Question about 2010 GMC Acadia

Open Question

Audio muted phone muted

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why 06Tribeca audio button on steering wheel will not (+) volume but it will (-) volume. Also the mute button will not mute?


Suspect a steering wheel control issue if the volume will work directly from the radio itself.

Jun 08, 2015 | 2006 Subaru B9 Tribeca

1 Answer

Brown mute wire for new ken wood in 2002 rodeo, does it go with illumination wire, green/red or red/green?


Hi, i'll need a bit more info to be able to give you an opinion , am i correct in assuming the "new kenwood " is a radio/cd player ? If so do you have a car phone or a hands free kit for your mobile/cell phone ? Assuming the kenwood is a radio the mute wire has to be connected to the car phone/mobile hands free kit , this is usually described in the phone installation directions , how the mute system works is when you recieve a call the signal is sent via the phone system to the radio , which is where the mute wire comes into use .If you have either of the phone set ups i've described post back with there details , make , model etc ,if you do not have this type of system and are using an ear piece then the mute funtion can't be used , i hope this is of some help to you

Apr 06, 2015 | 2002 Isuzu Rodeo

1 Answer

Where is the audio dampening thing located so i can check it?


not sure what you mean - explain more so I can possibly help.
There is a function in the audio menu which increases the volume of the radio with increasing road speed, or there is a mute button on the dash (phone) or on the steering wheel controls (if fitted)

Apr 30, 2013 | 2000 Jaguar S-Type

1 Answer

How do i turn off the mute


if its got premium audio check the power amp in the boot on lh side if it is a normal system sounds like you have a head unit problem does it have a touch screen? it will normally tell you if its muted. lots of different audio combinations for these cars try battery reset

Mar 28, 2013 | 2003 Jaguar X-Type

2 Answers

My phone is stuck on mute


Time to get another phone....

Jun 14, 2012 | 2005 Audi A6

1 Answer

Radio speakers seem to be muted. I pushed INFO button, did this cause something to mute ??


Some radios have phone buttons that mute the speakers so you can talk on the phone. If you have Onstar and no active subscription it can also mute the radio thinking you are trying to talk to Onstar.

Apr 24, 2009 | 2004 Chevrolet TrailBlazer

2 Answers

How do you turn the sound on if mute is on MMI sound system?


Depress the volume bottom or rotate the volume knob. When on a Bluetooth phone call, the speaker symbol will mute, but unmute when the call ends. Either rolling the right steering wheel scroll or the volume button on the shifter area will should unmute the radio volume.

Apr 20, 2009 | 2006 Audi A6

1 Answer

Radio audio muted and cd changer gives message no cd changer c320


Hi, Joe here to help. The cd changer is at fault. You need to replace the changer. The system is on a fiber optic loop which cuts out the sound if can not complete that loop.

Apr 08, 2009 | 2004 Mercedes-Benz C-Class

1 Answer

Unknown Phone on Lincoln Navigator


It means your phone is activated somehow. Cellular Phone NOTE: The audio system does not operate when the portable cellular phone is in use because the audio-mute feature will mute the audio system when a call is placed or received. Portable Cellular Phone Features
The portable cellular phone system is available only with the P100i audio unit and has the following features:
  • hands-free operation
  • radio muting while phone is in use
  • radio displays the phone number, signal strength, and call timer
  • radio can be used to dial stored numbers and adjust hands-free operation volume
For more detailed information, refer to the User's Guide.
------------------
  • Entering ACM Self-Diagnostic Mode.
  • ACM (Audio Control Module) Self-Diagnostic Mode
    NOTE: To enter the Speaker Walk-Around Test or ACM self-diagnostic mode, the ACM must be turned on and in radio tuner mode (AM/FM).
    ACM self-diagnostic mode can only be entered while in the Speaker Walk-Around Test.
    1. To enter the Speaker Walk-Around Test, press the ACM Preset Buttons 3 and 6 simultaneously.
    1. The Speaker Walk-Around Test stops at each speaker and applies a different tone to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the ACM in the following sequence: RF, LF, LR, RR, SUBWOOFER I, SUBWOOFER II.
    1. The Speaker Walk-Around Test automatically continues and tests:
    • the antenna and displays ANTENNA II, for five seconds.
    • for a speaker short. If a short is present, SPKR SHORT will be displayed.
    • for the CD/DJ. The ACM display will show NO DJ if not present. The Speaker Walk-Around Test will end and the ACM will return to its previous setting.
    1. ACM self-diagnostic mode has five tests available:
    • Preset button 1 = Audio internal/external SELF TEST. If SELF FAIL is displayed, press TUNE > to scroll view the DTCs stored. Refer to the ACM Diagnostic Trouble Codes (DTC) Index. If the system is OK, SELF PASS is displayed.
    • Preset button 2 = View/Clear continuous diagnostic trouble codes (DTCs). NO DTCS is displayed if no DTCs are retrieved. If DTCS FOUND is displayed, press TUNE > button to view the DTCs retrieved. Refer to the ACM DTC Index. To clear all DTCs, press the EJECT button. DTCS CLEAR will be displayed.
    • Preset button 3 = SIGNAL TEST. This test measures the average strength at the current tuner setting.
    • Preset button 4 = Software configuration level. This test queries each radio system controller for the software configuration level. SOFT LEVELS will be displayed upon completion of the query. Press TUNE > to scroll view the software configuration version level.


    Controller Description Radio Display Example Main Main micro software version MAIN ##.##.## CDSP CDSP micro software version CDSP ##.##.## ADSP ADSP micro software version ADSP ##.##.## Auxiliary Auxiliary software version AUX ##.##.## CD/DJ CDDJ software version DJ ##.##.## CD Changer CDR software version CD ##.##.## Tape Deck Tape Deck software version TAP ##.##.## RSC Rear Seat controller software version RCP ##.##.##
    • Preset button 5 = DISPLAY TEST. This test will light all the ACM display segments for five seconds, then turn all segments off. When the test is complete, DISPLAY TEST is displayed on the bezel.
    1. To enter these tests, press the preset button desired while in the Speaker Walk-Around Test. This will abort the Speaker Walk-Around Test and start the selected test.
    1. To exit ACM self-diagnostic mode, turn the ignition switch or ACM OFF.
    1. If the concern remains and the fault is not detected, proceed to Symptom Chart to continue diagnostics.
    ------------------------------------
    the module is under the floor console. Do you have the phone user manual.

    Apr 03, 2009 | 2000 Lincoln Navigator

    6 Answers

    Mute Button ON


    The phone button is what does the muting.
    If you feel that is not the problem I would suggest contacting the jaguar dealership in your area.

    Jan 16, 2009 | 2003 Jaguar S-Type

    Not finding what you are looking for?
    2010 GMC Acadia Logo

    Related Topics:

    77 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...