Question about 2004 Jeep Grand Cherokee
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This seems to be the affects of a bad dinamo charging your battery . If you take a appart the dinamo you should fine a part called in mechanic terms "the bones" they look like 2 black magnets with a wire coming out of them . They are not expencive and you should not change your dinamo untill you try this first a car dinamo is very expencive .
Posted on Jan 21, 2009
It has to be a broken wire! Initially, I lost the door locks & power to the windows ONLY when the drivers door was open. When I closed the door, the problem went away. Finally, I had the problem all the time. I checked for 12 vdc at the switch in the drivers door and there was NO POWER. In the rubber boot (between the car & door) I found the grey wire (with a pink stripe) was broken internally but the INSULATION WAS NOT!!!
Posted on Jan 05, 2009
Check this link & scroll down to your engine. Click on picture to expand.
Posted on Feb 03, 2009
I just had the same with mine, pull the rubber boot back on the drivers side front door and look for a severed wire, mine was black...simply spliced the wires back together and problem solved!
Posted on Mar 23, 2009
There are two parts to it, a voltage resistor, and the EL panel itself.
You need to remove the console first. There are 2 screws under the front rubber pad, two under the cup holder, two in the bin. Remove those six first, take the storage bin out, then slide the rear cupholder out, remove the two screws under the cup holder, and one in front of it.
There are a total of 6 flat screws, and 3 self tapping screws you have removed.
Put the parking brake on, shift the tranny to N, and the transfer case to the middle position if equipped.
Remove the entire console. Slide the shifter beezel as far up vertically as you can. There are 4 clips you ned to remove to do it.
You will see a blue and black wire running into the back. Follow those wires to the resistor. You will see a transparent EL panel attatched to the resistor by two clips.
Usually, one or both of these clips has come loose, causing the light to work intermittantly. Clip them back on, and turn on the headlights to confirm that the light works correctly now.
Re-install everything in the opposite order.
Posted on Oct 11, 2009
Tips for a great answer:
Dec 16, 2013 | 2004 Jeep Grand Cherokee
Sep 23, 2012 | 2004 Jeep Grand Cherokee
May 03, 2010 | 1998 Jeep Grand Cherokee
Dec 07, 2009 | 2004 Jeep Grand Cherokee
Nov 30, 2009 | 2004 Jeep Grand Cherokee
Sep 17, 2009 | 2004 Jeep Grand Cherokee
Jul 18, 2009 | 2004 Jeep Grand Cherokee
Dec 02, 2008 | 2004 Jeep Grand Cherokee
Aug 04, 2008 | 1997 Jeep Grand Cherokee
105 people viewed this question
Usually answered in minutes!