Question about 2005 Hyundai Accent 1.3
Central locking is faulty as the front passenger door lock is permanently in the locked position - the door will only up when I pull the lock towards me with great force and then open the handle. All of the other doors are fine.
You will have to change the locking part to fix your issue or try pb blaster
Posted on Jan 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: central locking
Resolving this problem will require removing the door panel in question, and checking for voltage at the solenoid when the unlock button is pressed.
If there is 12V at the positive wire to the solenoid, but the door does not attempt to unlock, you must replace the solenoid.
Doors are not fused individually, so the fact the other doors are operating properly rules out fuses.
Remove the door panel, and check for voltage - if there is no voltage, the wiring is suspect. This would require more in-depth troubleshooting - checking wires for continuity to ground, and overall continuity.
Start with the door. Re-post your findings and I can help you additionally.
Thanks for using FixYa - Your FiXyA rating is appreciated!!
Posted on Jan 22, 2009
the little metal rod that goes from the key part of the door lock to the electrical switch has come off ,no doubt the plastic clip that holds it has broken
Posted on Jun 21, 2009
SOURCE: Central locking
Without diagnosing this problem myself, the possible causes are MANY!
Best solution is take the vehicle into a Hyundai Dealership and have it diagnosed/troubleshot by a qualified technician.
Posted on Sep 06, 2009
might be the motor, that needs to be checked, it could be the cables giving power to that motor or could be the unit responsable of sending power, get a electrical diagram for the sistem and check every step for the voltages expected.
hope this helps
Posted on Nov 18, 2009
Tips for a great answer:
Apr 30, 2014 | Cars & Trucks
Feb 12, 2014 | Cars & Trucks
Mar 02, 2013 | 2006 BMW 3 Series
Aug 26, 2012 | 2001 Ford Focus
Feb 27, 2017 | 2003 BMW 325
Jan 14, 2010 | 1992 Subaru Legacy
Dec 19, 2009 | 2003 Land Rover Discovery
318 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: