Question about Cars & Trucks

1 Answer

I have a 93 buick regal but my front doors & rear

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 21,873 Answers

Well, the mirrors would be on the circuit with the courtesy lights. The door locks and windows would be on different circuits.
Why can't you unlock the driver's or passenger door with the key and open it with the door handle ?

Posted on Jan 23, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: replace the rear view mirror

Gently tap the base of the mount upwards. I just replaced mine and I thought there was a cover over the winshield mount, turns out it is just pushed on to the wedge that is mounted to the windshield. Good Luck, webree

Posted on Nov 10, 2008

emissionwiz
  • 75807 Answers

SOURCE: How do you remove interior rear view mirror on 1998 Buick Regal

It is held on by a spring tension clip, use a jewlers screwdriver to release it.

Posted on Nov 14, 2008

StormStrikes
  • 104 Answers

SOURCE: how to replace a crank sensor on a 93 buick regal 3.8L engine

Im assuming this is the Series I 3800? If so, if you can email me I can send you some directions on the process. Its for a Series II 3800 but it should be similar. If you cant email me, post up and I'll see what I can do.

Posted on Dec 30, 2008

  • 1 Answer

SOURCE: 2000 Buick Regal rear view

I had the same problem. My mirror has map lights so I disconnected the wiring harness from the mirror. I had trouble getting this done, but there is a small clip you must pull back to release the wiring. Once I had the mirror free the button that you must glue back on the windshield is attached to the mirror by a strong metal spring clip. I placed a screw driver under the button and popped it out of the clip. Make sure you mark the outside of the windshield first before you clean off the old glue so you will know where to glue it back. I just placed a small piece of duct tape on the outside windshield. MAKE SURE YOU GLUE THE BUTTON ON CORRECTLY, so the mirror will slide back on. I let the new glue dry for several hours before I tired to re-attach the mirror. The directions said 15 minutes, but that is not long enough. I also sprayed the clip with some WD-40 so it would slide on the button easier.
Hope this helps

Posted on Sep 08, 2009

  • 21 Answers

SOURCE: 1996 Buick Regal internal rear view mirror fell off.

You will have to pry up on the small cover that keeps the mirror on the piece that actually touches he windshield. The trick for me is now how to get the piece back on! Small sledge hammer and a block of wood might just do the trick! :-) Be gentle!

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the 1995 buick regal rear view mirror from the plate


If you mean the windshield, there should be a small set screw in the center of the base holding the mirror to the plate.

Sep 11, 2014 | 1995 Buick Regal

1 Answer

93 BUICK both front doors not opening from outside but do work from the inside


Don't know if this is aplicable , but I just had this problem with a 2002 dodge . it was ice build up on the bottom of the door .

Feb 20, 2014 | 1995 Buick Regal

1 Answer

How do i remove the door panel on a 1998 buick regal front driver side.


  • In the door handle "finger well" remove the plastic cover with a screw driver.
  • Remove 2 screws (they may be torx or regular hex bolts).
  • Remove Philips screw from behind the inside door opener lever.
  • slightly and slowly, pull back on the plastic triangle that is on the back side of the outside rear view mirror. It will stay attached to the door panel, but you need to release the catch nipple from the door.
  • Now, pull out on the edges all around the bottom, front, and back of the door panel ( you may need a putty knife or something similar to get your fingers in and start pulling).
  • once the door is loose, lift up slowly on the door panel until it is free of the door (don't pull too hard or far as there are still 3 wire bundles attached).
  • Unclip the door light plug on the back and the locks and windows switch plugs towards the front.
  • Reverse for install.

Dec 29, 2013 | 1998 Buick Regal

1 Answer

I need to replace my rear view mirror for my Mercedes Benz 1998 c230


if rear view mirror base plate fell off with the rear view mirror. you can go to auto parts store buy rear view mirror repair kit.

Jun 02, 2013 | 1988 Buick Regal

1 Answer

On a 2002 buic regal rear view mirror how do you take it off the windshild mine has a short the interor light won't stay on when I open the door sometimes it will work and sometimes it won't, if I move...


Unplug the wire from the back of the mirror. You will find a small jam screw on the mirror base that is attached to the windshield glass mounting plate. Loosen the screw and lift the mirror up and off.
Good luck.

Feb 13, 2011 | 2002 Buick Regal

1 Answer

How to replace rear view mirror that has fallen off on a 1995 Buick Regal


Go to a part store and ask for rear view mirror adhesive. And follow the directions on the package. I have the best luck with the permatex brand.

Oct 13, 2010 | 1995 Buick Regal

1 Answer

Need a diagram for installing a drivers side electric power mirror on a 1995 mercury villager van


here's 1996, all I have. Please rate.

Mirror, Power — Outside Rear View NOTE: This procedure applies to both RH and LH power outside rear view mirrors.

Removal
  1. Remove the front door trim panel (23942). Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws and the outside rear view mirror mounting hole cover (17K709) from the front door (20124).




  1. Remove the wire clip.
  1. Disconnect the power outside rear view mirror electrical connector.




  1. Remove the three power outside rear view mirror bolts and the power outside rear view mirror.




Installation
To install, reverse the removal procedure. Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in). Glass, Outside Mirror
Removal and Installation
Refer to the glass replacement procedures in Manual Mirror for power outside rear view mirror glass (17K707) Trim Cover
Removal
  1. Remove the front door trim panel. Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws.


    Remove the outside rear view mirror mounting hole cover.
Installation
To install, reverse the removal procedure. Mirror Control
Removal
  1. Use a small flat-blade screwdriver to pry the power outside rear view mirror control switch from the instrument panel (04320).


May 13, 2010 | 1995 Mercury Villager

1 Answer

93 buick regal courtesy lights stay on when car is off


One of your door sensors (or trunk sensor) is signaling that it is open or the dimmer switch is turned all the way up, which turns on the dome and foot lamps. Try turning the dimmer switch all the way down. If this does not fix the problem you will have to get all the door sensors (and trunk sensor) tested to determine which one needs to be replaced.

Mar 15, 2010 | Buick Regal Cars & Trucks

2 Answers

How do you remove interior rear view mirror on 1998 Buick Regal


It is held on by a spring tension clip, use a jewlers screwdriver to release it.

Nov 14, 2008 | 1988 Buick Regal

5 Answers

Power windows and Power side mirrors Will not work.


i have had this issue before all i had to do is do a new ground, jumped the safety window lock, as well as expanding the metal clips in the wire con.

Aug 23, 2008 | 1999 Buick Regal

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...