Question about 1996 Geo Tracker 2 Door

1 Answer

How to attach canvas top to tailgate - 1996 Geo Tracker 2 Door

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 3,103 Answers

If there are no connectors made into either part, use velcro strips like some outdoor winter clothes have on them..use the nonstick (smooth) part on the metal gate and the rough side onthe fabric top..these are self sticking adhesive backed but they can be glued on both places also.. good luck// velcro strips can be glued on the metal with weatherstrip adhesive and the fabric side can actually be sewed in place if desired..once its done its done too...

Posted on Jan 22, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2013 Dodge caravan and the gate warning is on but the gate is closed


There are micro switches in the tailgate called tailgate ajar sensors, they are attached to the tailgate latch, one or both of them is defective.

Sep 29, 2016 | Dodge Cars & Trucks

1 Answer

Rear soft top window is cracked. Can I just replace it or do I need an entire new soft top?


You can have the rear window replaced. Bring the top to canvas repair shop (boat canvas shop) and get a quote.

Dec 11, 2010 | 2006 Jeep Wrangler

1 Answer

The rod right hand side of tailgate is not attached


You should be able to feel around and locate that rod. After you get it you can use some pliers or vice grips to put on the rod to release the lock on that side and the handle on the other side.
As long as the locks and the rods move freely and are in good shape then all you will need is a new handle asm. It will come with new clips and on the other side of the tail-gate are 3 torque-head screws that will need to be removed to replace that handle.

May 11, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

06 Silverado tailgate stuck closed


You should be able to get in between the fender and tailgate with a long screwdriver or piece of flat metal and push the catch back into the tailgate. Then pull the handle to release the other side and the gate should open. Hope this helps.

Mar 02, 2010 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

1995 Saab 190 convertible, the rear windshield is detached at the top and bottom. It there a way to re attach this properly. The strip the window is supposed to be attached to is torn on the outside but is...


I'm not sure if it is exactly the same problem or not. In my case the glass detached/unglued, on both sides, from the strip that is sewn to the top. I used Clear RTV Silicone Adhesive and Sealant made by ProSeal and purchased at Harbor Freight.

Be careful not use acrylics . Even though they will water proof, they become brittle with temperature changes. You want and adhesive that remains flexible.

Good luck.

Nov 09, 2009 | 1995 Saab 900

1 Answer

Tailgate latch will not lock when closed


There are two Possibilites with this issue ... Either the latches are bound or rusted and can be lubricated with lithium grease after cleaning or the plastic retaining clips may have broken inside your tailgate. To locate these, remove the three bolts holding in the latch assembly and inspect the clips attached to the two control rods that will latch/release your tailgate. I have found spraying white litium grease every three months into the latches of my tailgate has eliminated the same problem on my truck.

Jul 17, 2009 | 2006 GMC Sierra

1 Answer

1999 Subaru Outback Tailgate Latch does not Actuate


there should be a piece of plastic or metal that hold the bar and is connected to the outer handle.

Jun 21, 2009 | 1999 Subaru Legacy

2 Answers

1987 toyota 4runner tailgate window stopped working


REMOVE THE REAR TRIM PANEL ON THE TAILGATE AND SEE IF THE MOTOR IS GETTING 12 VOLTS AND A GOOD CHASSIS GROUND CONNECTION, MANY TIMES THE WIRING HARNESS THAT GOES IN TO THE TAILGATE DEVELOPES A OPEN/BROKEN WIRE FROM THE REPEATED OPENING AND CLOSING OF THE TAILGATE, THE WIRE BREAKS INSIDE THE PLASTIC INSULATOR AROUND THE WIRE, SO IT IS NOT APPARENT ON VISUAL INSPECTION, REQUIRES THE USE OF AN OHM METER AND A VOLT METER.

Mar 30, 2009 | 1987 Toyota 4Runner

1 Answer

2003 Ford Explorer back door latch will not open


Mine just did the exact same thing. The latch may be moving freely because it is not hooked to the latching mechanism anymore. In my case, the handle had broken where the handle hooks to the rod that operates the mechanism. Go to the Ford dealer and buy a new handle. Here in S.C. it was $24. You can't get this at the parts houses. Start by removing the plastic "Ford" cover that is over the liscense plate lights. You then have to remove the aluminum rivets that hold the handle to the tailgate from the outside and remove the broken latch. Remove the pull handle loop on the interior side of the tailgate (2 screws), unsnap the inside plastic tailgate interior panel, and pull down the black plastic sheeting that is underneath the panel to make access to the mechanism inside of the tailgate. There is also a hard plastic cover that you will see that needs to be pulled loose to open another access hole. Install the new tailgate latch handle by sliding back into the mounting holes and attach with two 10-32 screws and nuts. The new handle will come with a new yellow rod attachment piece on the handle. You will see inside of the tailgate a small rod hanging down, most likeky it will have the same rod attachment piece as the one on the new handle. Note the position of the yellow piece on the rod, as you will connect the new piece in the same place. Once the rod is hooked up, relubricate the metal mechanism with a light machine oil, replace the black plastic cover, replace the black plastic sheeting, (secure with a small amount of duct tape), replace the tailgate interior panel, replace the pull handle loop, shut tailgate, replace "Ford" cover over lights, and you're done!

Mar 23, 2009 | 2003 Ford Explorer Sport

1 Answer

Tailgait won't open on 1997 F350 Power Stroke


Remove the panel on the inside of the tailgate. You will find the plastic attachment pieces are broken that attach the bars to the mechanism are broken. Available and inexpensive at Ford. Also keep all the linkage and moving parts lubed for smooth operation.

Jul 31, 2008 | 1997 Ford F350 Crew Cab

Not finding what you are looking for?
1996 Geo Tracker 2 Door Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...