Question about 2004 Chrysler Crossfire

1 Answer

Fix Brakelight on Chrysler Crossfire 05

How do I replace the breaklight on a chrysler crossfire 05 limited? (the one in the rear). I have the bulb, but can't figure out how to get the plastic part off. No screws or anything.

Posted by on

  • gforce75 Jan 27, 2009

    Thanks a bunch!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

They Are Removed From The Inside. On The Inside Of The Car Find The Opposite Side Of Where The Light Is. There Will Be Either Carpet Or A Panel There Remove That And It Will Give You Full Access To The Lights. Use A Twist And Pull Motion To Remove The Light From Its Housing Then Replace The Bulb.

Posted on Jan 27, 2009

  • Michael Fisher
    Michael Fisher Jan 27, 2009

    They Are Removed From The Inside. On The Inside Of The Car Find The Opposite Side Of Where The Light Is. There Will Be Either Carpet Or A Panel There Remove That And It Will Give You Full Access To The Lights. Use A Twist And Pull Motion To Remove The Light From Its Housing Then Replace The Bulb.

  • Michael Fisher
    Michael Fisher Jan 27, 2009

    No problem thanks for using fixya.com
    Sincerely,
    Michael Scott


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can the 2005 Chrysler Crossfire Limited Coupe automatically turn on the low beam head lamps at night?


No. It has auto lamps.all newer vehicles have them. Some you can turn off. You have to have the light switch in the dash. If it is in the turn signal switch/ column. Your out of luck.

Dec 04, 2014 | 2005 Chrysler Crossfire

1 Answer

Went to buy an 05 Chrysler Crossfire Convertible from a used car dealer. He was replacing the spring in the key fob. When he tried to start the car, the engine turn over then stop. When tried again nothing...


Try using a code reader to reset the CPU and have him reprogram the key correctly as well. Personally I would not buy a car from this person until he had everything fixed properly.

Jan 10, 2014 | 2005 Chrysler Crossfire

1 Answer

Passenger side headlight assembly removal, is there more than 2 bolts, if so where


You can replace the headlights on your Crossfire easily by yourself. headlight image by Carbonbrain from Fotolia.com

When a headlight burns out on your Chrysler Crossfire, you do not need to rush to the repair shop to have it replaced. You can access the headlights in your Crossfire from within the engine compartment, allowing you to change the headlight yourself. The Crossfire uses an H7U headlight bulb, which you can find at auto parts retail stores or at a Chrysler dealership.
Difficulty: Easy

  1. 1 Open the hood of your Crossfire to gain access to the headlight assemblies. Press down on the tab on top of the light assembly cover. Remove the cover and set it aside.
  2. 2 Pull the electrical connection free of the bulb socket. Press the spring clamps securing the bulb into the light assembly. Pull the bulb straight out of position.
  3. 3 Insert the new bulb in the same position. Ensure that the spring clamps secure the bulb. Press the electrical connection into place.
  4. 4 Replace the light assembly cover and press it into position until it clicks, securing it in place. Repeat the same process on the opposite headlight if required. Close the hood and test the headlight operation.



Dec 12, 2010 | 2004 Chrysler Crossfire

1 Answer

05 chrysler crossfire wont turn over all electronics do work


Check the connections on the battery for corrosion, if ok then check the connections at the starter.

Nov 18, 2010 | 2005 Chrysler Crossfire

1 Answer

How to change parking light bulbs on chrysler crossfire


auto zone will change this little "peanut bulb" for you for the cost of the bulb.

Oct 03, 2010 | 2004 Chrysler Crossfire

2 Answers

05 Chrysler Crossfire Convertible top


Try using urethane sealant to redo the seal between the top and the glass.
I have a VW convertible that had the same problem. The sealant comes in a tube that you use in a caulk gun. Made by 3M and I purchased it from Advance Auto. About 18 bucks.

Jun 02, 2009 | 2007 Chrysler Crossfire Convertible

1 Answer

Brakelight


Hi mount on a 2005 limited roadster (and maybe coupe?) is the string of brake lights under the spoiler. on other vehicles, it is simply the 3rd brake light.

Jan 27, 2009 | 2004 Chrysler Crossfire

2 Answers

Converting built in infinity radio tuner to get european stations


Hi Barak, I have not seen an easy adjustment on any car stereo for converting the frequencies. The Crossfire stereo is manufactured by Becker. Try Becker of North America in Upper Saddle River NJ.

Nov 13, 2008 | 2006 Chrysler Crossfire

2 Answers

Rear lights


This could the problem with the brake switch get it checked it will fix the issue.................

Jun 04, 2008 | 2004 Chrysler Crossfire

1 Answer

Chrysler Crossfire tyre dilema


They are tubeless sorry buddy but you need a new tire. You can not fix cuts on the side wall of a tire for many reasons. Beside, if you can afford a Crossfire you can afford the tire, right? ;-)

May 15, 2008 | 2001 Chrysler Crossfire

Not finding what you are looking for?
2004 Chrysler Crossfire Logo

Related Topics:

660 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...