Question about 2005 Pontiac Montana

Open Question

GM Versatrak question

Have a '05 pontiac Montana with Versatrak AWD, which of course doesn't work. 99% sure it's the differential clutch pump actuator valve & more specifically the temp. sensor within. The more I research this, the less appealing the Versatrak appears to be. Seems the differential clutches are somewhat engaged all the time, leading to often required multiple flushings of the magic Ver$atrak fluid. My question is; would it be possible to put a switch in the wire (for the new $400 dif. clutch pump actuator/temp. sensor that I haven't installed yet) to disable the AWD & then turn it on when actually needed? Has anybody done this, which wire is it, & do you cut continuity or send it to ground.

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 2000 pontiac montana torque converter clutch

It is one drivers side on the back of the transmission

Posted on Oct 10, 2009

Ad
  • 5 Answers

SOURCE: where is the clutch pump actuator check valve

it's on the rear wheel drive compartment b672020.gif

Posted on Jul 18, 2010

  • 1 Answer

SOURCE: 2004 AWD Aztek - AWD Disable light on.

I had this happen to my car and paid entirely too much to the dealer to get it fixed. For me, it was the harness that you think it is, and it affected the battery- I needed to replace it- and also the computer. I'm not sure if mine was frayed, but I've heard that this harness has been known to become frayed and shorts out because of that, which is what I imagine causes the failure, and the shorting out is what destroyed my battery and fried my computer.

Posted on Nov 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

VERSATRACK HOW TO REPLACE rear diff acuator


Do you mean AWD rear flow valve? Put drain pan under rear differential, unhook connector, unscrew flow valve bolt and pull it out. Reverse order to install. You will need to refill with 4 pints of versatrak fluid (unscrew fill plug) because when you remove the flow valve, all the versatrak fluid comes out. You can only get versatrak fluid at any GM dealership. Do not reuse old nasty versatrak fluid because that is why it got plugged up in the first place.

eb830297-af9a-4079-9ea4-1b1684007cba.jpg

Oct 20, 2014 | 2002 Buick Rendezvous

1 Answer

Awd disabled 2005 buick rendesvous


It is the AWD rear flow valve, on the rear differential that is bad, not the ABS! This is how to replace it after buying a new one. Put drain pan under rear differential, unhook connector, unscrew flow valve bolt and pull it out. Reverse order to install. You will need to refill with 4 pints of versatrak fluid (unscrew fill plug) because when you remove the flow valve, all the versatrak fluid comes out. You can only get versatrak fluid at any GM dealership. Do not reuse old nasty versatrak fluid because that is why it got plugged up in the first place. (ASEGM)

2d0be49d-bb62-4173-861e-b1352e31eb5f.jpg

Oct 17, 2014 | 2005 Buick Rendezvous

1 Answer

AWD Disabled light is on in my 2002 Buick rendezvous


The problem is the AWD rear flow valve. Put drain pan under rear differential, unhook connector, unscrew flow valve bolt and pull it out. Reverse order to install. You will need to refill with 4 pints of versatrak fluid (unscrew fill plug) because when you remove the flow valve, all the versatrak fluid comes out. You can only get versatrak fluid at any GM dealership. Do not reuse old nasty versatrak fluid because that is why it got plugged up in the first place.

4c9bc0d6-7852-494f-be3d-ff1226269051.jpg

Oct 11, 2014 | 2002 Buick Rendezvous

1 Answer

How much fluid for differential and transfer case on 2008 equinox?


CARRIER ASSEMBLY -- DIFFERENTIAL (REAR DRIVE MODULE)
Axle Lubricant (GM Part No. U.S. 89021677, in Canada 89021678

16 oz

TRANSFER CASE (POWER TRANSFER UNIT)
VERSATRAK Fluid (GM Part No. U.S. 12378514, in Canada 88901045).
.85 qts or .8 liters

Aug 21, 2014 | Cars & Trucks

4 Answers

99 pontiac montana overheaten already changed thermostat what is it?


you have a GM common problem and that is a bad intake manifold gasket. GM change the gaskets to plastic and they crank and leak causing over heating. here is a picture of one i took from a 2005 pon. bonneville with 74,000 miles on it2_12_2013_3_00_09_am.jpg

Feb 12, 2013 | 1999 Pontiac Montana

2 Answers

All well drive message on dash board " AWD disabled"


The problem is the AWD rear flow valve. Put drain pan under rear differential, unhook connector, unscrew flow valve bolt and pull it out. Reverse order to install. You will need to refill with 4 pints of versatrak fluid (unscrew fill plug) because when you remove the flow valve, all the versatrak fluid comes out. You can only get versatrak fluid at any GM dealership. Do not reuse old nasty versatrak fluid because that is why it got plugged up in the first place.

[img src="http://i.fixya.net/uploads/images/4c9bc0d6-7852-494f-be3d-ff1226269051.jpg" alt="4c9bc0d6-7852-494f-be3d-ff1226269051.jpg">
Posted on Nov 16, 2014

May 24, 2011 | 2005 Buick Rendezvous

1 Answer

The all wheel drive doesnt work only the front tires spin in the snow


The 08 Vues AWD system is very different than from previous models. The new Vues system is more like the technology on the Outlook. I' don't know detail on the hardware, but from a function standpoint there are two big differences:

1)The system is PREDICTIVE, not reactive. It does not wait for wheel-slip to make it engage. The system monitors throttle position, steering angle ect. and re-directs torque before wheel spin occurs.

2) The old system sent extra torque to the wheels that were slipping to boost traction. The new system sends power to the wheels that are gripping.

The result is a better, smoother system that will do a better job of keeping the Vue from getting stuck.

The old system was a single gerotor type AWD system. Essentially, a gerotor AWD system uses differences in rotating speed to spin a pump and apply pressure to clutchs. The single gerotor system used in the Vue essentially engaged and disengaged the rear axle when a differences in rotating speed occurred between the drive shaft and rear differential (indicating the front wheels were spinning faster the rears). From here on out, power goes into an open differential and was distributed accordingly (i.e. not very well).

GM also uses a twin gerotor system in the form of Versatrak. This operation in much the same manner, using a difference in rotating speed to spin up a pump and apply pressure to clutches, except the Versatrak system has a pump for each output axle. This allows the rear differential to act of each rear axle much in the way a limited slip differential does, better managing torque distribution.

The new system used in the Vue (as well as the Outlook, Acadia, and Enclave) is controlled by a microprocessor and operates by means of an electromagnetic clutch. It is very similar to the Haldex system marketed by Haldex Traction AB. The main difference being that Haldex still uses hydraulic pressure to apply the clutches, while the electromagnetic system used by GM (which I believe is developed by Borg Warner) uses electromagnetic force to apply the clutches. The operating principles are the same though. The new GM system is well integrated with stability control, traction control, and ABS. The system actively monitors vehicle dynamics and driver input to determine when to being engaging AWD before it is actually needed. With the ability to manipulate power delivery using AWD and stability control (by selectively applying brakes at each individual corner), the new Vue is very robust in terms of torque management. For all you folks in the snow belt, it should be dynamite in slippery conditions!

Hope this helps answer your question. Good luck and be safe on the snow.

Dec 12, 2009 | 2003 Saturn VUE

2 Answers

Awd disable light remains lit


Most common repair to solve the problem is replace flow valve on the rear differential and also replaced 4 pints of VersaTrak at the same time. (I'm a retired GM engineer.)

Nov 11, 2009 | 2006 Buick Rendezvous

1 Answer

Noise in car rear


The rear differential either needs versatrak fluid added or changed.
Located at the rear of the vehicle loosen the top hex bolt and stick your finger in if you don't feel any fluid add some. If you do feel fluid see what color it is. It should be clear if not then its time for change.
Versatrak fluid can be purchased at any GM dealer .You will need almost 4 bottles to do a full change.Once you have either added or changed the fluid do some circles around left and right and drive a few blocks then circle around again and your groaning noise should be gone!

Oct 10, 2008 | 2005 Pontiac Aztek

Not finding what you are looking for?
2005 Pontiac Montana Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...