Question about 1996 Nissan Altima

Open Question

Nissan Altima wiring diagram for starter to alternator

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ilragatzzo78
  • 241 Answers

SOURCE: Replacing a starter for a 1999 Altima

  1. Disconnect battery ground cable.
  2. Disconnect starter wiring from starter.
  3. Remove starter retaining bolts and the starter.
  4. Reverse procedure to install.
the bolts should be on the drivers side.
you will have to crawl underneath the car to do this task

Posted on May 15, 2008

pal03246
  • 705 Answers

SOURCE: Need an ecu wiring diagram

what is the car doing?? by you saing "need a ECM diagram?" what is the problem with the car. that car is pretty bulletproof and I have't seen any ECM issues unless your A/C drain is clogged up and water leaked onto/into your ECM frying it up. Let me know what your symptoms are.

Posted on Sep 01, 2008

  • 41 Answers

SOURCE: How do I remove a starter off a 1998 nissan Altima?

need an engine size

Posted on Jan 29, 2009

ZJLimited
  • 17970 Answers

SOURCE: Howm do I replace a starter on a 1995 Nissan

Nissan 240SX/Altima 1993-1998 Repair Guide

Altima
(see Figures 1, 2 and 3)


ef972ea.jpg
Fig. 1: The starter is located to the left of the oil filter housing on the engine block


dfca7b3.jpg
Fig. 2: The starter motor is removed from the bottom side of the engine compartment


04c206e.jpg
Fig. 3: When installing, be sure to align the starter's mounting bolt holes with those in the engine block

  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle safely.
  3. Remove the starter support bracket, as required.
  4. Label and disconnect the starter electrical harness.
  5. Support the starter from beneath the vehicle using a jackstand.
  6. Remove the starter mounting bolts.
  7. Carefully lower the starter from the vehicle.
To install:
  1. Position the starter on the engine and support it using a jackstand.
  2. Install the starter mounting bolts and tighten to 30-37 ft. lbs. (40-50 Nm).
  3. Connect the starter electrical harness.
  4. Install the starter support bracket, as required.
  5. Lower the vehicle.
  6. Connect the negative battery cable.

Hope helped with this (remember rated this help) Good luck.

Posted on Nov 27, 2009

alicantecoli
  • 22095 Answers

SOURCE: NISSAN VANETTE CARGO DELIVERY 2.3 D LD23

two wires ,feed to the B+ and the other to the small terminal

Posted on Dec 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wire color position for 2002 Nissan Altima window switch


Hello John Lom,

BBB Industries
has your interior wiring, windows circuit drawing for your 2002 Altima... (More wires than I imagined).

Free... (registration required)

BBB Industries Premium Alternators Starters Power Steering Products

Oct 19, 2016 | Nissan Cars & Trucks

1 Answer

Wire color position for 2002 Nissan Altima window switch


Normally I recommend anyone serious about working on their VEHICLES purchase the FACTORY+WORKSHOP+MANUAL.

Luckily you will find BBB Industries has your circuit drawings ... wire colors and numbered tabs... to assist in-screwing what ever is BROKEN NOW...

You have "auto" up/down and the DRIVERS DOOR get a little less use than the SAFEWAY STORES front door...

Go to bbbind.com... wade thru the registry... go to their wiring and technical service bulletins...

Re-check that you are in "WIRING DIAGRAMS"...
"BODY & Accessories" and go to "POWER WINDOWS".. you are there...
BBB Industries Premium Alternators Starters Power Steering Products

I'm good with all the "color" letters but "L"
(I'm guessing "lime" trace??)...

You tell me... Hope this helps!!

Oct 19, 2016 | 2002 Nissan Altima

1 Answer

2007 Nissan Altima Stereo Wiring Diagram for Bose Navigation


None are actually color coded. The schematic has the wire colors on it next to the wire.

May 01, 2014 | 2007 Nissan Altima 3.5 Sedan

1 Answer

Nissan Altama Starter Relay electrical problems or a fuse?


Or the battery cables ! Do you know how to use a voltmeter ?
Starter Voltage Drop
Do you know how to do basic automotive electrical testing ?
How to voltage drop test starter motor circuit
Electric Testing Techniques You Need to Know Here is a place to view wiring diagrams ! http://www.bbbind.com/free_tsb.html


Apr 08, 2017 | 2004 Nissan Altima

1 Answer

Where is the starter located on my 93 altima


To get to the starter, you'll want to put the car on jacks or a lift. It is located on the back side of the engine, under the intake and seated in the cavity beside the transmission. Once under, you will see the starter and solenoid, along with wiring connections.

Removal is a little tricky with the nearly hidden upper bolt but once removed, slide it towards the belt system on the engine and it should drop out. You may need to rotate it a bit to fit it out of the bay. Installation is opposite of removal, so be sure to mark your wiring if you don't have a diagram handy.

May 19, 2010 | 1993 Nissan Altima

1 Answer

My 97 nissan altima will not start and all the lights and alternator and battery is ok. It is a standard can push start by popping the clutch.


it is possible that the starter or solenoid for the starter is bad u will most likely end up needing an entire starter though. the least likely cause is bad electrical connection at the starter

May 02, 2009 | 2002 Nissan Altima

1 Answer

1998 Nissan Altima


If the starter/solenoid is new/replaced, most likely the cable from the battery to the solenoid needs replacing or the connection ends saned and cleaned for a good electrical contact, Also chek the gound wire connections (if any)

Aug 23, 2008 | 1998 Nissan Altima

1 Answer

Nissan Altima 98


The starter solenoid (must buy complete starter) -or-
The cable from the battery to the solenoid needs replacing or the connections need cleaning
If you are handy, the starter can be rmoved without too much work and exchanged for a rebuilt/remanufactured one

Aug 23, 2008 | 1998 Nissan Altima

1 Answer

1998 Nissian Altima Not starting


Nothing by either party was said about the starter. The battery and wires can all be in great shape, and if they are and the owner hears a clicking noise when trying to start it its a pretty good bet they may have a starter that's locked up.


One good 'ole trick on those starters. If you can reach the starter, a couple of sharp rapes with a hammer will have it starting again, then you know it time to replace the starter.
Bill

Aug 23, 2008 | 1998 Nissan Altima

Not finding what you are looking for?
1996 Nissan Altima Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...