Question about 2000 Ford Ranger SuperCab

1 Answer

I have a 2005 Ford 250 with remote start and keyless entry. All of the functions have stopped working. The status LED on the collum no longer flashes. Have checked the battery and it is good. Pushing

This remote start is a Ford installed unit. It also has the starter interupt feature.

Posted by on

  • Glen Fowler
    Glen Fowler Jan 23, 2013

    I have been through the manual for the remote start and the vehicle manual. Neither of these clearly identify which relay and/or fuse the circuit is hooked to. Are there any ideas where to get a wiring diagram?

  • Vitally Alcher Jan 24, 2013

    http://www.motorcraftservice.com/pubs/co...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Ford Master
  • 1,632 Answers

First check the fuses and relays .Clean the door contacts to body .

Posted on Jan 23, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 76 Answers

SOURCE: 2002 Ford Taurus keyless entry

if it was factory installed theres usually a fuse in the fuse panel whereever that may be...replace the fuse with the same voltage as the other one says. but if the fuse isn't in the fuse panel its most likely under the hood, to the right...hope this helps. =)

Posted on Oct 23, 2008

  • 200 Answers

SOURCE: how to install a remote car starter

The remote start should come with instructions, you will need these especially for the diagram of the units wiring harness.  It will need to be wired into the ignition key on wire, the ignition starter wire, power and ground, and usually the brake light wire, and a hoodpin disable switch that will come with the unit.  Also most manufactures will have a website with vehicle specific details like color and location of each wire on the vehicle.  hope this helps.

Posted on Oct 30, 2008

  • 191 Answers

SOURCE: Won't start

Check the battery cables make sure they are clean and tight. Make sure the battery has at least 12V, new batteries sit on the shelf for months sometimes before they are purchased. If this yields no results, remove the starter and have it checked. If it checks bad, replace the starter.

Posted on May 16, 2009

  • 200 Answers

SOURCE: my keyless entry remote was working and all of a

Do you mean the remote fob or the key pad on the side of the car. Fob could be batteries.

Posted on Feb 05, 2010

  • 11 Answers

SOURCE: ford 2000 excursion keyless entry not working

look online or go to the dealer and find a reprogramming procedure.

Posted on Mar 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the Ford 2010 Ford Explorer "Remote Keyless Entry (RKE) module" located


The RKE is controlled by the SJB - smart junction box ! Fords BCM - body control module .
Principles of Operation
Power Locks
The SJB controls the power lock/unlock feature of all of the vehicle doors, including the liftgate, to lock or unlock based on the input received from the door lock control switch, the keyless entry keypad or the remote keyless entry (RKE) transmitter. Power locking and unlocking of the doors function independently of the key position, vehicle speed or transmission position. The smart junction box (SJB) activates internal relays to supply the correct voltage and grounds for the door lock actuators.

Your best bet would be to take to ford dealer or some other qualified repair shop .
Remote Keyless Entry (RKE) Transmitter Lock/Unlock Control - Unlock
The RKE transmitter feature provides lock/unlock functions independently of key position, vehicle speed, or transmission position. The RKE transmitter feature provides a 2-step process for unlocking the doors. Upon receipt of the first request for unlocking the doors, the RKE control feature requests the SJB to unlock the driver door only. If another unlock request is received within 3 seconds of the first, the RKE transmitter feature requests the SJB to unlock all the doors. This feature can be changed to global unlock, so that all the doors unlock on the first press of the unlock button. To toggle between the 2-step unlock and the global unlock press the lock and the unlock button on the RKE transmitter at the same time and hold the buttons for 4 seconds. The turn signal lamps flash to confirm that the feature has been toggled.
Remote Keyless Entry (RKE) Transmitter Lock/Unlock Control - Lock
The RKE transmitter feature requests that all the doors be locked when the lock button is pressed. On any press of the lock button with all doors closed, the SJB provides 1 flash of the parking lamps. If any door is ajar, no flash occurs. As soon as the last door is closed, the SJB provides the flash of the parking lamps. If 2 presses of the lock button are received within 3 seconds, the horn chirps once, and the parking lamps flash twice to indicate that all the doors are closed and locked. If any door is ajar when the second lock request is received within 3 seconds of the first, the RKE transmitter feature requests the SJB chirp the horn twice without flashing the parking lamps to indicate it locked all the doors but 1 or more doors are ajar. When the key is in the ON or START position, the parking lamp flashes and horn chirp confirmations do not occur.

All locks not working ?????
  • The doors do not lock/unlock using the remote keyless entry (RKE) transmitter
  • RKE transmitter battery
  • RKE transmitter
  • RKE transmitter programming
  • Aftermarket system
  • SJB
  • Go To Pinpoint Test H .

Apr 16, 2017 | Ford Cars & Trucks

2 Answers

Changed battery in keyless remote and now doesn't start car or open doors


  • HOW TO - Change the battery and quick fix your car remote ...

    ? 9:32
    https://www.youtube.com/watch?v=KzCXGXCe0oc
    Sep 1, 2011 - Uploaded by tyreeztt
    Also if your remote isn't working with a new battery please check out this ... TO - Change the battery and quick fix your car remote / keyless entry ...

    Remote Key does not lock / unlock doors after battery change ...

    www.6speedonline.com/.../208274-remote-key-does-not-lock-unlock-do...
    Apr 17, 2010 - After I changed the battery, it would no longer lock / unlock the doors. ... I can start the call and all .. its just the door and trunk lock / unlock function that does not seem to work . ... now your fob is learned... the keyless entry goes into a "sleep" mode to preserve the batt.. if u do not use the ... Still don't work .

    how do i reprogram my lock remote to my car? i changed my ...

    www.cargurus.com > Questions > Hyundai > Tiburon

    CarGurusAug 17, 2009 - i change my battery an now my lock an un lock buttons dont work on my remote how o i reprogram it? ... I have a Hyundai 2003 Tiburon, and the followingworked for me, get ... However for a replacement keyless remote fob, you will have to go to ... And no, they don't do it for free (ranges from $30-$50 in my ...

    Top 5 Tips in Fixing a Keyless Remote ' eBay

    www.ebay.com > ... > Safety & Security > Keyless Entry Remote / Fob
    Key fobs that don't permit entry can be a major hassle for drivers, but fortunately, there... Drivers with a bit of basic electronics experience are often able to replace their ...After confirming that a remote is faulty, try replacing its battery. ... like "Jeep Wranglerkeyless remote," to find listings that will work with specific vehicles.

Jan 26, 2016 | 2005 Ford Freestyle

1 Answer

How do i find out if vehicle has remote start feature ? all functions on key fob work except engine crank even park lights flash indicating remote start feature . maybe a fuse blown or not in place.


How to check if your GM car is equipped with factory keyless ...

blog.remotesandkeys.com/.../How-to-check-if-your-GM-car-is-equipped...
Aug 25, 2011 - Many, but not all GM vehicles, are equipped with factory keyless entry. ... If not, and you want to have remote keyless entry, go to an alarm shop or Best .... Your other option is to locate the aftermarket receiver under the dash and ... start but need programmed or how can i check if i have remote start installed.

Remote Start ' Vehicle Features ' Official Ford Owner Site

owner.ford.com/.../vehicle-features/.../remote-start-...

Ford Motor CompanyIf your vehicle has automatic climate control, you can configure it to begin operating when you remote start your vehicle. A manual climate control system will run ...

Factory Remote Start Installed? - Chevrolet Forum - Chevy ..


Jan 14, 2016 | Cars & Trucks

1 Answer

2005 ford escape keyless entry - are the park lights and tail lights supposed to flash upon unlocking vehicle with keyless entry


Yes, this is a normal occurrence for the 2005 Ford Escape.

Please rate this answer! Thanks!

Jun 10, 2011 | 2005 Ford Escape

1 Answer

How can I tell if I can use a remote with my 2005 Ford F-250?


Look under the hood in the fuse boxes for the one that says keyless entry or remote. If there is a fuse there then most likely u just need a replacement remote.:-)

Dec 14, 2010 | 2005 Ford F 250 Super Duty

1 Answer

Keyless remote stopped working, I replaced battery


The 1997 to 2003 Dodge Caravan and Grand Caravan use a standard key and remote setup with a separate remote fob. However, the 2004 to 2009 Dodge Caravan and Grand Caravan use a combination key and remote on one device. To program a new keyless entry remote for the 1997 to 2003 Dodge Caravan, you must have at least one functional remote, which is required to enter synchronization mode. To program the combination key for the 2004 to 2009 Dodge Caravan, you must have two functional combination keys. If you do not, you'll need to see an authorized Dodge dealer for keyless entry programming assistance.


2004 to 2009 Caravan Programming Instructions
  1. Insert one of your working combination keys into the ignition. Turn it to "On"; leave it in this position for about 10 seconds but no longer than 15 seconds. Turn it to "Off" and remove it.
  2. Insert your second working combination key into the ignition within 15 seconds of removing the previous key. Turn it to "On". After 10 seconds, you'll hear a chime and the "Theft" light will begin to flash, entering synchronization mode. Turn the key to "Off" and remove it.
  3. Insert the combination key you want to program. Turn it to "On." After 10 seconds, you'll hear a chime; then the "Theft" light will turn off. When the light turns off, the combination key--including the key and the remote--is programmed.
  4. Repeat Step Three for each combination key you want to program. A total of eight can be programmed.
Hope this help (remember comment and rated).


May 08, 2010 | 2008 Dodge Grand Caravan

1 Answer

My keyless entry remote was working and all of a


Do you mean the remote fob or the key pad on the side of the car. Fob could be batteries.

Feb 05, 2010 | 2005 Ford Expedition

1 Answer

Keyless entry has stopped working. Battery is replaced but still no remote operation of the doors or trunk.


The keyless entry matches to the module for it that is mounted under the dash. It may have gone bad since your remote will not function. Of course it could be your remote as well that went bad

Jan 20, 2010 | 2001 Ford Taurus

1 Answer

Ford 2000 Taurus, Keyless entry remote no longer works. Changed battery no luck. Tried reprograming and found door locks did not cycle open closed. Could not go further. Any ideas? Thanks, Al


I have a 2000 ford Taurus and my keyless remote has stopped working and having problems with key unlocking the door from outside, none of the remote work do u have any idea what my problem could be ?

Jul 30, 2009 | Ford Taurus Cars & Trucks

1 Answer

Keyless Remote Entry Doesn't Work


Hi, Had similar problem and replaced the key fob battery, which was a waste of money because the faulty item was my "door lock actuator".  Had it replaced at a Maryland repair shop for around $180, Honda dealer wanted over $250. Good luck :)

May 29, 2009 | 2003 Honda Accord

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...