Question about 2003 Honda Civic

1 Answer

Cold Air Intake diagram for 2003 Civic LX 5-speed

I bought this car and it didn't have any air intake parts on it. The previous owner had a cold air kit on it but it was stolen. I have purchased a kit on ebay but since I can't take the factory intake off I need to know what exactly should be replaced or what might be missing that I might need. The kit I bought has written directions, but since I can't take of the OEM air intake, these directions are unclear. Does anyone know where I can get a diagram of the air intake for a stock vehicle. Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

The Larger City Libraries carry the Haynes and Chilton Repair Manuals so you could go that route instead of Buying one for 25.00 and they will give you the Exploded view so that you can get this Info. Please Rate my Response, I need all the Help That I can Get! Thanks!

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1994 5-speed manual Pathfinder sputters and jerks when it's cold


Here are the common cause of surges, stalls at stops, slow idle speed, erratic idle, it is in most cases the idle speed control air-bypass valve and/or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving

Mar 22, 2014 | Nissan Pathfinder Cars & Trucks

Tip

Tips for operating Air conditioning system on Toyota Hilux and someother...


To cool off your Toyota after it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.

Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).

On humid, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.

Keep the area under the front seats clear to allow air to circulate throughout the vehicle.

On cold days, set the fan speed to high for a minute to help clear the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.

When driving on dusty roads, close all windows. If dust thrown up b the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the in intake be set to FRESH and the fan speed to any setting except "OFF".

If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.

HEATING

For best results, set controls to;
Fan speed ---- Any setting except "OFF"
Temperature----Towards WARM (red zone)
Air intake ---- FRESH (outside air)
Air flow ---- FLOOR
Air conditioning ---- OFF

For quick heating, select recirculated air for a few minutes. To keep the windows from fogging, select fresh after the vehicle has been warmed.

Press the "A/C" button on for dehumidified heating.

Choose floor/windshield air flow to heat the voltage interior while defrosting or defogging the windshield.

AIR CONDITIONING

For best results, set controls to;

Fan speed --- Any setting except 'OFF"
Temperature --- Towards COLD (blue zone)
Air intake --- (outside air)
Air flow --- PANEL
Air conditioning --- ON

For quick cooling, move the air intake selector to recirculate for a few minutes.

VENTILATION

For best results, set controls to;

Fan speed --- Any setting except 'OFF"
Temperature --- Towards COLD (blue zone)
Air intake --- (outside air)
Air flow --- PANEL
Air conditioning --- ON

DEFOGGING

The inside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone) to heat; COLD (blue zone) to cool
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- ON

The outside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone)
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- OFF

On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.

DEFROSTING

The outside of the windshield

For best results, set controls to:

Fan speed --- Any setting except 'OFF"
Temperature --- Towards WARM (red zone)
Air intake --- FRESH (outside air)
Air flow --- WINDSHIELD
Air conditioning --- OFF

To heat the vehicle interior while defrosting the windshield, choose floor/windshield air flow.

on Feb 14, 2011 | Toyota Pickup Cars & Trucks

1 Answer

My civic runs stupid


Check the code on the onboard diagnostic unit. You can do this with a paper cli. Locate the connector by googling it, short out the correct terminal and the codes will flash on the instrument panel. then go form there. The check engine light means just that. Autozone will hook up and read the codes for you for free. Sounds like a fault o2 sensor to me though....

Feb 15, 2013 | 1992 Honda Civic

1 Answer

My 1999 tacoma i bought has a cold air intake and its throwing a check engine light but it drives fine??? Help


drive it on over to oriellys auto parts and ask them to use thier scan tool (most parts stores can do this for you) itll tell you what part is causing the code to be thrown. however 9 times out of 10 when you have a check engine light on and the car still drives fine its the O2 sensor. on a side note most cold air intakes are a gimmick. most vehicles come stock with cold air intake from the factory. the issue ive noticed most with cold air intakes that use oil is they get over oilled and this cloggs up the IAC valve, TPS sensor, and throttle body.

Mar 13, 2012 | 1999 Toyota Tacoma PreRunner

1 Answer

2009 Civic LX hesitates with CAI


Put the stock parts back on, dont waste your time and money.

Nov 09, 2009 | 2005 Honda Civic

1 Answer

Civic Cold air intake question


a cheap one is the same as any high dollar one. as long as it fits your good

Oct 30, 2009 | 2003 Honda Civic

2 Answers

It kills when you remove your foot from the accelator fast


Here are the common cause of surges, cold stalls, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Oct 05, 2009 | 2003 Mazda MPV

1 Answer

At idle engine surge's up and down usually a few hundred RPM's


DS THIS PROCEDURE
Here are some of the causes of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

May 04, 2009 | 1998 Honda Civic

1 Answer

1989 EscortTac shows surges in RPM, but engine does not race up.


How many miles, has the timing belt ever been changed? (60,000-70,000 miles) when the belt gets near or over it's recommended change mileage it will get loose and cause the engine to run like it has a miss, mostly when cold, also u may need to do the following procedure, Escorts need this more than most other Ford cars
Here is the most common cause of surges and stalls and low idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Jan 16, 2009 | 1989 Ford Escort

1 Answer

99 Grand Marquis won't stay started when engine cold.


Here is the most common cause of this stall, it is the idle speed control air-bypass valve and throttle valve, they get full of gunk over the miles and cause idle issues (stalls) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake

Oct 29, 2008 | 1999 Mercury Grand Marquis

Not finding what you are looking for?
2003 Honda Civic Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...