Question about 2008 Chevrolet Uplander

2 Answers

Uplander wont start after changing battery

Wont turn over after replacing battery

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,040 Answers

Check contacts for corrosion and tightness. It worked before you replaced the battery, right? So go over all you touched during the transition.

Posted on May 02, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 11,037 Answers

Wont turn over after replacing battery ??????? When you turn the key to the start position nothing happens ? Have to ask because won't turn over means something else to somebody else .
You have a engine cranks - no start or you have a no crank - no start .
Do the light's on the instrument cluster come on when you turn on the key ? Do the Headlamps work ?

Battery Disconnect or Replacement Problems

Posted on May 02, 2017

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: keyless entry on a 2005 uplander wont work

i had the same problem and the keys need a reprograming it is easy just look at ur owners manul and find how to program your keys it will take 5 mints.

Posted on Dec 23, 2008

  • 1810 Answers

SOURCE: 2006 uplander wont start even with purchasing a

security security i think im being stolen

allert allert \

opps i mean do a code check it will likely show a fault in security system

Posted on Jan 10, 2010

SOURCE: my chevy malibu wont start.

2001 Chevy Malibu would not crank. Theft system was blinking,turned key to on
position until theft light cleared {about 10 minutes} turned to off position and it started when I restarted.

Posted on Jan 26, 2012

  • 16 Answers

SOURCE: changed battery now wont start

sounds like security system needs relearned .turn key and try to start then release key to the on position the security light will stay on for about ten minutes then go off ,turn ignition key to off position for five seconds then repeat the cycle two more times the system will then relearn code .takes a while but saves you $75.00 program fee

Posted on Sep 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed battery on 2007 chevy uplander now it wont start


Is the security light on ? May need to reprogram the anti-theft keys

Jul 10, 2017 | Cars & Trucks

1 Answer

Rapid clicks when starting wont turn over


could be a weak battery enough power for the lights but not enough to turn the engine. charge the battery and have it checked. also sometimes the wires that go to battery get loose. also check the wire that runs from the battery to the starter where it bolts on to starter remove it and clean with wire brush or sandpaper and reinstall u should do the same with the battery cables. hope this will get u going

Apr 16, 2014 | 2007 Chevrolet Uplander LS Minivan

1 Answer

I have a07 chevy uplander car wont start horn will honk


mine was cas I was out of gas or the battery was dead

Jun 24, 2012 | 2007 Chevrolet Uplander

1 Answer

When I try to start my 2006 Chevrolet uplander it just clicks and wont start. Why?


Maybe bad battery or corroded battery terminals. I'd look at the terminals first and clean them with sandpaper, knife, wire brush,etc. still won't start get a jump and see if it will start and go to Advance Auto or a auto parts store like it and get a Charging system check..they'll do it for free and you'll know for sure what it is. And if you end up needing a battery they'll install it for free. Next in line is the Alternator and that may be something you'll want to get a mechanic for.

Nov 07, 2011 | 2006 Chevrolet Uplander

1 Answer

2006 uplander wont start even with purchasing a


security security i think im being stolen

allert allert \

opps i mean do a code check it will likely show a fault in security system

Jan 10, 2010 | Chevrolet Uplander Cars & Trucks

1 Answer

Keyless entry on a 2005 uplander wont work


i had the same problem and the keys need a reprograming it is easy just look at ur owners manul and find how to program your keys it will take 5 mints.

Dec 23, 2008 | 1997 Chevrolet Astro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...