Question about 1998 Mercedes-Benz E-Class

1 Answer

Need to change left front side marker bulb on 98 clk 320

How do you get a the fixture to replace the bulb?

Posted by on

  • Geza Jan 23, 2013

    Front, it's part of the bumper molding

  • chris conn Jan 30, 2013

    pull down down plastic behind bumper or try from under hood

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 61 Answers

Front or rear

Posted on Jan 22, 2013

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
betz73
  • 298 Answers

SOURCE: front side marker

Under the hood on the backside of the light lens there is a ring with a wire in it. You must unscrew the ring and replace the bulb there. Now it will be a little difficult to get your hand in there but this is the only way to replace the bulb.

Posted on Oct 29, 2008

  • 28 Answers

SOURCE: 2000 320 clk--outside temp light is out...how do I replace it?

is the digits on the dash like 1.0 or is there no digits if there is no digits you need to send your speedo dash to speedo fixer it cost me £150.00 my clock and temp digits went off and had it repaired by this company can highly recommed them

Posted on Jan 17, 2009

  • 43 Answers

SOURCE: need to find battery location: 1999 Mercedes CLK 320

Hi, The battery is located in the trunk, under the trunk mat.

Posted on Apr 08, 2009

  • 4869 Answers

SOURCE: Mercedes Benz CLK 320 1998 Radio Code

try asking here

www.ukbookshelf.co.uk

Posted on Jun 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for the low beam for a 2005 clk 320


there should have a fuse layout or description in the fuse compartment near or under the light switch.

Mar 29, 2013 | 2005 Mercedes-Benz CLK 320

2 Answers

How to replace a front side marker bulb on a 2007 Toyota Yaris Sedan


You don't need a dealer for much of anything

All of todays vehicles require removing the lamp
assembly or housings,front or rear, of any vehicle,to
take out the lamps/bulbs

If you open the hood you will find screws that hold it in place

May not be an easy job, but that's the junk were sold

Sep 05, 2012 | 2007 Toyota Yaris

1 Answer

How to replace passenger turn signal bulb


The side marker light must be removed in order to get at the turn signal light.
There are two screws holding the side marker light which is situated above the turn signal.
Open the hood.
Remove the phillips head screw at the top of the side marker light.
Using a long #2 Phillips screwdriver, remove the screw on the outside of the side marker light. This can be seen by looking between the lower side of the side marker light and the top side of the turn signal.
The side marker can be moved.
The turn signal has one screw on the top of the fixture that must be removed.
Slide out the turn signal fixture. There is a small feature on the lower front corner of the turn signal fixture that you must note to properly reinstall the turn signal.
In order to get to the bulb, rotate the bulb socket 1/4 turn CW or CCW. The bulb socket is loose.
The bulb is simply pressed into the socket.
Not sure of the type, but it can be found at your locale auto parts store.
The bulb is used in several places on the 1994 GC, so get apacket with two, if possible.
Assembly in reverse. Be careful not to overtighten the screws as they are replaced

May 08, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Change front turn signal


The side marker light must be removed in order to get at the turn signal light.
There are two screws holding the side marker light which is situated above the turn signal.
Open the hood.
Remove the phillips head screw at the top of the side marker light.
Using a long #2 Phillips screwdriver, remove the screw on the outside of the side marker light. This can be seen by looking between the lower side of the side marker light and the top side of the turn signal.
The side marker can be moved.
The turn signal has one screw on the top of the fixture that must be removed.
Slide out the turn signal fixture. There is a small feature on the lower front corner of the turn signal fixture that you must note to properly reinstall the turn signal.
In order to get to the bulb, rotate the bulb socket 1/4 turn CW or CCW. The bulb socket is loose.
The bulb is simply pressed into the socket.
Not sure of the type, but it can be found at your locale auto parts store.
The bulb is used in several places on the 1994 GC, so get apacket with two, if possible.
Assembly in reverse. Be careful not to overtighten the screws as they are replaced.

Mar 29, 2011 | 1994 Jeep Grand Cherokee

3 Answers

2003 ford focus zx3 How to replace rt front marker bulb ???


the inner fender will provide a way. I would simply take it to a store and ask them nicely if they will do the install - -many times they will do it and at no charge. - if you must - -carefully pull away the inner fender from under the car - and look for the back of the marker -

DO NOT PRY on the plastic or you will break it and still not be able to change out the bulb.

Mar 11, 2010 | 2003 Ford Focus

3 Answers

Replace parking/marker bulb front pass 98 Jeep Grand Cherokee


look in between the marker and headlights its a screw there screw it out

Apr 04, 2009 | 1998 Jeep Grand Cherokee

1 Answer

I ned to change left side marker light up front bulb 194na how do i get assembly out on 1996 mercury grand marquis


I changed the front left marker light on side of headlight assembly by unscrewing the screw on the far back of it. then i just pulled it off. it felt like it was gonna break but it came off just fine

Mar 22, 2009 | 1996 Mercury Grand Marquis

1 Answer

Headlight bulb replacement & side marker light bulb replacement


i think there are two flat guide pins that hold the headlight assembly in .. just pull them straight up ..and the assembly should come out ..hencse replace the bulbs.

Nov 15, 2008 | 1999 Pontiac Bonneville

1 Answer

Turn Signal Side Marker Bulb Replacement


I hve the same issue. I have replaced all the bulbs on the fron and back of the left side of the car and still the left front blinker does not blink.

Sep 21, 2008 | 2005 Chevrolet Cobalt

Not finding what you are looking for?
1998 Mercedes-Benz E-Class Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...