Question about 2011 Jeep Grand Cherokee

Open Question

Brake vacuum booster 2011 jeep grand cherokee

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mcgyver468
  • 710 Answers

SOURCE: 2003 Jeep Vacuum Diagram

THERE SHOULD BE A EVAP/VACUUM DIAGRAM UNDER THE HOOD ON A WHITE STICKER. SOMETIMES THEY ARE ON THE BOTTOM SIDE OF THE HOOD ITSELF. I HOPE THIS HELPS. PLEASE KEEP ME POSTED THANKS FOR USING FIX-YA AND FOR AN HONEST RATING/COMMENT. GOOD LUCK

Posted on Aug 29, 2009

ZJLimited
  • 17970 Answers

SOURCE: 1993 jeep grand cherokee, choking, pulling then stalled,

Check:
- Fresh Air Intake Hose: Clogged or Damaged FreshAir Intake Hose.
- Carburetor: Worn, Faulty or Damaged Carburetor.
- Mass Air Flow Sensor: Damaged, Loose, or Faulty Mass Air Flow Sensor or Circuit.
- EGR Valve: EGR Valve Sticking Open/Leaking.
- Idle Air Control Valve: IAC Valve Sticking or Faulty.

Good luck.

Posted on Sep 01, 2009

  • 398 Answers

SOURCE: How to install a brake light switch on a Grand Jeep Cherokee

Dont do it... It will take you bout 30 minutes to remove and replace it on the steering column

Posted on Dec 05, 2009

wireguy212
  • 1627 Answers

SOURCE: 96 jeep grand cherokee hatter has defrost only .

Check the sticker under the hood on the rad support or on the firewall,it should lead you to the problem.

Posted on Dec 15, 2009

  • 111 Answers

SOURCE: How do you replace power brake booster in 99 jeep

you first have to drain and disconnect the brake master cylinder(it will have to be bled before install.) remove all vacuum line and electrical connectors. then disconnect the booster and reinstall is reverse of removal. some specialty tools and is a 3 out of five in difficulty for a professional mechanic.hope this helps

Posted on Dec 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake pedal flutters after vacuum booster replacement


did you read all words in the FSM first?
lots of details.
04 is here for free, see brake chapter, there?
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

these systems are complex
best bet, is always RTM first then avoid costly mistakes or????

https://www.techauthority.com/en-US/Pages/FacetSearchResults.aspx?make=Jeep&year=2005&model=GRAND+CHEROKEE+LIMITED&engine=5.7L+HEMI+V8+-+MDS&producttype=All+Product+Types&ptCatId=All+Product+Types

insane cost of book'
but can buy CD on fleabay, id do that.

Oct 08, 2014 | 2005 Jeep Grand Cherokee

1 Answer

My jeep Cherokee 2002 automatic wont idle. when I apply breaks it dies, now it wont idle at all so I cant drive it. starts fine. I had to free run in neutral to move it now Im scared I did more damage.


The problem I would say is in the brake booster diaphragm or booster valves in that there is a hole that is allowing air directly into the manifold when you apply the brakes. Check the vacuum line for tightness at the clamps as well. Normally a new booster will fix the problem

Aug 03, 2013 | 2002 Jeep Grand Cherokee

1 Answer

Hi i just replaced a brake booster in 1999 jeep grand cherokee because of vacuum leak .but now i ll have to push down to brake .how to make it little hard ?


Sounds like air in the brake system. Will need to bleed the brakes to remove the air. May possibly have to bleed the master cylinder as well.

Dec 12, 2012 | 2001 Jeep Grand Cherokee

1 Answer

Brakes


You have a leaking power brake vacuum (this is what you hear) operated power booster. Go to this link to read the procedure of removing and pacing the power brake vacuum booster

Jul 12, 2012 | 1996 Jeep Grand Cherokee

1 Answer

Vacuum booster leaks do I need to disconnect the brake lines when I replace the booster


not really it should move forward to let you removed booster
only line to remove would be vacum line

Apr 03, 2011 | 1999 Jeep Grand Cherokee

1 Answer

How do you replace power brake booster in 99 jeep grand cherokee?


you first have to drain and disconnect the brake master cylinder(it will have to be bled before install.) remove all vacuum line and electrical connectors. then disconnect the booster and reinstall is reverse of removal. some specialty tools and is a 3 out of five in difficulty for a professional mechanic.hope this helps

Nov 05, 2010 | 1999 Jeep Grand Cherokee

1 Answer

1996 jeep cherokee engine dies when pressing on the brakes, checked vaccum lines and cant see a problem.


Try plugging the vacuum hose from the booster to the manifold AT THE MANIFOLD.
DANGER, DANGER, DANGER, Be aware NOT to drive at speed because you will NOT have power assisted brakes but they WILL work to a reduced capacity.Drive VERY slowly on level surface.

This will eliminate air leaks at booster and manifold hose.
Another test is to get someone to hold foot hard on brake pedal with engine running and you listen under bonnet for air leak.

Oct 17, 2009 | 1996 Jeep Grand Cherokee

1 Answer

2000 grand cherokee ltd.Brake problem


You need break booster what happen is when you tern the car of the vacuum leaks out when you start the car its take time to build the vacuum that's why it does not work at first time then its come back

Apr 13, 2009 | 2000 Jeep Grand Cherokee

2 Answers

99 jeep grand cherokee


the noise you hear is probably coming from the power booster for the braking system, i would ge it in and have it checked as soon as you can

Feb 21, 2009 | 1999 Jeep Grand Cherokee

1 Answer

2000 Jeep Grand Cherokee brakes make a hissing noise


has your brake pedal seem to be stiffer than usual? the sound you hear is from the brake booster if it has a leak it will cause a noise but you would have a stiffer pedal because the booster is loosing vacuum.

Feb 08, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2011 Jeep Grand Cherokee Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...