Question about Cars & Trucks

2 Answers

I just replaced the actuator on my 2000 Chrysler Concorde LXI and my heater still isn't working. Any other idea's?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Cars & Trucks Master
  • 1,632 Answers

Check both of the 2 of the 20 amp fuses , for blower . Also check the switch in all positions ., fast slow etc.

Posted on Jan 23, 2013

  • Tiffany Jan 23, 2013

    all that works...it just seems that the sensor isn't turning to heat.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 23 Answers

If its not blowing air then you may want to try a new blower motor if it is blowing air then you probably need a new thermostat

Posted on Jan 23, 2013

  • Tiffany Jan 23, 2013

    it is blowing air. and the thermostat is working propertly on it.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

motor1258
  • 6674 Answers

SOURCE: heater stopped working in a 1999 chrysler concorde lxi

Check all fuses first

Posted on Jan 16, 2009

  • 1 Answer

SOURCE: I cannot get the alarm to reset on my 1998

using your key u can bypass the alarm by locking or unlocking your door or u can remove the fuse

Posted on Dec 29, 2009

lindsay836
  • 677 Answers

SOURCE: how do i open the hood on a 2000 chrysler concorde

You must go through the front grill. If you cant do that try under the front of the car so you can reach the latch

Posted on Feb 02, 2010

  • 310 Answers

SOURCE: replacing the crankshaft an camshaft position sensors

they are behind the cam shaft gears you have to remove then and put the car back in time you might want to go down and get a book to show you timing marks

Posted on Feb 11, 2010

  • 373 Answers

SOURCE: 2001 Chrysler Concorde LXI randomly stalling while

Check the fuel filter on car for a restriction. Check the air filter for a restriction(dirty). also check the IAC valve (idle/air/control) located on the side of the throttle body. To check the iac valve, start the engine and disconnect the electrical plug from the iac. Listen for a change in the idle of the engine. then reconnect the plug to the iac valve and turn on the a/c and listen for the engine idle speed to change. If not then replace the iac valve. Hope this will help you.

Posted on May 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chrysler concorde lxi 3.2l started with timing belt unaligned


Or worse, if it has bent valves, so yes do check compression. That is an interference engine design.

Mar 17, 2014 | 2000 Chrysler Concorde

1 Answer

My 2000 chrysler concorde alternator isn't


The computer controls alternator output. If the alternator passes a bench test but is not charging at idle speed on the car, it could be the computer or a bad connection in the harness.

Jan 10, 2013 | Cars & Trucks

1 Answer

I have a 2000 LxI Chrysler Cirrus, 6 Cyl. and can't find the air conditioner drain hose. Where is it?


Should be in the bottom of the heater box and drain to the outside of vehicle.

Aug 31, 2012 | 2000 Chrysler Cirrus

1 Answer

Just replaced the brake booster on Chrysler Concorde LXI now brake lights won't turn off. Any ideas how to fix? Please?


The rod that connects to the brake pedal arm is shorter than the original, or the return spring on the brake pedal arm is broken or disconnected. What all this means is the arm is not coming back up to where it used to and is not contacting the brake light switch. Look up under there and re-adjust the switch, or the spring.

Aug 27, 2011 | 1998 Chrysler Concorde

1 Answer

My 2000 chystler Concorde lxi air condition condencer smoked and leaves a smelly residue


You need to have the system evacuated,replace condenser, and recharged. Unfortunately they are susceptible to rocks flipping up and puncturing the condenser.

Jul 19, 2011 | 2000 Chrysler Concorde

1 Answer

1997 Chrysler Concorde LXI. Radio works its just


Try disconnecting the battery for five minutes and then reconnect. This may reset the memory in the radio.

Sep 16, 2010 | 1997 Chrysler Concorde

1 Answer

Replacing the crankshaft an camshaft position sensors an also where they are located on a 2000 chrysler concorde lxi 3.2 lit eng


they are behind the cam shaft gears you have to remove then and put the car back in time you might want to go down and get a book to show you timing marks

Feb 11, 2010 | 2000 Chrysler Concorde

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...