Question about 1995 GMC Suburban

1 Answer

Need to put a new tranny in my suburban,95' 2 wheel drive

Would you know what tranny will bolt up, i heard somethin about the brain might mess up if not the right one??!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 220 Answers

Your suburban should have a 4L60E transmission if it a 1/2 ton C1500. Mine is a 4 wheel drive, but it is the same transmission except for the tail shaft to accomodate the transfer case. The 3/4 ton trucks came with a 4L80E.

Posted on Jan 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 4wheel drive doesnt work? What can I do or look at to fix?


4 wheel drive does not work - CarGurus

www.cargurus.com > Questions > Chevrolet > Suburban

CarGurusDec 17, 2009 - 4 wheel drive does not work - When I put the Sub in 4 wheel drive, low of high ... I want to "add" 4 wheel drive to my 95 1500 suburban w/ a 350.

My 4 wheel drive stopped working - CarGurus

www.cargurus.com > Questions > GMC > Sierra 2500

CarGurusJul 15, 2014 - My 4 wheel drive stopped working - After struggling with the 4 wheel drive ... sometimes in low sometimes in high, now it doesn't engage at all.

4WD not engaging all the time. - CarGurus


Dec 05, 2015 | Cars & Trucks

1 Answer

I have a 1998 GMC Suburban that pops out of gear sometimes I have to put in four wheel drive then back into 2 wheel drive then it fixes itself. I had the tranny and transfer case rebuilt but it still does...


Sounds like your talking about a transfer case problem,
need to have the truck to look over ,test,road test etc
Can't do anything from here,without the patient

Aug 07, 2013 | 1998 GMC Suburban

1 Answer

Hey there, Ive got a 4 banger 98 accord with a


this is a TCM (tranny brain) operated, A/T
so scan it, in this old car , it either scans with the PCM or
has its own blink codes, the TCM.
D4 means, TCM is Unhappy, please scan me for lastest news !
the engine too, is bad. but id fix that first because the tranny brain
uses,. 4 engine sensors to run'
so scan the PCM (engine brain) first. fix that first.

alldata.com has all this.. every word every step.
why not read that.?
connect scan tool $9 tools work, and scan the PCM. (ask)
get all DTCs (errorrs) and most them,, here ill also lookup
how to scan your old TCM now.
here is lots for free books on this car.
http://hondatech.info/downloads/Auto/Manuals/Accord/

the PCM when scanned will report 10 unique DTC errors
for the transmission.
and VSS, ECT, TPS, and CKP sensors must be good or
the tranny will fault.

98
http://downloads.hondatech.info/Auto/Manuals/Accord/Ab0VE.Honda%20Accord%20ESM%2098-00_CD_ISO.zip


Aug 01, 2013 | 1998 Honda Accord

1 Answer

Can i put a motor from a 95 cadillac sts(32v northstar) into a 95 cadillac concours?


AS LONG AS MOTOR MOUNTS ARE IN SAME PLACE AND THE TRANSMISSION BOLTS ON THE TRANNY HOUSING ARE SAME SPOTS SAME GOES WITH FLY WHEEL BOLT TO TORQUE CONVERTER MAKE SURE THOSE THINGS ARE EXACTLY SAME LINING UP U SHOULD HAVE NO PROBLEM

Jun 10, 2012 | Cars & Trucks

1 Answer

Would a 5.7L engine fit in a 7.4


it will go in. It will bolt to the trans. Non of you brackets or accessories will bolt up. You will need all the brackets and mounts and exhaust manifolds.

Apr 03, 2010 | 1995 Chevrolet Suburban

1 Answer

00' Kia Sephia LS not shifting past 1st gear


first you need to buy transmission fluid new filter and new gasket.you need 11.4 pints of transmision fluid.raise front of vechicle.set parking brake.block both back wheels.besure support vechicle weight with jack stands. get a drain pan.if your transmission pan dont have a drain plug.loosen rear pan bolts a few turns.remove the front and side transmission pan bolts. let fluid drain.remove tranny pan. then clean old gasket material from transmission and pan carefully.dont scratch or damage surface.clean old tranny bolts using brake cleaner or buy new tranny bolts.you have to put a tiny film of rtv silicone on tranny bolts so they wont leak.carefully remove old tranny filter and put on new filter.clean all grease grim away from tranny pan it should be **** and span because.you might need a little gasket adhesive to hold gasket in place while putting pan back on transmission.to line up bolt holes.loosely put all bolts in you have to move pan a little to get holes line up.when all is finish put tranny fluid back in.besure you put 11.4 pints back in that about 6.5 quarts. make sure tranny fluid level is right before driving vechicle.l

Jun 19, 2009 | 2000 Kia Sephia

2 Answers

98 Chrysler Sebring 2.5 6cyl wont start. engine wont even turn


sounds like your starter ruined your flywheel. replacing the flywheel is not easy. also expensive. call a couple of tranny shops to get an estimate.

Mar 24, 2009 | 1998 Chrysler Sebring

1 Answer

TRANSMISSION


The two wheel drive tranny won't work because it will be longer. The tranny that came out of the 4 wheel drive is shorter and the transfer case bolts to the rear of the tranny thus it has a shorter output shaft and a different spline to accommodate the transfer case. You need to find the correct tranny unless you want to change the internals from one tranny to the other.

Feb 26, 2009 | 1988 Ford Bronco II

1 Answer

Surburban has gone into four wheel drive and will not come out


you might want to check the gear selector switch that is located on the driver side of the tranny, if the 4x4 is electric and not manual for engagement, selector must read neutral to disengage 4 wheel drive. by experience if you drove it through deep water gear selector switch can get damaged.

Jan 30, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

Service 4 wheel drive


This year model has had problems with the "Encoder Motor" Its is a bolt on unit around 300 dollars if you do it yourself. I would just leave it in 2WD for now.

Jan 19, 2009 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
1995 GMC Suburban Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...