Question about Cars & Trucks
I THINK IT MIGHT BE THE RESISTOR THAT CONTROLS THE BLOWER OR THE BLOWER ITSELF MIGHT BE BAD. THERE IS NO FUSE FOR THE BLOWER ONLY A RELAY ACCORDING TO THE OWNERS MANUAL.
There is a fuse, may not be solely for the blower but it has to be fuseed! Anyway I would suggest checking all fuse's both inside and outside boxes first then locate blower relay swoop with the one next to it and test blower if its stil not working its the fan speed switch! They gave trouble on previous models! ! You'd be very unlucky for a 2009 fan motor to fail...good luck.
Posted on Jan 22, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
it is called blower motor resistor , should be close to blower motor , you will see a plug type connector with two screws , remove the screws and there should be a resistor inside the cover for the motor, swap with new and reassemble
Posted on Feb 19, 2009
SOURCE: Blower motor stopped working.
ok to the left of the steering wheel by brake pedal remove fuse panel and look for no. 3 location blower relay after that your going to look for no. 8 blower fuse 40amps after that look for no. 28 its a 10amp fuse this is blower coil relay but if you have puddle lights that fuse is good also runs them !! Hope this helps you out !! Rick from nwi auto acdelco & ford parts dealer !
Posted on Mar 04, 2009
the hvac selector switch in the dash may be the problem.You need to remove the switch and look at the connector on the back of switch,see if there are any burnt wires at the connector or switch.It's all electronic and the switches have been known to burn out on this and other model.
Posted on May 26, 2009
SOURCE: blower motor does not work
I had the same problem, replace, replace, replace. Check, check and recheck. What I found was the blower motor resistor, located in the blower squirrel cage area, two prongs and a curly wire, was bad. Took the new one back, (it ohmed out okay, continuity ok, all ok!) replaced it with another, and Bingo, problem solved. Frustrating to say the least. After two relays and a blower switch, and test, test and retest. It was a faulty resistor. Made in Mexico. And no guarentee, even though new, it works. Trial and error. Even the dealer parts are Honcho en Mexico. Thanks NAFTA. You gonna make us all welfare babies.
Posted on Sep 28, 2009
Tips for a great answer:
Dec 23, 2017 | Ford E-150 Cars & Trucks
Dec 30, 2016 | 2009 Ford Flex
Feb 07, 2016 | Ford Cars & Trucks
Sep 17, 2012 | 2002 Ford E350
Feb 27, 2011 | Dodge Ram 2500 Cars & Trucks
Jan 15, 2011 | Ford E-Series Cars & Trucks
Dec 08, 2009 | 1995 GMC Jimmy
Sep 18, 2009 | 1990 Ford F150
Sep 04, 2009 | 2002 Ford E350
Nov 16, 2008 | 1993 Ford Econoline
Jul 17, 2018 | Peugeot Cars & Trucks
244 people viewed this question
Usually answered in minutes!