Question about 1998 Toyota Camry

Open Question

1994 Toyota Camry 2.2 Si the engine stutters just before 2000RPM fuel or spark? replaced the coil and cap but still persisting

Feels like bad fuel or water contamination whilst driving, the engine runs well otherwise and ocasionally when cold I must add will drive normally, rev over 2000RPM and provide full power - a faulty sensor?? when warm?? help please

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dj_ricko_198
  • 128 Answers

SOURCE: 1994 toyota camry sputters

hi there
sounds like you need a tune up or you need your injectors cleaned
so i will help you clean them with out getting your hands dirty but you need to follow me every step of the way.
first i will give you my tips

  1. get a high quality fuel injector cleaner that you put into your fuel tank
  2. make Shaw you have just under a full tank of fuel
  3. while i never say that one should drive a car like it is a toy you are going to have to do some harsh exhilarating during this
  4. 1000rpm is 1 revs on your dash bored so if i say do 2500rpm it means do 2.5 on your dash (that's only if you dot know what rpm means)
  5. never turn the car off while we do this
  6. please do not speed you put your life and others at risk
  7. please do not drink and drive
OK now for the step by step instructions
  1. have what you need ready to go including the injector cleaner
  2. start your car and let it warm up keep the revs just over 1000 rpm
  3. as the car is running add the fuel injector cleaner
  4. when you have done this i want you to increase the revs to about 2000rpm
  5. keep it like this for about 30 seconds
  6. after the revs are back down to 1000 rpm i want you to get ready to take it for a drive
  7. OK so take it for a light drive around your street keep it very close to home as if your car stops you don't want to have to walk a long way
  8. once you have done this for a while and you feal confident i want you to be a bit quicker in exelarating giving a bit more power remember dont speed
  9. now once you have done this i want you to take her home and let it idle for a bit
    cause you need to get ready to go for a long drive
  10. now that you have got to the bathroom and are ready to go i want you to find a nice open road where you can do 60mph
  11. now that you are here i want you to act like ther is a road train in front of you doing 50mph
  12. now i want you to overtake this road train applying full power by pressing fully dont on the gas
  13. once over tiaken slow back down
  14. i want you to do steps 11 to 13 twice at least
  15. now go back home and let me know how it went
now something to remember for alwase
  1. as stated i dont think you should race or rev the motor all the time to high once a month give it a good run this will loosen and clean all the rubbish from the motor and everythink will run freeley like it should
  2. dont drink and drive
  3. dont speed
  4. saty safe on the roads you life is to valued
  5. and let me know all progress as i want to know if it helped as i pout in a lot of time and effort to helping people on this site
stay safe and happy new year
ricko

Posted on Dec 28, 2008

mhamlin63
  • 138 Answers

SOURCE: toyota camry 3 s engine. changed fuel filter,

Make sure you use proper gauge oil.

Posted on Jun 25, 2009

  • 11 Answers

SOURCE: 1990 Toyota Camry just stopped running has no spark but has fuel.

check the main fuses under the hood to see if any are blown

Posted on Jul 23, 2009

GARYca
  • 672 Answers

SOURCE: No spark, 1988 Toyota Camry 3SFE 4cyl, 5 speed.

there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks

Posted on Aug 11, 2009

Wolfman304
  • 720 Answers

SOURCE: 1995 Toyota Camry 4 cylinder runs hot

Hi,

Firstly, ensure you have the required 'mixture' of coolant/water (must have required coolant).

Second, I would recommend you re-test all the cooling system sensors again (make sure they're within specifications), in case a new one is faulty.

Third, ensure the new thermostat was of the correct temp setting (they all differ), so that it opens at the required time. Most cooling systems operate within 90 - 100degC.

Fourth, make sure the radiator (and associated hoses) aren't blocked.

If your temp gauge is reading higher than normal, but NOT in the danger zone...then this can be considered normal (especially if you've replaced with new components) and nothing to be concerned about.

However, if the temp gauge IS in the danger zone....then this suggests the coolant is not flowing through the cooling system properly.

If all above components test ok, then it's possible your water pump may not be pumping enough volume.

Cheers,

Posted on Aug 16, 2009

Testimonial: "I appreciate your help...Maybe I should just relace the water pump, that would be the last thing that I would need to replace."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot find the spark plugs on my camry !!!


First, you didn't mention which engine your 1994 Toyota Camry is equipped with. (This is really MUST-KNOW information if you want help with fixing your car.) There is a 3.0L V-6 engine and a 2.2L 4-Cylinder engine. Two TOTALLY different animals! I'll just take the extra time to answer for BOTH of them....

If your Camry is equipped with a 3.0L V-6 engine, You cannot find the spark plug wires because there are none, That engine is equipped with Coil On Plug (COP) ignition. The coils on the left bank (the side of the engine near the radiator) are located under the plastic cover on top of the engine. The coils for the right bank (the side of the engine near the firewall) are located under the upper intake plenum. The plenum MUST be removed to access them. (this is also required to replace the spark plugs.)

If you have the 2.2L 4-cylinder engine, the wires run down the center of the valve cover and the boots go down through the valve cover to the plugs. The other end of the wires attach to the distributor cap at the rear (drivers side) of the engine.

Jul 25, 2011 | 1994 Toyota Camry

1 Answer

Spark plugs do not fire when you spin engine over


distributer cap probly worn inside/coil may be bad along with its plug wire--ignition module may hav failed--sensors on engine cud hav issues--buy a repair manual for maintenance procedures

Feb 22, 2011 | 1994 Toyota Camry

1 Answer

94 toyota camery 4 cyl wont start Ichecked the fuel injectors there ok checked fuel pump works fine replace distributor cap and the ignitor but I dont get a spark at the sparkplugs.henrys


check all efi and ign fuses first...then check pickup coil and ignition coil in distributor w/ ohm meter...since you already replace the ignitor, then mostly likely it's the pickup coil or ignition coil...buy the whole

Aug 22, 2010 | 1994 Toyota Camry

1 Answer

ENGINE TURNS OVER BUT WILL NOT START WHAT COULD THE PROBLEM BE


Is there a check engine light?

Sensors. Use a code reader of a jumper to read codes from your check engine light. Here's some help.
http://www.2carpros.com/kpages/first_things.htm

No check engine light.

Fuel pump or fuel filter. Try to start it, then pull a spark plug and see if you have gas on the plug or just the smell of gas. If you do it probably OK. If you don't, a new fuel filter, then a pump.

Ignition coil, Igniter or Distributor. Pull a spark plug and plug it back into it's spark plug wire. Turn over the motor and see if there's spark. You might need a helper or do it at night. There should be a small blue spark in the spark plug gap. Don't touch it. No spark...bad.
A lot of Toyotas use the same igniter so they are cheap at the junk yard and easy to fix.
Some distributors have the coil in them, some are do not. Check the external coil for spark. If there is none replace it. There are tests that can be made, but you need a book for that. A 1994 Camry probably has miles on it ,so anything you replace is good for an old car. Just don't buy from the dealer. You can get deals on line or at a junk yard.

Aug 15, 2010 | 1994 Toyota Camry

1 Answer

My 1994 toyota camry ,just quit running,it won't start,it will crank ,getting fuel,timing belt is moving what could be the problem


The coil pack may be bad, it will turn over and get fuel, but if the coil don't send spark to the plugs, it will not start. These can be checked by a local parts store and easily replaced by you. Or if you want, you can check to see if you're getting spark. It's not the best way to check but it works. Take one of the plug wires off the plug. Insert a sizable screwdriver in the wire, hold the screwdriver about 1/4" from a metal ground surface while someone turns the engine over. If you see spark, then the coil is good, and the problem lies somewhere else such as the distributor. If no spark the coil most likely is the problem.

Apr 30, 2010 | 1994 Toyota Camry

2 Answers

V6 camry has spark fuel compression run out of fuel


check for compression it should start if it has spark and fuel nothing but compression stopping it

Mar 25, 2009 | 1991 Toyota Camry

1 Answer

1994 Toyota Camry Won't start.


you should check 3 things. AIr, Fuel, and "spark"
your cars could have many problems. Ignition module, fuel injectors, Mass Airflow Sensor.
You should check into all of these 3 things.
a crank-no start could be many things.
it could even be a cam positions sensors resistance going up when the engine heats up. Cracnk- no start means testing. n like i said
The motor is getting Air, There is Fuel being put into the cylinders, and the Spark plugs are firing.

Mar 17, 2009 | 1994 Toyota Camry

Not finding what you are looking for?
1998 Toyota Camry Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...