Question about 1993 Saab 9000 Hatchback

1 Answer

My son in law is trying to put on a serpitine belt on his 9000s saab. How many pulleys does he need to hook it to?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saab Master
  • 6,674 Answers

There should be a diagram of belt routing underside of hood, or on radiator support, across top of rad. If not, get back to us with year, make, model, & engine, please.

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My serpitine belt keeps comeing off


The Crank Damper Pulley is worn out &
out of alignment & or tensioner pulley is weak

Nov 30, 2012 | 1992 Dodge Caravan

1 Answer

Changing serpitine belt


To loosen tension on belt, on tensioner the center bolt on the pulley c1012d9.gifput a wrench and turn it clockwise and that will release the tension on the belt.

Jul 02, 2010 | 1999 Buick LeSabre

1 Answer

Loose serpitine belt on my saturn wagon


needs a new belt tentioner. it will run you from between $60-$80 depending on where you go. but thats the only thing that would cause your belt to be loose. while the belt is off i would check all the pulleys for "play" by trying to wiggle them, if the wiggle they need to be replaced as well, its common on saturns for the belt tentioner and idler pulley to go together.

Jan 22, 2010 | 1997 Saturn SL

1 Answer

I need to replace the serpentine belt on a 1995 Saab 900 s


Use a 6 or 8 inch 1/2 socket extension bar and place it in the top of the tensioner pulley, there is a notch in pulley for this. The tensioner pulley is near the firewall at the top of the engine....make a diagram of the belt routing and note which side( smooth or grooved) is lying on the pulley(usually grooved side of belt). Next you would pull tensioner pulley forward and slip the old belt off....you would route your new belt the same way and slip it on the tensioner pulley last.....you will need to pull the tensioner pulley forward again to get the slack you need to slide the belt over the pulley. I have found the Saab to be one of the easiest cars to change the serpentine belt on. I hope this helps.

Nov 28, 2009 | 1995 Saab 900

1 Answer

Where is the fuel filter on a saab 9000s


The filter is under the car near the right rear wheel/right rear suspension.

Jul 19, 2009 | 1992 Saab 9000

1 Answer

How do I get the tension off the serpitine belt to remove


on the bottom there is a tension pully u can adjust it from there

Jul 09, 2009 | 1997 Buick Skylark

1 Answer

Need belt diagram


go to schucks or auto zone they can give you a copy of the diagram, get it from whee you bought the belt, also the diagram should be on the hood under it near emissions sticker or on the air cleaner or on the radiator core support.

May 29, 2009 | 1995 Saab 900

1 Answer

Serpitine Belt routing info for 1994


I dont think saab made a 2.5 engine.. re check that and lemmie know

Mar 08, 2009 | 1994 Saab 9000

1 Answer

How do i release the tension pulley


Usually the carrier pully "tension pully" has a square hole in the front of it. It usuallu takes a 1/2 inch breaker bar but occassionally they will use 3/8 breaker bar. Find the hole, insert breaker bar, or a ratchet (you may need a pipe on the ratchet) and put pressure on it. Generally counterclockwise is the direction you need to go. That will release the tension on the belt while you are maintaining pressure on the breaker bar while it is inserted in the pulley. Remember how the belt is routed.

Dec 27, 2008 | 1995 Saab 900

1 Answer

Belts sqeeling on cold start up.


check your tensioner pulley and idler pulley by removing serpitine belt spin the pulleys inspect for roughness and endplay all so check harmonic vibration dampner pulley the one at crankshaft for seperation/endplay the rubber cracs and pulley walks on startup you could draw a metal file across the inner face of serpitine belt this will remove glazing or replace belt may be even better

Nov 30, 2008 | 2005 Pontiac GTO

Not finding what you are looking for?
1993 Saab 9000 Hatchback Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

rgbypoet

Level 2 Expert

161 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...