Question about 1997 Ford F150 Regular Cab

1 Answer

Housing how do i change the tail light after i have taken the two little screws out i can not get the housing off the truck

Posted by on

  • John Allen Feb 02, 2009

    ya thanks didnt realize you had to pull the **** out of it without breaking it................... THANKS

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 424 Answers

Put the tail gate down and see if there are two 8mm bolts holding the tail lamp

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wondering how to change the third brake light (one located in back window) on a 2006 hyundai sonata


High Mounted Stop Lamp Removal & Installation To Remove:
High Mounted Stop Lamp hyundai-06-00-5896.gif

  1. Disconnect battery negative cable.
  2. Disconnect high mounted stop lamp electrical connector from inside trunk.
  3. Remove package tray.
  4. Replace bulb from package tray.
To Install:
High Mounted Stop Lamp hyundai-06-00-5896.gif

  1. Install package tray.
  2. Connect high mounted stop lamp electrical connector from inside trunk.
  3. Connect battery negative cable.
prev.gif next.gif

Oct 12, 2010 | 2006 Hyundai Sonata

1 Answer

How do you remove the tail light assembly to change bulbs on a 2003 frontier sc.


There are two phillips-headed bolts on each inside corner of the truck bed, behind the tailgate latches, that may be used to attach the brackets for the optional bed extender. If you have a bed liner installed, you will need to pull the corner of the liner back to expose the bolts.The factory bed liner needs to be flexed around the upper cargo hook to gain access to the two hex head screws that hold the tail-light housing against the body.Remove the screws so the tail light housing gets loose and easily comes out. this will help.please keep updated for further assistance if more help required. thanks.

Apr 29, 2010 | 2005 Nissan Frontier

1 Answer

Replacing tail lights on a versa hutchback


I changed my wife's last night and there is no need to take the tail light housing out. I have taken it off before but you do not need to access the light. Use a pair of needle nose pliers and get the light out. If you insist on taking the housing out, take the nuts off the house from inside the trunk and pull hard. It is really stuck in there but will give way.

Apr 04, 2009 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Cannot replace the tail light (drive side) on my 2000 camry.


Open your trunk, two or three phillips screws, remove them, tail light should pop out with a little persuasion. If you are replacing the bulb just twist the bulb housing and it should pull out easily.
Hope this helps.

Mar 08, 2009 | 1997 Honda Civic

1 Answer

Changing the 3rd tail light bulb on a 1993 mustang convertible


The light has two philip screws. They should come out fairly easy. If not, you may need to put a little pressure by prying it out with a small screwdriver while unscrewing the two philips screws. If you have to do this be careful as you can chip the paint or worse; crack the spoiler. Good luck.

Feb 11, 2009 | 1993 Ford Mustang

2 Answers

Rear blinker light change 2001 ram1500


Hello
Welcome to FY
open the tale gate look at the side where the light is there is 2 screw that hold the light to the box
RD

Jan 10, 2009 | 2001 Dodge Ram 1500 Truck 2WD

3 Answers

How to access brake tail light to change


Tail light replacement is not as hard as it seems.
Tools needed:flat head screwdriver and a deep 5/32 socket(a pair of pliers will work).
Step 1: open trunk and pull back truck liner at tail light.There is a small button clip on liner.Use screwdriver to pop up the center of button clip,pull clip out of hole.
Step 2:You will see a black wire attached to the body of car with 2 white clips.Use screwdriver to pop clips off of studs.
Step 3:Remove the nuts from the studs and pull tail light assembly straight back away from car.The outer side of the light just snaps in and out of place.
Step 4:Turn light socket counter clockwise 1/3 turn and pull out.
Step 5:Pull bad bulb straight out and replace.Reverse steps to reassemble.

Oct 24, 2008 | 2007 Nissan Sentra 2.0 SL Sedan

2 Answers

Replace a tail light bulb


If there is no "access panel" at the rear panel, look to see if there are any exterior screws around the lamp housing. If not, you have to remove the interior trim panel(s) from inside the car. Under there, you will find 3-4 8 or 10 millimeter nuts. Remove them, and pull the whole housing out.

Sep 25, 2008 | 1990 Toyota Celica

2 Answers

Tail light removal


You remove the tail light by removing the nuts or bolts from inside the trunk area. This is what holds the tail light in place.

Jul 21, 2008 | 1998 Honda Accord

2 Answers

Changing brake bulbs


Open the back gate of the jeep. There chould be 2 screws that hold in the light assembly. Remove the screws and pull out the assembly. Replace the bulbs and replave the housing.

Jul 20, 2008 | 2002 Jeep Liberty

Not finding what you are looking for?
1997 Ford F150 Regular Cab Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...