Question about 2000 Dodge Durango

1 Answer

No heat running hot i changed thermostate - 2000 Dodge Durango

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

You have a blocked heater pipe or pipe running to heater, some vehicles have a electric valve on the inlet pipe of heater that open & close allowing water through, they sometimes become stuck & need replacing. Also the system may have air in the system, you will need to bleed it.
But If you have water bubbling up in the header tank (expansion bottle) if you see when engine warms up water rising in it & also dropping in it, then your water pump will need replacing, because it is not pumping the water around the system.

Posted on Jan 22, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My engine is running hot.I replaced the thermostate and now I do not have heat coming outta my heater and it still is running hot


Did you get all of the air pockets out of the cooling system after replacing the thermostat ? Is the radiator and overflow tank full ?

Feb 23, 2013 | 2005 Chevrolet Silverado 1500 2WD

1 Answer

How do I change the water pump on my 2000 chysler grand voyager


3.3 AND3.8 ENGINES TAKE OFF SERPENTINE BELT 15MM ON BELT TENSIONER . REMOVE 2 HOSES OFF PUMP. 5 ?BOLTS AROUND WATER PUMP. IT WILL COME OFF WITH ANTIFREEZE LEAKING OUT. HAVE DRAIN PAN UNDER . ALSO IT IS GOOD TIME TO CHANGE THE LOWER HOSES. REINSTALL WITH NEW GASKET, FILL SYSTEM, PUT HEAT ON HOT AND RUN UNTIL THERMOSTATE OPENS, AND CHECK FOR LEAKS, TORQUE IF NESSESARY ( ENGINE OFF)!!REFILL AT SIDE TANK

Sep 29, 2012 | 2000 Chrysler Grand Voyager

1 Answer

Heater hoses do not get hot.Have replaced thermostate and still do not get heat inside the cab,What can I do?


Try this trick take the hoses off the heater core and flush it out with a water hose to get the airout the heater core.don't do it with the car running.goodluck

Dec 04, 2011 | Cars & Trucks

1 Answer

2000 Oldsmobile Bravada. Engine is running hot, and I have intermittent heat. I've replaced the thermostate last week and now the problem is worse than before. Engine will get up to 260 check gauges light...


CHECK FOR LOW COOLANT.YOUR CLUTCH FAN COULD BE BAD IT CAUSING ENGINE TO OVERHEAT.WHEN ENGINE GET HOT THE SILICONE OIL IN FAN CLUTCH GET HOT CAUSE THERMOSTAT SPRING EXPAND CAUSE FAN CLUTCH TO LOCK IN TURN FAST WITH ENGINE TO COOL OFF ENGINE. IF FAN IS WOBBLY OR FREEWHEELING ITS BAD.

Dec 17, 2010 | 2000 Oldsmobile Bravada

1 Answer

Van running hot replaced water pumb thermostate


my car still hot .we change the water pump,thermostat,coolant temperature sensor ,rad cap,and still hot the gauge is up and down??????

Dec 15, 2009 | 1999 Oldsmobile Silhouette

1 Answer

2004 chev impala, no hot air for heat, changed thermostate no difference


Get the heater core flushed if youy can verify that the valve in the upper heater hose moves when you go from hot to cold.

Nov 17, 2009 | 2004 Chevrolet Impala

2 Answers

After a short driver water comes out expansion tank


CHECK WATER LEVEL CHECK OIL LEVEL IF NO WATER FILL UP AND IF WATER DISSAPERS OR TURNS MILKY YOU HAVE A HEAD GASKET PROB CHECK WHILE RUNNING BUT DONT GET TOO HOT

Jul 29, 2009 | 1995 Mitsubishi Montero

1 Answer

THEROMSTAT/ 2002 DODGE DURANGO???


make sure engine is cool then drain coolant by opening the drain plug at bottom of radiator. remove cap from radiator so coolant will continue to drain and when coolant is down enough to pull off upper radiator hose at intake then close drain, then remove two bolts at coolant housing and remove thermostate. clean gasket material from intake and housing and replace with new gasket and thermostate tighten bolts install hose fill rad with coolant water mix 50/50 and run engine with heat on floor until gets hot and you see coolant flowing in rad, install cap

Jan 17, 2009 | 2001 Dodge Durango

1 Answer

Heaterblows cool air my temp gauge showing truck is overheating


change the thermostate and gasket after you change it let the truck heat up then cool then refill the radiator again after the thermostate opens do not open the radiaator with the truck hot or the upper hose hard

Dec 10, 2008 | 1992 Ford Explorer

Not finding what you are looking for?
2000 Dodge Durango Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...