Question about 2002 Hyundai XG350

Open Question

High rev on start. no response from pedal. engine dies.

P0110 p1171 p1175 codes

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 195 Answers

SOURCE: 1998 caviler when brakes are applied engine revs up

Hello;
Yoou most likely have a vacuum leak in the line from the booster to the intake. It could be a bad booster or check valve as well.
Thanks;
Rich
RPM Northwest

Posted on Jun 04, 2009

  • 398 Answers

SOURCE: 2000 hyundai sonata.. P0300, P0110 and P0102 codes..

Higher octane gas 93 with some good octane boost in the black can at autozone cost about 7 dollars or a bottle of 104 octane boost. Change the fuel filter. Probably only one coil pack is bad. The OBDII reader should tell you which one was a misfire.

Posted on Jul 15, 2009

ghost45
  • 1280 Answers

SOURCE: The engine will start and idle fine. Engine revs

Definitely an electrical problem. Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Posted on Oct 04, 2009

  • 137 Answers

SOURCE: 2000 hyundai sonata

Check under hood for a vacuum hose off,broken, cracked or loose at a connector.

Posted on Mar 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi.My name is Alvin.I have a Nissan micra with error code p1171.When my is on lower gears or rev is under 1500,it switches off.


P1171 is not a nissan specific OBD2 code. are you certain that is the code you have recieved?

Sep 25, 2014 | Cars & Trucks

1 Answer

My 96 honda civic rough starts dies when put in gear


Do the throttle body cleaning and re- learn idle speed control valve.

Mar 16, 2013 | 1996 Honda Civic

1 Answer

Jaguar X-Type P1175 P1171


the codes are fuel and air mixture codes...being rich or lean...seems like u have a vacuum leak somewhere........if you have the 3.0 usually its the upper breather hose...just remove the oil filler cap,then take a phillips crew driver,and remove to two spring loaded cover screws,then you will see a hose running across the top of the engine about 14 inches long feeding into the valve cover...this hose usually cracks on the belly side...but inspect it and see if its the culprit...let me know...thanks

Nov 03, 2011 | 2004 Jaguar X-Type

1 Answer

2000 Ford Windstar 3.8.....engine light is on.....have been told that the following codes show up........P1171, P1175, P0131, P0134......what does it all mean and how much would it cost to correct?.....my...


After researching the codes you posted, I could only find only the last two, are you sure that the first two are in the correct sequence? however I did find a code P1117 and P1157.

Your stored codes P 131, P0134 are in reference to your 02 sensors, this may be due to faulty sensor input, ie: coolant sensors.

You will almost likely have to use a scanner to take the readings from your vehicle.

Jun 13, 2011 | Ford Windstar Cars & Trucks

1 Answer

Check engine light on car dies when I touch brake


Check Engine light is on. Find out what DTC (diagnostic trouble code) is set and I can help you more. You can get a code puller from your local parts store.

Dec 30, 2009 | 2005 Kia Amanti

1 Answer

Starts at high rev and then dies


Hello, I would check your air flow control valve and that should be behind your throttlebody. Autozone can also check your engine codes for you for free. If you have any other questions you can email me and I hope you have good luck with this.

May 20, 2009 | 1998 Ford Explorer

1 Answer

Engine-no go


i think the dist is adjable try advanceing it some times the after market caps are a little diffront

Apr 06, 2009 | 1996 Ford Aspire

1 Answer

2008 Toyota Highlander Sport AWD when starting off the engine seems to rev fairly high for very small vehicle movement. At idle engine revs around 1000RPM. Gas mileage is poor,17MPG for about 80% city, 20%...


yes it is normal many customers complain about how the newer cars are not as responsive from a stop basically you have to hit the gas then the car goes seems to rev high to people with not a lot of movement becausse of this its because the newer cars are throttle by wire when you hit the gas it sends a electrical signal to the throttle to go instead of a few yyears back they were you hit the gas and the cable attached to gas pedal pulls back throtttle much more responsive hope this helps

Feb 20, 2009 | 2008 Toyota Highlander

Not finding what you are looking for?
2002 Hyundai XG350 Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...