Question about 1993 Mercury Sable

1 Answer

I want to add automatic transmisson fluid to my 1993 mercury sable... but can't figure out where to put it?

I've checked the fluid level & it need fluid added but I can't find where I put it in????

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 2,475 Answers

Alright.
It's time to buy an automatic transmission funnel, or get really creative!An automatic transmission funnell is about 2 feet long or more, has a regular funnel with a really long neck.
The hose and neck are small.
You put the fluid in the tube that holds the dipstick with your special funnel.
Creative means you make your own funnel with a regular funnel and some small plastic or rubber tubing.
Be blessed.

Posted on Jan 23, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 958 Answers

SOURCE: Where is the starter located on a 1993 mercury sable engine

trace the big cable that came from the positive terminal of your battery. at it's end is the starter.

or if it passes trough a big relay, then there is another big cable from that relay that would go down to the side of the engine, either left or right, that would be the starter.

tnx 4 using fixya,

drcool

Posted on Oct 04, 2008

  • 73 Answers

SOURCE: I have a 2001 mercury

yes you add yout fluid through your dip stick. go to your auto parts store and get the auto trans fluid for fords, yes there are several different types, ford and chevy use two different types. just ask for the trans fluid for a ford auto trans

Posted on Feb 06, 2009

chuck943
  • 783 Answers

SOURCE: How do I check the clutch fluid to a 1999 Mercury Cougar 4cyl

The brake master cylinder reservoir has a separate chamber and is used to supply the hydraulic clutch system. So make sure master cylinder reservoir is full.

http://i253.photobucket.com/albums/hh43/chuck943/M1601026.jpg

Here is a pic of the system.
1. Brake master cylinder reservoir
2.Clutch master cylinder
3.Clutch slave cylinder with integrated release bearing

Posted on Mar 23, 2009

matney68
  • 426 Answers

SOURCE: i need to change the serpentine belt for a 1993

I have 2 of the v-6 diagrams. the first is the 3.0 the second is the 3.8 but not SHObfd8b15.gifd1dbd38.gif

Posted on Nov 12, 2009

  • 137 Answers

SOURCE: how to put serpentine belt on Mercury Sable

its easy just follow the diagram and find the tension pulley and adjust it just enouf to get the belt on then release. for futher help please call 419 689 1114

Posted on Apr 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change fluid in power steering system


You raise the front of the car & support it if necessary,
to put a bottle under it,such as an old washer fluid bottle

Then remove the steering pump return hose from the fluid
container

Put that hose into some plastic tubing & into the empty bottle

Remove the injector fuses, so the motor gets no fuel

Crank the motor & the old fluid goes into the bottle


Add new fluid Dex/Merc or Mercon V to make sure the
container has fluid as you flush out the old

When done,return the return hose,clean up & start the motor
Turn wheels lock to lock a couple times,put it on the ground
& check the fluid level

Change trans & power steering every 3 years or they will
fail for sure.

Those two fluids will not remove heat after 2 or 3 years
in service.

Jul 15, 2014 | 1999 Mercury Sable

1 Answer

How do I put transmission fluid into my 1993 Mercury Grand Marquis?


Look towards the back of the engine at the passenger side and you will see a handle probably marked transmission. It will protrude from a small diameter tube. When you lift this handle there will be a thin metal piece that is the dipstick used to check the fluid level. Before you check the fluid let you car warm up to normal operating temperature and run the selector through the gear positions. Make sure your car is on a level surface and insert the dipstick back into the tube fully and pull it back out and read the fluid level at the tip of the stick. The car must be warmed up to get the correct fluid level.Transmission fluid expands as it heats up. It will show low if you check it when it is cold. If you add fluid when it is cold this will result in an overfill condition when it warms up and will cause foaming and possible transmission damage.

Apr 06, 2012 | 1993 Mercury Grand Marquis

1 Answer

Trying to add transmission fluid to my car cannot locate where to put it.


if you have checked the transmission fluid then you add the fluid where the dipstick is by removing the dipstick and adding oil to the tube and then check the level.it should be between the full and add mark as when the car gets to operating temperature it will rise.

Sep 08, 2011 | 1993 Mercury Sable

1 Answer

My 1993 Honda accord EX , the transmission quit. auto, no gears forward or reverse.


Check the fluid level. Automatic transmissions won't go into gear without enough fluid. If it's low, you've probably got a leak somewhere that you need to find.

Jun 13, 2011 | 1993 Honda Accord

2 Answers

How much tranamission fluid does my 1997 sable hold


If you have your owners manual, there is a section containing the capacities for all fluids. You may also simply check your fluid level, with a running motor and warm transmission. If the stick indicates add, start with a 1/4 quart and work your way up. Unless there is a problem with the trans, there is no real reason to ever add fluid unless your are flushing the transmission.

Feb 02, 2011 | 1997 Mercury Sable

1 Answer

Where does the transmission fluid go in my 2002 mercury sable automatic


Do you know where the dipstick for the transmission is? I assume you do if you know you need to add it. That is where the fluid goes. Stick a small funnel in the hole after taking dipstick out and pour the fluid. Remember don't overfill. Transmission fluid gets bigger when heated so always check when transmission is warm. Hope I could be of some help.

Jan 23, 2011 | 2002 Mercury Sable

1 Answer

When i put the car into gear it is stuck in idle and when i rev the rpm's up to 3 then it kicks in and goes. Everytime i stop i have to do this.


the trans is slipping. check the level. with the engine hot, remove the dipstick and wipe clean. it will be located where the engine and trans meet. make sure it's not the oil dipstick. insert the stick and remove. the level should be between the lines or holes. if the fluid level is between those marks, don't add any. the type of fluid is printed on the dipstick. if the level is low add enough to the full mark only. add small quantities. 1/2 qt at a time. then check the level. if the level is good, have the trans fluid and filter changed. if that desn't work, there are mechanical problems.

Jun 06, 2010 | 1994 Mercury Sable

2 Answers

My 2002 Mercury Sable will not shift into gear, will shift out of park, but will not go into any gear.


How many miles and how does your transmission fluid look?

Get car ot normal oper. temps and put on level ground. Put trans thru all gears with foot on brake. Put into park, leave running and check level. If level is low, this could be part or all of your problem. If level is fine and trans fluid is not brown or burnt, you have an electronic problem.

If fluid checks ok, let me know if you have a Check engine light on, ABS light, etc.

Hope that helps.

Sep 12, 2009 | 2002 Mercury Sable

2 Answers

1999 Mercury Sable 55,000 miles ....will not move .


Since the fluid level is okay, I think your gonna need a rebuilt transmission. Tow it to a good transmission shop.

Sep 10, 2009 | 1999 Mercury Sable

1 Answer

Brake Fluid ??


DOT 3 fluid is the correct one

Oct 30, 2008 | 1992 Mercury Sable

Not finding what you are looking for?
1993 Mercury Sable Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...