Question about Mitsubishi Cars & Trucks

Open Question

P1276 code on Mitsubishi common rail sytem. What is the meaning?

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Starting Problem

get towed to local dealer garage is not equipped to work on the vehicle.

Jul 11, 2015 | Mitsubishi Cars & Trucks

1 Answer

Trouble code p0087 machine just stopped running

fuel rail/syteme pressure too low /possible dirty fuel filter or fuel pump getting worn. if it is running normal it could be the fuel pressure sensor.

Jan 06, 2015 | Cars & Trucks

1 Answer

My mitsubishi L2 4d56 diesel engine common rail direct injection have not start because there no spraying diesel in the nozzel tip,what is the problem of this?

the injectors arte electronically controlled so check the immobiliser. cam crank position sensors. run fault codes. I nothing shows up have an accredited diesel specialist shop check the pump as there may be a high pressure problem ( pump failure-- common in common rail diesels as they will not tolerate dirty fuel, water and some additives in the fuel)

Aug 16, 2014 | Cars & Trucks

1 Answer

2005 ford excape with fuel rail pressure sensor, getting error code. Is there a diagram that shows where it is located if i want to replace it my self.

It is a fuel rail pressure switch

So you look on the fuel rail

If you dont know how to do that or test it,
you don't get involved

Just because you got a code, doesn't mean that is a problem

I called a Lincoln Dealer earlier this year & they only sold
4 in four years total, for all vehicles they service & outside parts sells

So that is not a common failure at all

Sep 22, 2011 | 2005 Ford Escape

2 Answers

2005 freestar emission lite on code P10191&P193

Both codes P0191 and P0193 on Ford means Fuel Rail Pressure Sensor Circuit High Conditions. That means that the PCM detected that the FRP sensor signal was more than 4.5v.

Possible causes:
* FRP signal shorted to VREF or VPWR.
* FRP signal open
* Damaged FRP sensor.
* Damaged PCM.

Check ground connections.

Sep 12, 2011 | Ford Freestar Cars & Trucks

2 Answers

I own a Mitsubishi diesel Pickup Truck 2005. Just recently serviced. Had the Oil, Air and Fuel filters changed and also the Glo pluggs. When the engine is cold it stalls when starting. James.

2005 so this vehicle is common rail and as such is all electronic computer controlled and as such is beyond the means of any mechanic to sort out without the special software which is now encrypted on models from 2005 so iam afraid its a dealer only job

Mar 07, 2011 | 1988 Mitsubishi Pickup

1 Answer

2005 Volvo V50, 2.4i Problem Hi, My check engine light is on. Trouble codes are P0172 & P0190. Maybe they are related ?

172 is sytem to rich, 190 is fuelrail sensor malfuntion. Replace the fuel rail sensor and this will fix your problem.

Jan 21, 2011 | Volvo V50 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides