How to see timing mark

THE TIMING MARKS ARE ON THE HARMONIC BALANCER WHEEL.

parts store has a detailed picture of it..

For timing marks and timing alignment diagram of 2.7 intrepid, click the link below and view its details:----

http://schematicsdiagram.blogspot.com/2012/12/dodge-intrepid-2000-v6-27-timing-marks.html

-------------

These wil help.

Thanks.

you dont need a diagram to see the timing marks on the top/bottom pulleys,just clean them off and run a piece of chalk around the perimeter.they are a bit obvious

I have a Toyota Town Ace diesel van, the timing belt broke and I need step by step help how to install new timing belt - timing marks diagram.

• It's a timing chain not a belt.

• This diagram shows how to position the lower timing chain so that the mating marks line up.

• Lower timing chain tensioner and timing chain guide positioning.
  

Double check the mating mark alignment of the upper timing chain and idler sprocket.

• Make sure that the upper timing chain and camshaft sprocket mating marks align.
  

• There are the diagrams you requested.
• Hope this helps...

• 
  

• It's a timing chain not a belt.

• This diagram shows how to position the lower timing chain so that the mating marks line up.

• Lower timing chain tensioner and timing chain guide positioning.
  

Double check the mating mark alignment of the upper timing chain and idler sprocket.

• Make sure that the upper timing chain and camshaft sprocket mating marks align.
  

• There are the diagrams you requested.
• Hope this help.

• Hi, I can help. Please see the diagrams below for your timing marks.

• The picture below is the crankshaft marks that need to be lined up before you remove the timing belt.

• Below is the intake and exhaust camshaft pulley marks.

• Below is an exploded diagram of the engine components in relation to the timing belt.

• Please not that this diagram is good for both 4X4 and 2X4 2.0 Engine (which is the only engine Kia Sportage had that year).

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

Sorry, can not fine a timing diagram, both cam's should read (up) at 45 deg., both timing mark's should meet at center, looking at motor, the right gear at timing mark st 9 o'clock, and left gear timing mark at 3 o'clock, the crank gear timing mark at about 1 o'clock, alidn mark on crank gear, with mark on housing, I hope this helps you, also the timing belt part number is Gates # T265.

http://images.eurotuner.com/images/eurp_0801_07_z+2001_vw_golf_1-8t+1-8_liter_20v_engine_atp_gt28rs_turbo_vf_engineering_engine_mount_usrt_genesis_415cc_injectors.jpg please rate me!!