Question about 2004 Dodge Stratus

Open Question

2004 DODGE STRATUS 2.4L serpentine belt diagram

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: serpentine belt diagram:

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

Posted on Jul 18, 2008

Ad
BCally1
  • 133 Answers

SOURCE: serpentine belt diagram for a 5.9 diesel with air and 9 pulleys

5.9L DIESEL
196759.jpg The 5.9L diesel engine accessory drive system (with a/c) consists of :

  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
  8. A/C Compressor Pump Pulley (8)
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley. 2. Attach a 1/2 inch ratchet to tensioner.


196757.jpg The 5.9L diesel engine accessory drive system (without a/c) consists of :
  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
3. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.

Posted on Jan 22, 2009

  • 66 Answers

SOURCE: Need diagram to install serpentine belt on 2004

There should be a diagram under the hood on the fan shroud or radiator support. If not, let me know and I see if I can find one. For the most part, if the pulleys it rides on are grooved, the belt ribs ride on it, it the pulley is smooth, the back side rides on it. From a picture of the alternator I have, from the passenger side coming up, over the alternator, then down and under the belt tensioner (smooth pulley), then up and over A/C compressor, then down and around P/S pump, up and around water pump, down around crankshaft pulley.

Posted on Jun 03, 2009

  • 3 Answers

SOURCE: replacing serpentine belt 2002 dodge stratus

Did this on my 2002 Stratus 2.4L. I agree with other poster, you do have to remove the passenger tire and wheel wall to do it, but the tensioner travels clockwise.
Note: I offer this solely as a description of how I accomplished the task on my vehicle. It should not be taken as me advising anyone else in any way on how or whether they manage to repair their own vehicles.

1) Engaged parking brake, loosened lugs on passenger front tire.
2) Jacked-up and placed jack-stand.
3) Removed piece of black under-carriage which surrounds the oil filter and attaches to front bumper. There are at least 10 plastic push-pins to remove and I managed to destroy half of them in the process.
4) Positoned belt over lower pulleys and tensioner (as best as possible) then used a bungee to hold the top end of belt up while I worked under the car.
5) Used a 3/8 ratchet and inserted into square hole attached to the tensioner, disengaged the tensioner (moves clockwise) then used a brace to keep the ratchet handle in that position.
6) From top, removed bungee and finished placing belt over alternator, checked the position of entire belt, reengaged the tensioner, and replaced wall and wheel.

Posted on Sep 01, 2009

digritz
  • 530 Answers

SOURCE: I need a serpentine belt diagram for adodge

Here's your belt diagram.
if it's not correct let me know and I'll get you all the routing diagram for that year ram 1500.
Hope it helps.
bfce879.jpg

Posted on Nov 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you apply serpentine belt on 2004 Dodge Stratus?


You need a tool to release the spring tension idler pulley to get the old belt off and the new one back on. The wrap diagram should be on a sticker under the hood somewhere. You can google search for a diagram.

Oct 01, 2016 | 2004 Dodge Stratus

1 Answer

Serpentine belt diagram or route 2006 dodge stratus


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Jan 25, 2012 | 2006 Dodge Stratus Sedan

1 Answer

How to replace timing belt on 2004 dodge stratus


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Jan 22, 2012 | 2004 Dodge Stratus

1 Answer

Timing belt broke on 2006 dodge stratus how do i set timing


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Jan 21, 2012 | 2006 Dodge Stratus

2 Answers

How to replace the serpentine belt on a 2004 dodge stratus


This cannot be answered with any detail because you did not bother to mention what engine your Stratus is equipped with. However, it basicly goes the same for ALL engines and ALL vehicles. Release or loosen the belt tensioner and remove the belt. Install new belt and check belt for proper tension.

Dec 11, 2011 | 2004 Dodge Stratus

2 Answers

Need to install serpentine belt for 2001 dodge stratus 3.o need a diagram


cd753c3.gifThis seems to be the two possible belt configurations for you Stratus

Apr 15, 2011 | 2001 Dodge Stratus

1 Answer

2004 dodge ram 3500 turbo diesel/ 6 pulleys/serpentine belt diagram


sorry nothing listed under either chrysler or dodge in my europeon alldata books

Oct 24, 2010 | 2001 Dodge Stratus

1 Answer

Diagram for serpentine belt for 2001 dodge stratus


Hi,


There would be 2 links you can refer :-

http://autorepair.about.com/library/weekly/aa071205b.htm

http://www.serpentinebeltdiagram.com/

These 2 links would help you to have an idea that would really help you to fix this.

Copy and paste the above links in browser and click enter.

Any further help, let me know.

Thanks for using "Fixya".

Jun 04, 2009 | 2001 Dodge Stratus

Not finding what you are looking for?
2004 Dodge Stratus Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...