Question about 1996 Chevrolet Blazer

1 Answer

I have been searching for the push button four wheel drive assembly which broke when it got cold. what is this part called and where could i find one

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The switch is on the dash 4 wheel drive switch try your local junk yard or the dealership they they dont sell them at auto parts store
use a small screwdriver to remove it from the dash

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Four wheel drive doesnt engage


Sounds like you have a bad switch.

Apr 21, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

My 97 z71 does not into or out of four wheel drive


there is a sensor on the tranny or transfer case that may have gone out check this and you may have a quick fix

Aug 23, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

PUSH BUTTON FOUR WHEEL DRIVE FORD RANGER NOT WORKING


the transfer case is sticking from non use, change the lube in the case ( Ford ATF) and drive it for awhile it should be ok then.

Apr 07, 2009 | 1988 Ford Ranger

1 Answer

Four wheel drive won't engage


Try to rock it by putting it into D an R it works for my truck.

Feb 18, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

Four wheel drive in cold


It is due to the cold weather,The fluid is to thick when cold for the actuator to engage the 4wd.

Please rate this solution.

Jan 16, 2009 | 2007 Chevrolet Colorado (Extended Cab) New...

1 Answer

Vehicle


they have push button 4x4

Jan 03, 2009 | 1996 Chevrolet S-10 Pickup

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

1994 chevy s10 blazer 4x4 push button type


small sylinoid on the top of the transfer case needs replaced. easy to do. it has three vacumelines going to it just trun out and replace like a bolt.

Dec 10, 2008 | 1994 Chevrolet S-10 Blazer

4 Answers

2001 Chevy Blazer 4 wheel drive


The four wheel drive systems in these vehicles are simple. The push button controls the four wheel drive computer. The computer tells the encoder motor (on transfer case) to shift. When the transfer case shifts there is a vaccum switch on the transfer that is activated which sends vaccum to the accuator under the battery. The accuator pulls a cable to lock the front axle in. This covers all s series trucks and suv's with push button four wheel drive but not with auto or all wheel. Now to answer some questions. If your push button is lit up but will not go in to four high you should try to reset the four wheel drive computer. To reset pull the courtesy light and atc fuses for sixty seconds install fuses then cycle key on and off 5 times. If your transfer case shifts but your front end does not lock in check for vaccum at the switch on the transfer case in and out. If no vaccum out replace switch motormite number 49315 at parts store. If you have vaccum out check accuator.

Jun 02, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...