Question about Cars & Trucks

1 Answer

How do you take out the factory radio in a 1992 Chevy suburban? trying to put in a new one, but taking out the old one is a HUGE issue!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Cars & Trucks Expert
  • 284 Answers

No it's not. On the faceplate of the radio, there are 2-screws at the top of the plate. remove the screws and plate will comeout. You will see 2-nuts/bolts either on the side or at the top. Take them out. Pull radio back towards the seat to unveil the antenna wire and the 3-pluggins on the back of the radio. The antenna cable will pull out hard but pull it out, The blue, white and black plug-ins come out by pressing a flat tab on each one while pulling them out, Radio should slide out with ease,

Posted on Jan 23, 2013

  • brandycooks
    brandycooks Jan 23, 2013

    but where does the stock stereo and cassette player plug in/connect behind the dash??

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: 2004 chevy truck factory radio needs to be cleaned on the inside

Read the car manual, in the page were it shows the dashboard fuse panel find the radio fuse pull it out and put it back in with the fuse tool. This resets your radio, it did the trick for me with.
Just make sure if you disable the radio security lock if it enabled before you pull the fuse. It may lock you out, all the information is in the manual.
Good luck and hope this helps.

Posted on May 27, 2009

  • 17 Answers

SOURCE: 1992 chevy suburban wont start with key no power t...

main fuse under the hood

Posted on Jan 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I tried to replace my "volume/power" button on my 2004 Chevy Suburban but now it won't turn on. Any ideas? I got the replacement button from the dealership but they don't know what to do. If I coul


did you disconnect the radio to fit the button. if so you will need the radio code.
the button is a press on button the by pressing it on, you switch of the power . press again and the power comes on .turning the button gives volume

Feb 11, 2015 | 2004 Chevrolet Suburban

1 Answer

How to reset factory alarm in 1997 Chevy Suburban without a keyfob


to disarm the factory alarm try unlocking driver door with the key. does it blow the horn or does it have a siren?

Jan 25, 2014 | 1997 Chevrolet Suburban

1 Answer

What's a good after market radio for a 2005 impala


there are 100's of replacement radios for vehicles, what you need to keep in mind is,,, if your factory radio has the vehicle info on the radio screen, its connected to the computer and all that goes along with it, I have an 02 Malibu, and had a new radio installed, But they had to route wiring to the trunk, ( thats where they put the factory radio and wired it in ) so that all my factory functions still worked, I was a little displeased with Chevy for having this attached to a radio, and since the CD player stopped working in the original, I was able to purchase a new radio, amp , and have it and the old one installed , rewired, and it still cost me less than Chevy wanted for a replacement of the old radio, Just due to the CD not working, so be sure and check around when looking for a replacement,

Sep 27, 2011 | 2005 Chevrolet Impala

1 Answer

Hello, I have a 94 chevy suburban, and a mechanic in another state put another radio in the truck, later I found out, my cigaret lighter stopped working, which did work before this, the I looked for the...


The mechanic probably used the wire from the lighter for the memory on your new radio if you can find the memory wire on the radio run a jumper wire from that back to the lighter

Aug 14, 2011 | 2003 Chevrolet Suburban 1500

1 Answer

2005 Chevy Suburban I can't seem to keep brake rotors on front from warping. As soon as we put on new rotors within 100 miles they are warped again. I can't find anyone that knows why. I put on the best...


The hub faces sound like the need to be machined or replaced (whatever is cheaper). The caliper might be seized and causing a huge drag on one side, but it sounds more like the hub/carrier face needs attention.

Hope this helps, please vote for me if you agree.

Jun 24, 2010 | 2005 Chevrolet Suburban

1 Answer

I have a 1998 Chevy Suburban 1500. I recently


if your actuator is brand new i would just take it back cause some times even the brand new ones arent in good working order

Dec 31, 2009 | 1998 Chevrolet Suburban

2 Answers

Replacing factory radio


Buy adapter harness from stereo shop simplifies problem and keeps factory harne in tack.

Jun 19, 2009 | 1999 Chevrolet Suburban

1 Answer

1992 chevy suburban 7.4 454 THM 700 tranny problems!


Try and adjust the down shift cable..Sounds like either it is broke or out of adjustment..

Apr 05, 2009 | 1992 Chevrolet Suburban

1 Answer

2004 Chevy Trailblazer radio and CD player works, but no sound


if you have installed a new cd player in there then the propblem could be that your speaker wires and either touching each other or grounding them selfs out.. pull of the cd player and check to make sure all the speaker wires are covered properly and no bare wires are exposed.. if you still have a factory cd player in it then you will probably need to take it to a dealership to have it checked out..

Feb 18, 2009 | 2001 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...