Question about 1998 Nissan Altima
Change alt and has new battery but still showing not charge
Check the gauge isn't fautly it might have broke!!! or there might be a louse connection!
Posted on Jan 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just replaced the driver's side headlamp on my 2000 nissan altima. The manual advises you to take it to a dealer or details a long process which involves removing the bumper protector -- none of this is necessary. I am not mechanically inclined and a coworker and I did it on a lunch break. Here's how:
1) Disconnect the battery by loosening the nuts that attach both the positive & negative contacts.
2) Once loose, slide off the contacts. At the base of the battery (closest to front of the car) there will be another nut that you'll need to remove (this loosens a clip which holds the battery in place)
3) Once loosened, lift out the battery which will enable you to see the headlamp connection.
4) There is a white plastic ring that attaches to the headlamp connection. Twist this to the left (about a quarter turn).
5) Once you have loosened the white ring, you should be able to gently pull out the headlamp assembly.
6) Remove the headlamp from the socket by pushing on the plastic arm which will release the lamp from the socket (sounds confusing, but once you have the piece in your hand it will make sense)
7) Insert the new lamp into the socket & slide assembly back into the hole. Note. There is a groove in the assembly which will align with a notch in the headlamp frame...you can see this by looking through from the front of the headlight cover on the outside of the car.
8) Replace the white ring and twist to the right to secure in place.
9) Replace the battery & bolt you remove.
10) Replace the positive & negative connectors (hint: don't forget to replace the plastic battery cover before you attach the connectors).
Hope this helps...let me know how you make out.
Posted on Feb 05, 2009
SOURCE: 2002 nissan altima
On the left hand side by your left knee, there is a fuse box. Sound like for some reason , you blew a radio fuse. Remove cover, find fuse that sais RADIO and check it.
Posted on Jul 17, 2008
SOURCE: Nissan Altima 98
The starter solenoid (must buy complete starter) -or-
The cable from the battery to the solenoid needs replacing or the connections need cleaning
If you are handy, the starter can be rmoved without too much work and exchanged for a rebuilt/remanufactured one
Posted on Aug 26, 2008
SOURCE: 1998 Nissan Altima
If the starter/solenoid is new/replaced, most likely the cable from the battery to the solenoid needs replacing or the connection ends saned and cleaned for a good electrical contact, Also chek the gound wire connections (if any)
Posted on Aug 26, 2008
Tips for a great answer:
Aug 31, 2015 | 1998 Nissan Altima
May 15, 2010 | 1999 Nissan Altima
May 08, 2010 | 1994 Nissan Pathfinder
Apr 18, 2010 | 2005 Nissan Altima
Feb 23, 2010 | 2004 Jeep Grand Cherokee
Oct 27, 2009 | 2005 Nissan Altima
Jan 17, 2009 | 1996 Nissan Altima
Aug 23, 2008 | 1998 Nissan Altima
103 people viewed this question
Usually answered in minutes!