to be turned ON for any power operation to occur.
NOTE: The power liftgate may not operate under the following conditions:
  • a low voltage or dead battery.
  • a disconnected battery
  • a power liftgate that has been left open for more than six hours.
  • a power liftgate that has been manually closed and left ajar.
If any of these conditions has occurred, the power liftgate must be reset.
  1. Manually close and fully latch the power liftgate.
  1. NOTE: If the power liftgate does not open during this step, refer to the symptom chart to diagnose the power liftgate for no operation.
    Power open the power liftgate by using the keyfob or overhead console switch.
  1. Once the power liftgate is fully open, close the power liftgate by using the keyfob or overhead console switch

Jan 16, 2015 | Lincoln Cars & Trucks

2 Answers

The liftgate is open then immediately close


Do you have auto opening liftgate if so might require reprogramming,you may require dealarship help on that, if not the gas struts may have failed which is poss coincidental. Good luck

Nov 29, 2014 | 2005 Ford Freestar

1 Answer

I have a chevy traverse 2009. The power tailgate wont stay up on the strut. it was working fine the day before. the gate opens to the fully open position before slipping resulting in the gate closing


It's now a recall item. See below.


NHTSA CAMPAIGN ID Number: 15V415000
Component: STRUCTURE:BODY:HATCHBACK/LIFTGATE
Manufacturer: General Motors LLC
Potential Number of Units Affected: 686287

Year: 2009
Make: Chevrolet
Model: Traverse
Manufactured
from: 2008-07-06
to: 2012-02-29
Recall Date: 2015-06-30
-->
Summary:

General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to February 29, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall.

If the open liftgate unexpectedly falls, it may strike a person, increasing their risk of injury.

GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. Owners were mailed interim notices on August 3, 2015. Owners will receive a second notice when remedy parts become available. Owners may contact Buick customer service at 1-800-521-7300, Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Saturn customer service at 1-800-553-6000. GM's number for this recall is 15240.

Jan 01, 2013 | 2009 Chevrolet Traverse

2 Answers

I have a 2007 Suburban, and the lift gate opens up about 1/4 the way and then drops to the closed position. This happens regardless of how it's opened.


{: ) Your liftgate struts (shocks) could have gone weak. If it's a power liftgate, press the off button to disable the power liftgate function, so that you can open the liftgate manually. With a little help from you, extend the liftgate at full open position and check if it will hold itself up there as it normally should. If it starts to fall off as you catch it, that means the liftgate struts don't have enough pressure anymore to push and sustain the weight of the liftgate. Check for signs of leak on the struts, or better if you can replace it both.

Aug 02, 2011 | 2007 Chevrolet Suburban Three-Quarter-Ton...

1 Answer

I have a 07 Chevy tahoe..the rear door opens halfway than closes??


{: ) Try to disable the power lift system , there is an on/off switch located at the center console or overhead console. Then try to open it manually and see if it will hold at full open. If it falls back, then you have a weak liftgate strut, and you will need to replace both.
Or if you can't disable it for some reason, you can give it extra help while on its powerlift up but dont force too much. If it goes up successfully when you applied little help, remove your hand and check if it goes down. But if you feel that the liftgate wants to return back while halfway, remove your hand and let it be.
Was there a time when your liftgate is open, then starts to close and then reopens again at 1/3 on the way? The cause of this may be a sharp sheet metal edge inside the inner roof panel chafing the liftgate harness. And if you got B153 codes just in case, you may do some wiring checks and remove the panels at the rear roof area and look for that gray connector with 22 pins located under the center of the rear headliner panel.

Jun 13, 2011 | 2007 Chevrolet Tahoe

1 Answer

My rear lift gate on 07 tahoe opens and closes its self weather the key is in the ignition or not, opens 1/2 way closes 3/4 then all the way up and all the way down, sometimes it sets off the car alarm- it...


Operation
A power open or close cycle can only be initiated from the fully closed or open positions while the vehicle is in park and the liftglass ajar switch input to the liftgate module is inactive. At any time during a power open or close cycle the operation can be reversed by pressing any of the open/close switches. The power liftgate can be switched to manual mode with the on/off switch in the overhead console and during manual operation the power latch will still operate. During power liftgate operation the liftgate module continuously monitors the liftgate position and load profile. The position is calculated from hall effect sensor counts and the electrical load of the gear motor is used to determine physical resistance to the liftgate. Both of these profiles must be learned before the liftgate can operate properly and relearned any time most liftgate components are serviced.


Object Obstruction Detection
The liftgate control module continuously monitors power liftgate operation and calculates its location and direction of travel using 2 hall effect sensors that are part of the gear motor assembly. The hall effect sensors are 3 wire sensors and are supplied with a 5 volt power circuit, ground and signal circuits from the liftgate control module. The hall effect sensor signal circuits are referenced from battery voltage within the liftgate control module and pulsed low by the hall effect sensors.
The power liftgate system uses a secondary object detection method which consists of object sensors fixed to both sides of the liftgate near the seal area. The object sensors consist of an internal fixed resistor and normally open switch contacts which when closed will bypass the resistor. The signal circuit is supplied 5 volts through a resistor and monitored within the liftgate control module, and during normal power liftgate operation the signal circuit should remain a fixed value. When an object presses one of the sensors the contacts close and the resistor is bypassed causing the signal circuit voltage at the module to go low.

Gear Motor Assembly
The liftgate motor is a bi-directional motor and open or close operation is the result of the direction of the motor rotation. The liftgate module controls the liftgate motor through the control circuits by suppling power and ground in the appropriate polarity. The motor control circuits are monitored by the liftgate module prior to activation for a high or low condition and during motor operation for any irregular current flow conditions.
The liftgate motor clutch engages or disengages the liftgate motor to the liftgate drive gear and is the component that determines power or manual operation. When the liftgate module supplies power to the clutch control circuit the clutch coil is energized and the liftgate motor is engaged to the liftgate drive gear so that power operation can occur. The liftgate module monitors the clutch control circuit at all times for a short high while in an inactive state or a short low or insufficient current flow while in an active state.
The full open switch is part of the gear motor assembly and will close and become active when the liftgate reaches the full open position. The full open switch signal circuit is supplied battery voltage through a resistor and monitored within the liftgate module. The liftgate provides a low reference circuit and when the switch contacts close the signal circuit goes low and the liftgate module determines the switch to be active.

DTC B153A 00: Liftgate Latch Switch Signal Circuit
DTC B153A 08: Liftgate Latch Switch Signal Circuit Signal Invalid

When calibrating the liftgate position, the liftgate module (LGM) is placed in a functional state to learn the liftgate travel limits. DTC B1019 00 will set automatically as an indicator that the system is in learn mode and not as a fault indicator. Once the travel limits are learned by the liftgate module, the LGM will exit calibration mode. If the LGM does not exit learn mode, DTC B1019 00 will remain current and indicate a fault.
DTC B153B 02: Liftgate Open Switch Signal Circuit Short to Ground
DTC B153B 05: Liftgate Open Switch Signal Circuit Short to Short to Battery or Open
DTC B153E 02: Liftgate Position Sensor Signal Circuit Short to Ground
DTC B153E 05: Liftgate Position Sensor Signal Circuit Short to Battery or Open
DTC B153E 08: Liftgate Position Sensor Signal Circuit Signal Invalid

Your best bet , take it to the dealer .

Aug 08, 2017 | Chevrolet Tahoe Cars & Trucks

Not finding what you are looking for?
2007 Cadillac SRX Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...