Question about 1996 Mazda Protege

1 Answer

1996 Mazda 323F w/ 1.6 dohc eng. Eng will not start. No fuel pressure. Fuel pump OK. Full pressure with jumper at diagnostic link. Where is the fuel opening relay?

Posted by on

  • Kirby Vitalis Jan 23, 2013

    The Main relay is in the box next to the battery which is in the fuel pump circuit. There is also another relay called a fuel opening relay and it supposed to be located in the kick panel on the passenger side. There are 3 relays there. One is labellled door lock, and the other 2 (1 average size and the other a smaller one). Which is the fuel opening relay>

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 21,873 Answers

The pump relay should be in the box near the battery.

Posted on Jan 23, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
stormbrewin
  • 426 Answers

SOURCE: 1996 mazda mx6 ls cranks but won't start

you may need to run a wire from a keyed ignition source that has power while cranking and running to the fuel pump relay and bypass the pcm to test wether it will run, if it runs put a more permanent wire in place.Not too sure what tests youve done but it seems that fuel is what your focusing on so a quick test is too spray engine start up the intake tube to see if the engine trys to run if it does it eliminates a lot of other potential reasons for a no start condition.Also try squeezing the fuel return line to see if the added pressure will try to make engine run.Could be time to replace fuel pump etc anyway let me know how it goes good luck with it

Posted on Dec 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the valve clearance for my Diahatsu Mira 1998 850cc?


Mira 847 cc 1993- Engine Code ED 10
Ignition data
  • Ignition system type: El-ecu
  • Ignition coil make/type: Dia/-
  • Supply voltage: 12 + Volts with ballast resistor
  • Primary resistance: 1.35-1.65 Ohms
  • Secondary resistance: 22000-30000 Ohms
  • Distributor make/type: Den/-
  • Contact breaker gap/air: 0.2-0.4 mm
  • Dwell angle: Deg\par Ignition Timing - unleaded: 5 2/900 Deg eng/rpm (without vacuum)
  • Ignition Timing - leaded: Deg eng/rpm (without vacuum)
  • Timing mark location: Flywheel
  • No 1 plug location: Pulley
  • Firing Order: 1-2-3
  • Spark plug make: Bosch
  • Spark plug type: WR6DC
  • Electrode gap: 0.7-0.8 mm
Fuel System
  • Fuel type: U/L
  • Fuel pump type/pressure: bar
  • Engine idle speed: 900+100/-50 rpm
  • Fast idle speed: 2000 rpm
  • CO level at idle speed: 1.0
  • 0.5 Vol %
Engine Data
  • Valve clearance - inlet: 0.25 mm (hot)
  • Valve clearance - exhaust: 0.30 (hot)
  • Compression pressure: 1.2-1.5 bar
  • Oil pressure: 2.5-5.6/3000 bar/eng/rpm
  • Radiator pressure cap: 0.6-1.05 bar/type
  • Drive belt 1 - size: 9.5x925/KDB 925 mm/type
  • Drive belt 2 - size: mm/type
Electrical System
  • Alternator output: 10/2500 Amps/eng/rpm
  • Regulated output: 14.2-14.8 Volts
  • Battery: 12/35 V/Ah
  • Starter motor make/type: Den/-
Other data
  • Clutch operation type: Cable
  • Clutch adjustment: 10-30 mm
  • Cambelt failure: Damage
  • Cambelt Part Number: 13514-87211
  • Tyre pressures: 1.8(26)f 1.8(26)r bar (psi)
  • it took me 3 seconds to google this then i realized that this is a older engine then yours

Oct 30, 2014 | 1996 Daihatsu Mira

1 Answer

How to check out a fuel pump system on a1998 dodge dakota 3.9 eng


if the fuel pump is running then check the fuel pressure with a gage it should be around 35 lbs pressure for a multipoint injection system if its throttle body injection its around 15/18 lbs. also check fuel volume its usually around 1 pint in 15 seconds.

Aug 16, 2014 | Cars & Trucks

1 Answer

96 Jimmy 4.3 eng what is the fuel pressure , key on, not running


the vortecs are really picky about fuel pressure. if i recall right i think 60psi is the magic number

Mar 13, 2012 | 1996 GMC Jimmy

1 Answer

1996 Oldsmobile Cutlass Ciera will not start. need to know were the fuel relay is located. we thing its the fuel pump but would like to try the relay first. car ran on friday. started to check tail lights...


I would check the fuses in the fuse box first there might be a fuse for the fuel pump that's burnt out.As far as the relays it should say on the inside of the cover to the engine compartment fuse box.If you have the owners manual it should say in there also.

Feb 28, 2011 | 1996 Oldsmobile Cutlass Ciera

1 Answer

2001 Mazda MPV, 2.5L eng. During accelerating on to highway, van lost power. Van continued to operate but with little power available. I have no engine light and my code "checker" shows PASS (no...


looks like not enough fuel pressure, check the fuel filter.
and the fuel pump pressure.with car running 60 psi
the pump is located at the rear seat driver side you have to remove the carpet to access the cover. if the fuel pressure checked "OK" suspect defective maf sensor (sometimes defective maf sensor do not show errors codes)another way to test is disconecting the maf sensor and start the car (computer goes to limp in mode) and works little better,or check by scanner idle= low grams per seconds and increase when accelerate.

May 02, 2017 | 2001 Mazda MPV

1 Answer

Sputtered & died


this happened to me on my 1999 dodge ram and it ended up being the fuel pump

Apr 08, 2010 | 1996 Dodge Ram

1 Answer

Intermittent fuel starvation,high rpm at idle restart eng all ok


You should verify you have proper fuel pressure. Check with a gauge when cold and hot. Possible clogged fuel filter is not allowing enough gas to feed engine. Verify pressure at idle and also under load when driving.

Dec 06, 2009 | 1986 Ford Aerostar

1 Answer

1996 chevy k1500 w/350 eng.fuel system


Try replacing the intank plug-in for the fuel pump. They have been known to go bad even though they look okay.

Jun 24, 2009 | 1996 Chevrolet K1500

1 Answer

1996 mazda mx6 ls cranks but won't start


you may need to run a wire from a keyed ignition source that has power while cranking and running to the fuel pump relay and bypass the pcm to test wether it will run, if it runs put a more permanent wire in place.Not too sure what tests youve done but it seems that fuel is what your focusing on so a quick test is too spray engine start up the intake tube to see if the engine trys to run if it does it eliminates a lot of other potential reasons for a no start condition.Also try squeezing the fuel return line to see if the added pressure will try to make engine run.Could be time to replace fuel pump etc anyway let me know how it goes good luck with it

Dec 12, 2008 | 1996 Mazda MX-6

Not finding what you are looking for?
1996 Mazda Protege Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...