Question about 2007 Ford Fusion V6
When my ford fusion 2007 got its air conditioner fixed the mechanic must have disconnected the aux cable inside, how do I reconnect it?
Take it back to whomever worked on it
No idea what your referring to without seeing the car
Posted on Jan 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
depending on which trans it is there is a small dipstick on the trans at the front on the bottom these transmissions take a specific fluid so be careful
Posted on Nov 22, 2008
i read other forums and found out if you remove the ring around the shifter button it releases the key. sometimes this gets stuck and the car thinks it is still in gear so it will not allow the key to release. this worked when it happen to me!
Posted on Mar 10, 2009
The plastic door handle is broken.
You will need to get a replacement door handle.
Go to http://www.flickr.com/photos/gtppilot/sets...57607539089979/
This should help. It is a set of photographs and instructions to do the job of replacing the handle.
Posted on Apr 10, 2009
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Oct 16, 2009
Tips for a great answer:
Nov 08, 2015 | 2009 Ford Fusion
Nov 02, 2015 | 2014 Ford Fusion
Nov 21, 2014 | 2007 Ford Fusion V6
Oct 14, 2014 | 2007 Ford Fusion I4 SEL Sedan
May 20, 2017 | 2007 Ford Fusion V6
Feb 16, 2013 | 2007 Ford Fusion V6
Jun 19, 2011 | 2007 Ford Fusion I4 SEL Sedan
Apr 27, 2010 | 2006 Ford Fusion
Dec 30, 2009 | 2007 Ford Fusion I4 SEL Sedan
Apr 18, 2009 | 2007 Ford Fusion I4 SEL Sedan
Jun 13, 2014 | 2007 Ford Fusion V6
185 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: