Question about 2007 Scion xA

1 Answer

Drive By! Thanks for the Heads up Worldvet! I would like to Catch whoever is doing this and beat the **** out of them! Just tryin to make a Dime. Thanks again Bro!

Posted by on

  • Travis Humphries
    Travis Humphries Jan 27, 2009

    Thanks! I sent Lauren a Message earlier But I live in OK and I am Sure that she has Gone Home for the Day. I don't get a lot of those But, 1 Bad one can make ya Mad for the Day! Thanks again! Have a Good One!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

You may want to just sift through your IAs. I posted along with you on this guys washing machine. His pipes froze and the thinks he washer was affected by fozen lines either?

Anyway hadn't seen you on the board before and looked at your profile and went to see your IAs because we have had a lot of trouble in the past few months with trawlers doing drive by IA voting.

Lauren has cleared up all that have been found. She knows a good solution from a bad one. She'll fix yours and you can just ask her to give all of yours a casual review. Its her job anyway.

I could have voted on that once and got you to a TFT, but its best removed entirely.

Worldvet

Posted on Jan 27, 2009

  • Glenn Rogers
    Glenn Rogers Jan 27, 2009

    She's on the West Coast, California, Mateo and I'm in Nevada's Gold Country. She can and doesn't mind fixing these. The admin and staff are really trying to find the drive by voters and they have access to logs of course.


    Thanks for the vote.


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hard to start when cold. Acts like a vacuum leak. Heads replaced and has this problem sense than


Maybe it is a vacuum leak that is causing your problem?
If the engine has hydraulic valve lifters maybe it is suffering from tappet jacking due to a stuck relief valve?
Maybe the valves seats weren't properly lapped in and the seatings, especially the inlet aren't sealing very well.

These things and more need systematically checking and I strongly suggest whoever replaced the heads does the work free of charge.

Sep 28, 2015 | Cars & Trucks

1 Answer

Got a 2002 ford windstar. the vehicle is in gear but jus keeps reving up. them shut it off than back on n it will drive foward and reverse than stop n when tryin to drive again it will jus rev up again n...


The transmission filter is stopped up. Change it and add some new fluid and "trans x" conditioner and hope for the beat. Otherwise you need a transmission.

Sep 18, 2014 | 2002 Ford Windstar Cargo

1 Answer

Ferrari parts are missing


Well when you catch whoever was responsable ship them off to bahrein or saudi so they can be tried under shia law .Off with the hands

Apr 28, 2013 | Cars & Trucks

1 Answer

Cant get back right tire off...seems to have some kind of special screw..is that normal


That would probably be a lock nut. I assume they are not factory rims and you didn't put them on. Whoever put them on probably didn't want them stolen. So they went out and bought a lock nut. Which you need a key to take off. The person you got the car from most likely has it. If not you can always use to small of a socket and beat it onto the nut or you could beat it off with a hammer by knocking it back and forth till it breaks(although you might not want to miss). Then all you have to do it go down and but a new lug to put in(couple bucks for a lug. Hope I could be of some help. Good luck

Feb 21, 2011 | 1999 Isuzu Amigo

1 Answer

I tryin to ghange the rods in my ford fiesta car


IF YOU JUST NEED TO FOLD THE SEAT DOWN LOOK UNDER THE BACK OF THE BACK SUPPORT, YOU SHOULD SEE A CABLE ( BLACK) PULLING THIS WILL RELEASE THE CATCH TO FOLD THE SEAT FORWARDS

Dec 09, 2009 | Ford Festiva Cars & Trucks

1 Answer

Rebuild the 305 or go with a 350 engine and the same with trans.


are you going for extra horse or just to have a bigger block. you can do a lot with a small block to give power. change that cam and intake and add a nice 4barrel and some headers and a thrush exhaust and if money is not a problem some new heads . power is in the heds. you can go on line and find vedeos that will show you how to port and polish your heads and you get bigger valves both intake and exhaust been there don this and you can make a bad *** motor

Dec 13, 2008 | 1991 Chevrolet Caprice

1 Answer

How can a piston break or what causes it to break


if you changed the heads you should have gone that one more step and changed the pistons. sometimes if the heads arent mic ed right it causes a catch in the running position and causes the break. i assume the heads you put on were new and now salvage yard material??

Dec 08, 2008 | 1996 Ford Windstar

2 Answers

Tail lights stay on until fuse is taken out brake lights work fine


It happened to me 2 weeks ago, check your brake pedal. there is what we call a pedal stopper (rubber) that pushes the stop light switch everytime you release the brake pedal, and that makes the brake lights shut off. your pedal stopper may be destroyed already. (it looks like a push pin)

hope it helps.

Aug 14, 2008 | 1997 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Brad Brown

Level 3 Expert

13536 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...