Question about 2007 Ford Fiesta 1.4

Open Question

How to change 07 ford fiesta egr valve

Is it hard to change can i do it myself and where is ot on the enguine

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 105 Answers

SOURCE: eobd code 4010 insufficient flow to egr valve on 2001 ford maveri

dpbeffe sensors on fords are a common problem I had the same issue with several fords of same year new sensor from ford only cost me 38$ from ford just make sure both tubes to dpfe are clear though any blockage screws up the reading from the sensor

Posted on May 20, 2009

Ad
  • 61 Answers

SOURCE: I changed EGR valves, selinoid, sensors, and even

go to auto zone or someone with a scan tool to find out what codes are stored on the computer in the car

Posted on Jul 30, 2009

  • 31 Answers

SOURCE: heating problems ford fiesta 12.5

try to flush the radiator it might be clogged ,,or could be the water pump

Posted on Aug 29, 2009

digritz
  • 530 Answers

SOURCE: got a code 401 EGR insufficient flow. so i changed

Your problem may be with another component of the EGR system. It is the Delta Pressure Feedback EGR sensor and it is know to have problems. The sensor is connected to the EGR valve by the two lines coming off it. If you do a image search for DPFE Sensors on your make and model you can get an idea what it look for. It may be tucked back behind the intake and firewall. Also check all the hoses connected to it. A vacuum leak could aslo be at fault.
Because Ford has had a lot of problems with these, it is possible that it may even be under a recall so check with a ford dealer before spending any of your own money.
Hope this helps.

Posted on Sep 27, 2009

daves944
  • 1050 Answers

SOURCE: egr valve replacemebt

It's bolted onto the intake, next to the throttle body. If you look into the engine compartment and see the oil dipstick, look up and to the right. It will have a steel tube coming up to it from the exhaust. Why do you want to replace it? They rarely fail. EGR problems (codes) on Fords are usually caused by the Differential pressure feedback sensor.

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove inside rear door panel on fiesta 2015


Ford Fiesta Plastic Interior Door Panel Removal Guide ...

www.paulstravelpictures.com/Ford-Fiesta-Interior-Door-Panel-Removal-...
Ford Fiesta Interior Door Panel Removal Guide How to take off the plastic interior door panels in a 6th generation 2009-2015 Ford Fiesta to upgrade the ...

Ford Fiesta inner door panel removal (I removed the top one ...

www.fiestafaction.com/.../44959-Ford-Fiesta-inner-door-panel-removal-...

Jan 19, 2015 - 10 posts - ‎3 authors
This is an excerpt from the manual: Remove the rear door window glass. ... Route theinterior door handle cable and door lock actuator electrical connector through the ...Last edited by WildmaninME; 01-19-2015 at 07:41 PM.

Ford - door panel removal - fiesta - YouTube

? 2:19
https://www.youtube.com/watch?v=1URT13Yusjg
Oct 19, 2013 - Uploaded by one2three
this is the removal of a door panel from a ford fiesta 2001. ...Replacing Broken Inside Door Handle on 2007 Ford Fusion - Duration: 5:32. ... Ford Fiesta 1.25 2004 - Cleaning and adjustingrear brake drums - Duration: 8:47.

How To: 2012+ Ford Focus Rear Door panel removal(SE,ST ...




Jan 13, 2016 | Cars & Trucks

1 Answer

96 cutlass supreme will not pass emission in ut. what should I do? KOER failed, trouble code po401


cleanout egr valve and troutle body . Or replace egr with new one, clean, check vacumm lines , check for clogged check , depending on modle of car you can pippoint problem as some have a common part problem depeding with make of car. But all have to do with exaust system. Insufficient flow exaust flow. Im not an expert, all I know it is related to this, I have it myself so im googling it.

Ford EGR valve

The OBDII fault code P0401 means that the engine computer has detected that the Exhaust Gas Recirculation (EGR) system flow is insufficient. Read more how the EGR system works below. What could cause the code P0401 - clogged or restricted EGR passages
- faulty EGR valve
- EGR valve stuck closed
- problems with the DPFE sensor (Ford)
- problems with hoses to the DPFE sensor (Ford)
- problem with the EGR vacuum switching valve (Toyota)
- clogged catalytic converter
- carboned up EGR temperature sensor
- vacuum supply issues at the vacuum-operated EGR valve
- electrical problems with the EGR valve control circuit
- engine computer problems
helpful website helps you with pinpoint and sou;ution related to auto make and model shows you most common cause of code reading.
www.samarins.com

Apr 16, 2013 | Cars & Trucks

1 Answer

How dificult is it to change drive shaft universal joints myself on my ford focus 1998 5 door hatch


You have front wheel drive & CV Joints,
not U-Joints ,is that not correct

CV Drive Axles in front wheel drive vehicles
are just replaced as a complete axle assy

Jan 29, 2013 | 2008 Ford Fiesta 1.4

1 Answer

Ford focus 2008 egr valve 1.6 diesel


I found 3 sources, Supaprice.Co.UK, Ebay/UK and Amazon/UK for an initial search.

Just go to your Browser and type "2008 Ford Focus 1.6L diesel egr valve" or add UK to the field and run a search. There were more than the 3 results I mentioned

You may have success by looking up the Toll free numbers of Autozone, Oreilys, or Advance autoparts and ordering Internationally.

I hope my solution is helpful, please rate.

Nov 05, 2012 | Cars & Trucks

1 Answer

Recently had all plugs and EGR Valve changed.


firewall

4 - 8

3 - 7

2 - 6

1 - 5

front

The spark plug firing order is 1 - 3 - 7 - 2 - 6 - 5 - 4 - 8 Make sure the coil is good.

Jul 21, 2010 | 2000 Ford Expedition

2 Answers

My emission light came on a few weeks ago...what causes this...Money is tight & I'm taking it in in January for oil change can it wait? Or can I fix at home myself? I have a 2004 Ford Windstar.


if it is the check engine soon light,it is only a sensor telling you your van is not running 100% on fuel economy or pollution standards have dropped .no big deal you can fix it when ever.

Dec 22, 2009 | 2004 Ford Windstar

1 Answer

How to remove egr valve on 1997 lincoln towncar


The EGR valve can be replaced by using a pipe wrench, or a standard wrench to remove the fitting over the pipe going into the EGR valve... it's not too hard to replace, I've done it on mine myself... I have a 97 town car as well... the only problem is that my EGR valve was fine, but the computer told me it was bad... But I found out that the EGR sensor was bad, not the valve... now to replace the EGR sensor you need to remove the engine... FORD in their infinite wisdom decided to put the EGR sensor on the rear of the engine, half way down next to the firewall...

My mechanic said that as long as the car is running fine, I souldnt worry about the EGR sensor, its job is to tell me when the EGR valve is bad...

Hope this helps

Jun 27, 2009 | 1997 Lincoln Town Car

1 Answer

2001 Ford Escape error code P0402


Ok here is the solution when I had the exact same problem with my 2001 Ford Escape:
Replace:

Idler air control valve
EGR vaccum sylenoid
EGR valve

I did all of this work myself (and as a girl it was not hard at all), it cost me around $170.00 for all of the parts, had it done in less than 2 hrs., erased the codes and have not had a problem since then! I hope this helps you out, cuz it sure would have helped me out when I encountered the same problem.

Apr 07, 2009 | 2001 Ford Escape

1 Answer

How to change reverse light bulb on ford fiesta lx 1999


you have to open the boot and go in through that way. you know where the lights are? lift the carpet bit back and you should be able to do it that way. havent tried it myself but going to try and change mine tonite

Jun 16, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
2007 Ford Fiesta 1.4 Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...