Question about 1998 Chrysler Town & Country
Have the transmission flushed, if you have a lot of miles on the car, the fluid may be too dirty to do it's job efficiently. It's a relatively cheap fix.
Kelly Anne Bishop
Posted on Nov 26, 2014
Change your fuel pump and fuel filter. That should help
Posted on Nov 26, 2014
Torue convertor or trans
Posted on Jan 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there should be a triangle shaped plastic section on the interior of the door behind the mirror, check it for a little plastic screw cover to remove it or you may just have to lever it gently to remove it.
once it is off it exposes the mirror retaining bolts which you undo to remove the mirror, I presume it has electric mirrors and if that is the case you will have to find the electrical wire plug for the mirror and pull it apart, replace mirror in reverse order of removing
Posted on May 13, 2009
2001 Chrysler Town and Country- Won't start. Turn over. It acts like the fuel is not getting to the engine. After many attempts , it starts and runs like there are no problems. The car has 120,000 and has never had a problem. Is the fule pump bad?
Posted on Aug 17, 2009
I have a 2005 Chrysler T&C. The turn signal would not work at all or activate incorrect side. The switch is easy to remove as described by dukecityman.
Once the switch is of, it has four screws holding it together.I took this apart to find that there was a circuit-board which was contaminated with dirt. wiped it of, put it back together, working fine.
If you take it apart use caution. there are parts on the "top" which will fall out. ( they go right back in) The circuit-board is on the "bottom" half. You really only need to take this part off. (less moving parts)
Your going to replace it anyway, whats the harm?
Posted on Jan 28, 2010
Tips for a great answer:
Jan 14, 2016 | Chrysler Cars & Trucks
Sep 09, 2014 | 1998 Chrysler Town & Country
Apr 11, 2014 | 1999 Chrysler Town & Country
Sep 07, 2017 | 2005 Chrysler Town & Country
Apr 03, 2010 | 2009 Chrysler Town and Country
Nov 24, 2009 | 1998 Chrysler Town & Country
Sep 07, 2009 | 1996 Chrysler Town & Country
Aug 16, 2009 | 1999 Lincoln Town Car
Jun 25, 2008 | 2002 Chrysler Town & Country
Jun 24, 2008 | 2001 Chrysler Town & Country
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: