Question about 2006 Cadillac DTS
Radio was not working; today after a jumpstart, radio started working again, but tachometer was not working
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
ok, In this New of a vehicle there are no screws holding the headlight in if you just need to replace a headlight because it is burned out. Look at the back of the light where the wires attach and you should see the wires going into what appears to be a coupling. Get a hold of that and turn. After it unlocks you can remove and replace the bulb. If you are replacing the Headlight assembly because it was damaged there are typically 2 long scews on the top front that appear to be adjsutment screws and 2 smaller ones in each side, again on top. Good Luck
Posted on Aug 27, 2009
I have the same car with the same problems except for the tail light. My radio works when it wants. This morning I went out and my trunk was open and now it will not stay closed. I dont know what to do. I have no idea where to start with fixing the radio. Did you ever find a solution.
Posted on Jan 07, 2010
you should have to go thru under the hood to the backside of the lamp assembly. There should be either a hard plastic cap or a plastic dust cover that has the wires going thru it to the lights. If it is the hard cover (looks like a jar cap) turn it 1/4 turn counterclockwise and pull it out of the way. Take the bulb/socket out. Unclip the old one- Put the new one in. (DO NOT TOUCH THE GALSS PART OF NEW BULB). Then re-assemble
Posted on Mar 11, 2010
Tips for a great answer:
Mar 27, 2015 | 2007 Cadillac DTS
Feb 03, 2015 | Cadillac Cars & Trucks
Oct 22, 2014 | 2006 Cadillac SRX
May 01, 2014 | 2006 Cadillac DTS
Jul 23, 2012 | 2006 Cadillac DTS
Aug 24, 2011 | 2006 Cadillac DTS
Oct 28, 2009 | 2006 Kia Sedona
Jan 02, 2009 | 2002 Cadillac Deville
Oct 11, 2008 | 2004 Cadillac Deville
98 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: