Question about 2001 Isuzu Trooper

Open Question

Front crankshaft pulley bolt,left or right thread

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
agent91
  • 2100 Answers

SOURCE: remove bolt front of crankshaft

Get a half inch breaker bar with socket on the bolt, lean it all the way to the right, put the handle up against something solid and hit the starter button one klik, should do it. Don't laugh, that is what the book says. It works, I've done it 3 times on my 2, 94 rodeos.

Posted on Jun 12, 2009

Ad
  • 850 Answers

SOURCE: to remove crankshaft harminic ballance lock bolt

anti clockwise when facing the engine !
Its will be very tight so fit a socket with a braker bar & rest it on the chassis rail the clck starter [on & offf quickly] but make sure it cxant hit anything else!!!
Cheers Rob

Posted on Jul 24, 2009

  • 167 Answers

SOURCE: crank shaft pulley

Should be a right hand thread . Only left hand threads I have come across are Honda's and some Mitsubishi's.
It will be very tight!
Hope this helps

Posted on Aug 01, 2009

  • 1011 Answers

SOURCE: changing the timing belt on

just real hard to get offf try jam flywheel and use longer bar

Posted on Sep 30, 2010

Testimonial: "do you kno if the threading is reverse thread on it or is it loosen to the left?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Crankshaft pulley bolt


just put the impact in revise and it will come off

Nov 04, 2012 | 1991 Honda Accord

1 Answer

I have a1993 Geo Storm, 1.6L engine, having problem getting the bolt on the crankshaft pulley loose. Is it a left hand thread or a right hand thread.


The crankshaft pulley bolt loosens by turning Counter-Clockwise. Ensure the pulley is secure from movement so that you can loosen the pulley bolt without turning over the engine. You may need to use breaker bar to loosen the pulley bolt, or at least a large wrench.

Mar 16, 2011 | 1993 Geo Storm

2 Answers

We r strugeling to remove the crankshaft pully and we now un shaw if its a left or right hand thread??


it is a regular thread but you almost need an impact wrench to remove bacause they put them on tight at the factory

Feb 14, 2011 | 1984 Jeep CJ7

1 Answer

Can't get the crank pulley loose. is it left our right threads. i am replacing the water pump.


TURN CRANKSHAFT BOLT COUNTERCLOCKWISE TO LOOSEN. YOU HAVE RIGHT HAND THREADS.ENGINE TURNING CLOCKWISE.YOU NEED A STRAP WRENCH HOLD CRANKSHAFT PULLEY WHILE LOOSEN IT.BUT YOU NEED A CRANKSHAFT DAMPER REMOVAL TOOL.OR HARMONIC BALANCER REMOVAL TOOL.YOU NEED STRAP WRENCH TO HOLD CRANKSHAFT PULLEY WHEN TIGHTEN IT.TORQUE CRANKSHAFT PULLEY BOLT 90 - 98 FT LBS. MAKE JOB EASIER.HAVE A HELPER HOLD STRAP WRENCH WHEN YOU LOOSEN OR TIGHTEN CRANKSHAFT PULLEY.

Sep 19, 2010 | 1995 Mercury Villager

1 Answer

Replace alternator


Remove or disconnect the following:
  • Negative battery cable
  • Right front wheel
  • Right fender splash shield
  • Accessory drive belt
NOTE The crankshaft pulley retainer has left-hand threads.

  • Crankshaft pulley
  • Alternator harness connectors
  • Alternator

eed945c.gif

Remove the crankshaft pulley to provide clearance—2002–04 3.0L


To install:
  1. Install or connect the following:
    • Alternator and tighten the fasteners to 18 ft. lbs. (25 Nm)
    • Alternator harness connectors
    NOTE The crankshaft pulley retainer has left-hand threads.

    • Crankshaft pulley and tighten to 74 ft. lbs. (100 Nm)
    • Accessory drive belt
    • Right fender splash shield
    • Right front wheel
    • Negative battery cable
  2. Start the engine and check for proper operation

May 12, 2010 | 2003 Ford Taurus

2 Answers

Daewoo Matiz crankshaft pulley


remove the outer small bolts to remove balancer(pulley) the big centre bolt holds crankshaft gear for timming belt which slides off with timming belt removed.

Sep 10, 2009 | Daewoo Nubira Cars & Trucks

1 Answer

Is the crankshaft pulley aright or left handed thread


The bolt in the middle is usually counterclockwise. Standard thread removal.

Feb 19, 2009 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
2001 Isuzu Trooper Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...