Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jun 19, 2017

87 nissan d21 transmission specs

I have an 1987 nissan d21 with the naps-z 2.4l engine and 5 speed standard transmission. i had to replace the transmission and i got one from a 1997 pickup with the ka24e. i'm trying to find the gear ratios of the 1987 transmission to compare with the new one to know about how much tweaking i need to do to my engine to work right with the newer gearing. can't find any info on the 87 transmission online. any help would be appreciated thank you =]

1 Answer

Steve P

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Nissan Master 3,912 Answers
  • Posted on Jun 19, 2017
Steve P
Nissan Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 15, 2012
Answers
3912
Questions
5
Helped
1306575
Points
15904

Hey Anon, You are pretty much stuck with what you have now..the only thing else you could change is the rear gear ratios... Just make sure everything works and let 'er rip.. no need to do anything...

5 Related Answers

Anonymous

  • 139 Answers
  • Posted on Apr 09, 2009

SOURCE: cant find manual for 1990 nissan d21 pickup

you have to take drive shaft down,remove front yoke
and slide shaft out, replace bearing then reverse
procedure

Ad

Anonymous

  • 672 Answers
  • Posted on Aug 15, 2009

SOURCE: 97 Nissan Pickup transmission swap for 95 or 96 transmission?

yes this will fit, model years 88-97 will fit. I would recommend the newest model you can get, as they improved internal hardware after 93. hopefully this helps

Anonymous

  • 1 Answer
  • Posted on Nov 21, 2009

SOURCE: Transmission pops out of 5th gear

The synchro's in your transmission are shot. Time to replace them or the transmission fully.

Anonymous

  • 563 Answers
  • Posted on Nov 26, 2009

SOURCE: how do I replace the driveshaft bearing support?

You jack up the truck, and support it on jack-stands. (no wheel must touch the ground, for safety).
Remove the two front tires for visibility.
Put the tansmission in neutral and apply the handbrake.
Get under the truck and in the area of the support-bearing, mark the position of the driveshaft to the flange, which has 4-bolts.
Remove the 4-bolts.
Pry off the driveshaft with a flat-end screwd-river.
Remove the bolts holding up the support bearing.
Drop it down and pull off the support bearing.
Reverse these procedure for installation.

Patrick Rayome

  • 1757 Answers
  • Posted on Apr 10, 2010

SOURCE: i need to know what the timing needs to be set to

Click on the following free direct Link. It has the correct Timing Belt Diagram for your 1987 Nissan D21 Pickup with the unspecified 2.4L SOHC In-Line 4, or the 3.0L SOHC V6 Engine.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1987/make/nissan/model/pickup/1987_nissan_pickup_timing_belt_diagram_marks.htm

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1989 Nissan D21. Will the pickup fuel pressure regulator fit in a 90 to 93 model?

USA cars? or not? learn that cars are not the same world wide. ok?
will if you had shopped for the part the seller shows all cars it fits.
so why not learn to at least shop and learn that, for free
or at the dealer that sells it, oops TOO OLD (most parts are from them even 10 years old)
gee and fit is not the ONLY factor, the pressure it regulates must be in PSI spec, or injections will be wrong for sure. out of spec.
what car is the target car, the post is contradictory, sorry./
what car is busted.
89 to 92
93 to 89
then a 90 is told,????
off hand I SAY NO.
AND FOUR SURE NO USED FPR THAT IS GOOD, EVER
THE intenral diapharm is no good now. 33years old new is best
my wild guess is
the car TO RUN is (target runner) is 89 D21 PU.

D21 ,centric answers. OLD old old 1989
The D21 generation was the successor to the Datsun 720, sold as the Nissan Datsun Truck in Japan
this model was available worldwide !!!!!
The D21 series were called Nissan Hardbody in the United States/
so NO D21 here so said the wiki,
are you here
Nissan D21 (Chile)
12 engines used world wide.
The Nissan Pathfinder was derived from the Hardbody Truck and started in the same model year with chassis code WD21.
so AGAIN,what country is this 1989
and what engine is there, D21 list
the parts are NOt THE SAME, for sure FUELing. parts.

1.6 L Z16 I4
1.6 L NA16 I4[37]
1.8 L Z18 I4
2.0 L NA20 I4
2.0 L Z20 I4
2.4 L Z24 I4
2.4 L KA24E I4 (1990-1997)
3.0 L VG30i V6 (1986-1989)
3.0 L VG30E V6 (1990-1997) (no)
2.3 L TD23 I4 diesel (1987-1992)
2.5 L TD25 I4 diesel (1988-1996)
2.7 L TD27 I4 diesel (1988-1996)
0helpful
1answer

1987 nissan d21 5 speed trans specs

I would install smaller diameter tires and wheels to do the tweaking .
0helpful
3answers
0helpful
1answer

Vaccum diagram, for a 1986 nissan d21

how can I get a 1986 nissan D21 manual 5 speed transmission diagram
1helpful
1answer

I have a 1987 nissan pick up d-21 with the 3.5 DOHC engine and a 5 speed manual trans in this 4X4 I am pulling the engine out, do i have to pull the trans ? or can i oull just the engine? The oil pan seems...

I don't recall what those are like under there but things I have done to leave the transmission in are,
Pull the drive shafts and unbolt the transmission mount so it can be slid back but left in the truck.
Unbolt the mount (or leave it bolted if it will move enough) so the transmission still sits on it but jack the front of it up while lifting the motor so it can be pulled out of the trans enough to clear the input shaft.
Sometimes they take a little pull the motor forward and inch and then lift and inch then pull forward another inch and then lift another inch.....

Good luck on your swap. I was just doing the head on a 87 Nissan D21 with the Z24i and was looking for a later donar with ported injection for it instead of that TB injection also.
0helpful
1answer

87 nissan d21 accelerates until you press the gas to hard then it seems to rev out

replace spark plug wires, or possibly the fuel filter/ fuel pump
mine had the same problem turned out to be coil wire
4helpful
1answer

I need to know what the timing needs to be set to on my 1987 nissan D21 pickup

Click on the following free direct Link. It has the correct Timing Belt Diagram for your 1987 Nissan D21 Pickup with the unspecified 2.4L SOHC In-Line 4, or the 3.0L SOHC V6 Engine.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1987/make/nissan/model/pickup/1987_nissan_pickup_timing_belt_diagram_marks.htm
Not finding what you are looking for?

807 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...