Question about 1995 Volkswagen Golf

2 Answers

Clutch adjustment my clutch cable snap andi put a new one on, but it does not allow me to start the car in gear or when i start the car in nuetral and try to select a gear the gears grind...does my clutch need adjust ment and if so car is a1.6 golf 1, 1995

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

  • Contributor
  • 2 Answers

Honda crv clutch cable not workin

Posted on May 06, 2013

  • 1 more comment 
  • everett morton May 06, 2013

    my cable snap

  • everett morton May 06, 2013

    can u adjust a honda crv clutch cable

  • everett morton May 06, 2013

    honda crv clutch cable not workin can it be adjusted


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 64 Answers

Hi! U need to re adjust the cable

Posted on Jan 27, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need help Adjusting automatic shifting cables on 2010 cobalt ls

Put the Trans in park then adjust the cable so the shifter is in park. Then shift to nuetral and make sure the Trans is also in nuetral. Adjust as necessary. Using park and nuetral as alignment points should result in the shift linkage being in the correct position for all gears.

Jul 31, 2016 | Cars & Trucks

2 Answers


Some of that model had an unusual clutch mechanism, which has probably broken due to wear. Read here

In the event yours is instead fitted with a hydraulic clutch, either

- the hose has split
- the clutch throwout lever has broken or collapsed

Mar 21, 2012 | 1995 Ford Escort

2 Answers

I was stuck in snow and attempting to get out. CRX 1988 5-speed manual clutch pressure was good until i got stuck again (AK thing) now pressure is clutch proper but won't engage any if in...

Sounds like your clutch needs replacing. Clutch discs consist of the same sort of material as brake pads. After so much friction and heat they deteriorate quite quickly. If your inclined and have a good assortment of tools you can probably replace the clutch yourself. However this means removal of the transmission so the proper jacks and such are something you should have for safety. The transmission is quite heavy and without the right equipment it could be dangerous.

Mar 15, 2011 | Honda Civic Cars & Trucks

1 Answer

92'isuzu pick-up, 2.3L.manual tran. the truck starts and it goes into all gears, but it hardly moves.I adjusted the clutch cable and it got better I always had to adjust the cable. now it bearly move on...

Yes it is time to install a new clutch kit(clutch disc,pressure plate ,throw out bearing and pilot bearing)also have the flywheel resurfaced.The disc has gotten too thin to be clamped by the pressure plate.Best if you replace everything at once with new parts,avoid rebuilt parts.Good luck!

Mar 06, 2011 | 1992 Isuzu Pickup

1 Answer

97elantra shifter stuck in park but when useing the override button it will move but car takes off in drive

Sounds like to me you may need to have the nuetral safety switch adjusted or replaced. This switch will allow a vehicle to start only if the gear shifter is in the park or nuetral position if it starts in any other gear it may need to be adjusted or replaced hope this helps you.

Feb 28, 2011 | 1997 Hyundai Elantra

1 Answer

Clutch not going into gear. Had new clutch put in just last year.

I dont quite understand what you mean . The clutch releases you transmission from the engine to allow shifting.

If you mean it wont release maybe its not the clutch maybe its the slave cylinder which pushes it or the master cylinder which is connected to the pedal. If its a cable maybe the cable is out of adjustment.

Apr 17, 2010 | Hyundai Motor 2000 Tiburon

1 Answer

How to adjust cluch on a 1995 passat?

I am not to sure but if you have a cable clutch instead of a hydrolic one you can put your car in first gear or nuetral (can't remember exactly ), (not running and on flat level ground) and pull up towards you on the clutch pedal this might take up the slack in the cable. This worked on my 2002 mustang there is a thing called a quadrant that clicks and locks the free play in the stretched cable. Just a suggestion and it's free so what the heck ??? I am not sure if this applies to what is accually wrong with your clutch so it is only a helpfull hint.

Oct 11, 2009 | 1995 Volkswagen Passat

1 Answer

No clutch

Center of clutch plate come apart from the plate.Allowing the cars gearbox to run free.Remove the gearbox and change the clutch.

Jul 11, 2009 | 1991 Peugeot 405

1 Answer

Car cies when brakes are applied, and won't go back ingear.

sounds like your clutch needs adjusting . There should be adjustments on the top or bottom of cable. If adjustment is ok check clutch pedal points the brackets that support it sometimes crack if the cable gets stiff

Dec 27, 2008 | 2005 Ford Focus

Not finding what you are looking for?
1995 Volkswagen Golf Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers


Level 3 Expert

70374 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides