Question about 1992 Honda Accord
My drivers side electric window will go down easily but when I try and put the window back up I have to play with the switch a bit in order to inch it up. Once I gets window about 3 inches or so from being closed it goes up with no problems. I'm not sure if this is a switch issue or a window motor issue. Thank you in advance for you assistance.
The system is called the window regulator; your likely trouble is with the drive motor in the regulator assembly or the linkage and window tracks inside the door are tired.
Posted on Mar 21, 2015
It sounds more like a motor issue and it goes up easily when almost at top because its not working the motor as hard as when it is lower
Posted on Jul 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: passenger electric window
I think that what has happened with your vehicle, is that the master (driver control) switch has become defective....If you have a friend who is good with electronics you may be able to ask for help in getting it fixed....otherwise a new unit is needed.
Posted on Aug 20, 2008
A) Remove the screws in the following locations:
When I examined the problem that I had with my Odyssey, I found the following:
Posted on Nov 27, 2008
Window motors & regulators go bad every day. Pull your door panel, unplug the motor, if you have an ohm meter apply the leads to the leads into the motor. One will be ground the other two will raise and lower (reverse) the motor. If you show resistance between the leads the motor windings are good and the problem may be the window regulator. If you do not have an ohm meter, you can run two wires (one ground, the other hot) and test the motor by applying elec to it.
Posted on Jul 03, 2009
It would be a switch. Try pushing the switch down hard and wiggling it. It may work which would indicat a switch. Since one direction works It has to be the switch ,
Posted on Jul 19, 2009
Tips for a great answer:
Apr 05, 2013 | 1982 Porsche 911
Feb 22, 2013 | 2000 Saturn SL
Oct 01, 2012 | 2009 Chevrolet Silverado 1500
Mar 27, 2017 | 2003 Cadillac Deville
Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.
Sep 12, 2012 | 2011 Hyundai ix35 2.0
Jul 31, 2017 | 2006 Chevrolet Silverado
Jul 27, 2011 | 2000 Chrysler 300M
Jun 18, 2011 | 2004 Cadillac CTS
Apr 20, 2010 | 1999 Hyundai Sonata
Jul 17, 2009 | 1994 Oldsmobile Silhouette
134 people viewed this question
Usually answered in minutes!