Question about 2002 Dodge Dakota Club Cab

Open Question

How to turn on high beams for dodge dakota - 2002 Dodge Dakota Club Cab

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
jgwhomeequip
  • 1902 Answers

SOURCE: no low beam headlights on my 1994 Dodge Dakota

Yes it could be your low beam that is out. Could also be a fuse that is blown I would check the bulb first then the fuse, if neither of those then it is the relay for the high and low beam

Posted on Feb 06, 2009

Ad
  • 205 Answers

SOURCE: 1992 dodge dakota 3.9 4x4 no low beams and one high beam

Hi the first thing I check on for anyelectrical problem is a bad ground connection. Follow the headlight wires as far as you can, even when they disappear into a larger covered loom at random places, maybe even right next to each light, you will find a wire or several attached to ground, could be a inner fender, engine, etc.. sometimes a inner fender ground is just a selftapping screw, It may be rusted out or just loose. Headlights work through relays that are also located in the fuse boxes. I assume you have checked both fuse boxes, in the truck and under the hood, good luck, Chuck

Posted on Mar 16, 2009

  • 75 Answers

SOURCE: Headlights sometimes cut out on a 1993 Dodge Dakota pickup

you may have a bad ground wire up by the head lights the ground spot should be with in a foot of one or the head ligghts

Posted on Aug 27, 2009

  • 7353 Answers

SOURCE: THE HEADLIGHTS TO MY 2000 DODGE DAKOTA WONT TURN

what switch did yoiu replace??? the power goes from the headlight switch then to the hi-lo beam switch and out to the bulbs. did you ck the bulbs?? they could both be burned out. The mechanic should not change anything until tests have been performed and the component that is at fault found. sounds like a parts changer.

Posted on Sep 23, 2009

  • 204 Answers

SOURCE: 1996 Dodge Dakota low beams not working but have

Check the bulbs to see if the low beams burnt out, if not, check your fuse panel.

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High beam lights stay on even though truck is


Check that the high beam relay contacts are not fused together .

Sep 20, 2014 | Dodge Dakota Cars & Trucks

1 Answer

My low beam works on both sides but not the high beam on the drivers side. also my blinkers dont turn on or blink but, if you use your hazards they turn on and blink on my 2001 dodge dakota v8


Headlamp operation is controlled by the central timer module. If 10A fuse 11 in the junction box is OK, the module could be defective.

Turn signal operation is determined by the position of the multi-function switch in conjunction with the combination flasher. If 10A fuse 19 in the junction block is OK, the flasher could be defective

Dec 09, 2012 | 2001 Dodge Dakota

1 Answer

The low beams in my 1996 dodge dakota flicker on and off but my high beams work fine


have you tried another headlight switch?another thing to check are the grounds and the headlight sockets.turn the headlights on and move wires around.you would be surprised at thing you do an old fashion wiggle test.i'm a 25+ year automotive diagnostic and smog tech.

Oct 07, 2012 | 1993 Dodge Dakota

1 Answer

The driver side headlight on my 2001 dodge dakota only works on hi beam what to do?


most likely you need to replace the light bulb, there are two light filament in the bulb one for high beam one for low beam the low beam must be burnt out.

Apr 23, 2011 | 2001 Dodge Dakota

1 Answer

1996 Dodge Dakota low beams not working but have high beams


Check the bulbs to see if the low beams burnt out, if not, check your fuse panel.

Feb 03, 2010 | 1996 Dodge Dakota

1 Answer

THE HEADLIGHTS TO MY 2000 DODGE DAKOTA WONT TURN ON, THE HIGH BEAMS FUNCTION, HAD A MECHANIC REPLACE SWITCH-SAME THING, TOLD TO BRING IT TO DODGE!


what switch did yoiu replace??? the power goes from the headlight switch then to the hi-lo beam switch and out to the bulbs. did you ck the bulbs?? they could both be burned out. The mechanic should not change anything until tests have been performed and the component that is at fault found. sounds like a parts changer.

Sep 23, 2009 | 2004 Dodge Dakota

1 Answer

No low beam headlights on my 1994 Dodge Dakota


Yes it could be your low beam that is out. Could also be a fuse that is blown I would check the bulb first then the fuse, if neither of those then it is the relay for the high and low beam

Feb 06, 2009 | 1997 Dodge Dakota

4 Answers

Why does my 1997 dodge dakota's headlights flicker on and off.


my 99 dakota has gone thru 3 switches. I have found that if they do it now ---i take off the instrument guard ---no screws ---
unscrew the headlamp switch ----and spray all movable parts with wd-40 it fixes it for about 3 months. my theory is the switch gets wet from AC condensation and builds up a film that the switch arm just rides on. hope this helps.

Jan 25, 2009 | 1997 Dodge Dakota

Not finding what you are looking for?
2002 Dodge Dakota Club Cab Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...